Get Cell Index
May 24, 2008
I need to check when a cell is clicked and call a function name CalcValue.
However, I need the following:
1. Only cells in the square range from B3 to G8 call the CalcValue when clicked.
2. Determine the index of each cell in the following way:
B3 is (1,1) and G8 is (6,6)
So B4 is (1,2), B5 is (1,3), ..., C1 is (2,1), and so on
Should I do this with WorkSheet_Change and Target property?
I have been working a lot with VB.NET and C# but in VS and not in Excel.
View 9 Replies
ADVERTISEMENT
Mar 28, 2014
See attached formula:
"=INDEX(DATABASE.xls.xlsx!$AT$5:$AT$2001,MATCH(AR10,DATABASE.xls.xlsx!$O$5:$O$2001,0))"
Cell AR10 is my target cell and then there are 15 other cells that populate when the correct information is put into cell AR10, but if one of the other cells does not have any information in it, it returns a "0" (zero). I am trying to get the cell to show blank as when I print I don't want a "0" (zero) in every cell that has not got any information.
2 x cells are showing telephone numbers, 1 x landline and 1 x mobile - sometimes we don't have a landline number, so I want the cell to show blank not "0" (zero)
The cell format is set to "text", but I have tried setting it to "general", "number" and finally settled on "text", but all return "0" (zero) if we don't have a number for them.
View 6 Replies
View Related
Jan 19, 2009
I have a number of identicle tables, that have all been seperatly named. On a summary tab i am using an index match formula to pull back key pieces of data from the table that is identified by cell B2. So if in B2 their is SCB, i would like the formula to apply to the table SCB. The formula (when useing the word SCB works fine):
View 2 Replies
View Related
Mar 25, 2013
I've been working on a payroll program for my small biz. I'm close to done BUT...
When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
Code:
=INDEX(SingleWH!C$6:M$140,MATCH(G7,SingleWH!A$6:A$140,1),MATCH(E$1,SingleWH!C$4:M$4,0))
This is the code in Column F. You can see where it uses the result in Column G to look for a value in sheets("SingleWH").
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
View 8 Replies
View Related
Jan 3, 2014
I have a worksheet that has user fillable cells from B11-AR53. I want the user to be able to attach comments to cells and then to be able to print them on secondary sheet. I know that excel already can perform this function, but it references the cell address and I don't like that method. I want to have the comments on the printout indexed and tied to an index number in the cell. Creating another worksheet with the comments only is perfectly fine. I am currently using this formula (below) to index the comments on the worksheet that they are attached to.
Ideally my report/second worksheet would list-
1 - Comment that is indexed as 1 would be here
2 - Comment that is indexed as 2 would be here
....and so forth
Sub CoverCommentIndicator()
Dim ws As Worksheet
Dim cmt As Comment
Dim lCmt As Long
Dim rngCmt As Range
Dim shpCmt As Shape
[Code] .......
View 5 Replies
View Related
Jul 13, 2014
I am trying to use following string to find result into column F and unable to find reason for Error.
=INDEX($C$2:$C$5,MATCH(D2&E2,$A$2:$A$5&$B$2:$B$5,0))
A
B
C
D
E
F
1
part
code
price
find part
find code
Result
2
x
11
5
y
12
#VALUE!
[Code] ........
View 1 Replies
View Related
Jul 9, 2009
I have a worksheet with several columns and 1,000's of rows. I have code that makes all "good cells" grey (color index 15) and all "bad cells" red (color index 3).
I would like to do 2 things...
1. If ANY cell is RED, cut the WHOLE ROW and "insert cut cells" below the header row (even if ALL other cells are grey), then repeat the process up the whole worksheet until ANY row with a red cell is at the top.
2. Create a new worksheet named "Trouble Cells", copy the header row along with any rows with red cells.
I would like to keep the formatting the same (for example, the title row is always yellow and is "28" high and all other rows are a height of "12").
I would also like to keep the column width of each column in the new worksheet as well.
Excel 2002
View 9 Replies
View Related
Apr 14, 2007
I am trying to get the cell index from a cell reference passed to a function and I have no idea how. eg. In excel
=UDF(D4,...,...,)
What I want is to get is the row and column index for cell D4, not whatever is in cell D4, so I can just click the cell in excel, and drag the formula about etc.
View 7 Replies
View Related
Jul 1, 2014
I have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
View 2 Replies
View Related
Apr 3, 2014
I have an array formula which is working as expected returning the value of column K (offset by -1) if a number of criteria are matched.
[Code].....
The issue I'm having is there are occasionally duplicate values in column W and it's using the first value in its return, which isn't always correct.
Unfortunately due to the limited matches available the only way I can think to identify the correct value is by adding an additional criteria, which is that the correct value would always have a negative in Column X one cell above and to the right of where the value is being retrieved from. If there was no negative it would ignore this result.
Is there any way to add an additional criteria to the formula to stipulate that it must match a negative in column X but one cell above?
View 7 Replies
View Related
May 29, 2014
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
View 3 Replies
View Related
Dec 28, 2009
I am trying to get an Index-Match formula to search a different sheet depending on the value selected in a particular cell using a dropdown list. See the attached workbook.
View 3 Replies
View Related
Oct 12, 2006
Is it possible to have a formula check the color index of a cell?
Example if A1 color index = 6 then X
View 9 Replies
View Related
Feb 25, 2009
make an adjustment to my Formula so that if the Index match locates a cell that is blank it returns a blank cell rather than a 0. I know we need to add in =IF(iserror( but i am aving trouble..
View 5 Replies
View Related
Aug 10, 2012
How can I do the following....if for example I have the following vlookup;
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, 3, false
How can I change the column index i.e. the 3, to reference to a cell.
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, H1, false
The above example doesn't work but I'm sure something can be done using TEXT or VALUE
View 3 Replies
View Related
Jan 28, 2014
As you can see from below I already have a spreadsheet which updates the fill colour of cells based on a certain criteria. This was initially set up in Excel 2003....I have now moved onto 2010 and want to use a certain colour based on it's RGB value. I tried as you can see from below, the part which is commented out (as it didn't work)
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim n As Long, lngIndex As Long
For n = 6 To 842
[Code].....
View 3 Replies
View Related
Nov 23, 2006
Forms – Combobox with Lookup function
From an Excel form combobox I can select one number from a list (from column A). Once selected I want the value in the adjacent column D to show in a text box, with the option to change that text box value, with the change reflected in column D cell.
View 9 Replies
View Related
Sep 15, 2007
I have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
View 6 Replies
View Related
Dec 8, 2012
I have 2 excel files A & B. In cell A1 of file B, I use an index formula to refer to a row in file A. "INDEX('[A.xlsb]A'!$10:$10,1,2)" is the formula used (referring row 10 in file A).
If I update the row number in another cell of file B, is it possible for this formula to refer to that cell to get the row number from file A?
View 1 Replies
View Related
May 15, 2014
Attached file 140515 Matchsheet.xlsx has formula that finds costs matching two criteria.
But the formula depends on me typing in the specific Worksheet Name: So to find the cost for 'Type 1' products, I enter:
=IFERROR(INDEX('Type 1'!$E$5:$F$11,MATCH($C$4,'Type 1'!$C$5:$C$11,0),MATCH($D$4,'Type 1'!$E$4:$F$4,0)),"")
I want the formula to "see" the sheet name as whatever is in a specific cell.
E.g. Cell B4 says "Type 2". The formula will be:
=IFERROR(INDEX('[WHATEVER NAME IS IN B4]'!$E$5:$F$11,MATCH($C$4,'[WHATEVER NAME IS IN B4]'!$C$5:$C$11,0),MATCH($D$4,'[WHATEVER NAME IS IN B4]'!$E$4:$F$4,0)),"")
View 4 Replies
View Related
Dec 1, 2009
Is there a way to reference a cell value instead of using a static value for col_index_num? For example - Instead of telling it to look in the 5th column of Sheet2, I would like it to look in the column were the heading (row 2) in Sheet2 is equal to the value of O2 in Sheet1.
Here's another example -
Normal formula: VLOOKUP(a2,Sheet2,5,FALSE)
What I'd like: VLOOKUP(a2,Sheet2,column where row 2 equals the value in 'Sheet1'!O2, FALSE)
View 7 Replies
View Related
May 3, 2013
I am trying to come up with a macro that will search a range for a specific string of text plus Interior.ColorIndex = 4. The range can have the text in it multiple times but i only want the macro to fire the next line of it if the cell address also has that color. Is there a way that can be done? My code below stops after it finds its first occurrence of the string and moves on to the next lookup. How do i make it look for not only the value but the index color?
View 5 Replies
View Related
Apr 24, 2012
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
View 8 Replies
View Related
Jan 19, 2013
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
View 9 Replies
View Related
Mar 16, 2009
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
View 2 Replies
View Related
Jun 21, 2012
How can I modify the following formula to find the contents of reference cell, for example if the cell reference (G$3) is equal to 9 I want it to use 8 instead.
Code:
IF(ISERROR(INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0))),"",
INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0)))
I tried using G$3-1 but this doesn't appear to work.
View 1 Replies
View Related
Jul 15, 2009
I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B
B1 contains 2
B2 contains "tribbles"
An imaginary function might go like this........
View 3 Replies
View Related
Jan 7, 2010
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies
View Related
May 30, 2014
code that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
View 1 Replies
View Related
Oct 8, 2009
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
View 9 Replies
View Related
