When the macro is run, it works with the exact amount of data that I've entered.
However, because I have specified a specific range, if I add a row or column of data to the spreadsheet and run the macro again, it throws the whole thing off (certain cells get formatted when they shouldn't and others aren't formatted)
How do I tell the macro to look in the spreadsheet for varying ranges of data and format those cells?
I need to find text within middle of a string. Character before required text is say AAA Character after required text is say BBB Text required can vary in length. Extract text and place in another column.
All text in a single column, required text not in every line. but does repeat.
I've set up a filing system which saves sheets/ workbooks based on the value of a cell - Range("B1") Everything works great apart from when ThisFile String length exceeds 31 characters which you may know is the max useable character length for a sheet name - I had no idea! 8-0
Is there a way i can check if string length exceeds 31 characters then, if it does, shorten it to 31 characters?
i have tried to create a userform thru which data is to be entered. so that the data will be printed on a worksheet. here there are few text boxes, in which the number of digits should be equal to 14. after filling the userform when i click the print button if it is less than or more than 14 a pop up msgbox should be displayed with OK button and the cursor should go back to that particular text box. i have written the following code, but it has a problem. even if the total no of digits are 14 the msgbox is displayed.
say the text box name is Roll no
If txtRollNo.MaxLength 14 Then MsgBox "Roll No should be of 14 digits", vbInformation + vbOKOnly txtRollNo.SetFocus Exit Sub End If
I need to parse out the different parts of Column M.
In Column R -- "Close Date", I'm successfully using: =LEFT(M2,FIND(" | ",M2)-1)
...to extract the close date of the donation.
In Column S, I want to list the donor name--which is all of the text after " | ", and before the "-".
I don't need anything after the hyphen, and fortunately in this data, no one's name has a hyphen in it.
The Close Date is working fine for the LEFT and FIND functions, but for the life of me, I can't seem to get MID to work for the variable-length text. The text will always start in the same position -- 14, as the date and delimiter are standardized. And the last 5 characters of the text are not variable in length, so they can be cut out completely.
How do I use MID to extract everything starting at position 14, and stopping 5 characters short of the end of the text?
I'm trying to avoid using merged cells or text wrapping with altered row height to display some text in multiple rows - similar to using centre across selection to have a header across multiple columns without merging. The guys that use the sheet type a comment that is relevant to five rows and the easy solution here would be to just type the first portion of the comment in the first row (about 30 characters will display in the column width available), then put the next 30 characters in the next row and so on but the guys keep getting lazy and merging the cells so they can type the comments more easily. I can lock the sheet or force validation but I think there's a better solution.
I can effectively "wrap" the text across the five rows the header is relevant to by using a formula to pick up everything except the first 30 characters of each cell. Ie if they type whatever they want in cell B16 then I can use this formula to break it in to 30 character lengths to "wrap" it in to the next four rows:
And I'm sure it would be easy enough to use search with the formula to break it where there is a space in the text so partial words don't flow over.
BUT because the text ends up slightly different widths I want to use formats to force only 30 characters to display (whilst keeping the remainder of the text string intact). I can't figure out the syntax to format only 30 text characters to display but you can easily do it with numbers and dates and so on.
I use VLOOKUP with text (to return comments made by people that I have copied in another sheet). The problem is that sometimes, it doesnt copy the whole comment. Apparently there is a limit for the amount of text VLOOKUP can copy: after a LEN() test I have found that I cant copy texts longer than 255 characters.
Is there a simple way to make the VLOOKUP work even if the text is more than 255 characters long ?
I am having difficulty with creating an IF formula that will only show 9 digit numbers. If the cell the formula is looking at has less or more than a 9 digit number in it, or the cell ha no value, the result will be blank.
I have a cell with 200+ character, I only want the 40 first character is there a function that will give me only those 40 first character or do I have to use a "=len" and manually remove the extra characters?)
I want to create a 6th column that looks to the columns on the left with data in ti and concatenates all data in the 5 columns and puts it into one cell in the 6th column however put a space between each break of data so that it can be distinguished which bit of data was in what column previously.
The challenge is the new 6th column can only contain 30 characters - When it exceeds 30 characters then create a 7th column and put the rest of data in the 7th column, again the 7th column can only have 30 characters so if exceeds this then put the remaining characters in a 8th column
There will never be more than a total of 90 characters in the original 5 columns so there will only need to be scope for a maximum of 3 additional columns
So for example
Column A had two words in it that totaled 20 characters (the space between the two words is also counted as a character) Column B had two words in it that totaled 20 characters (the space between the two words is also counted as a character) Column C had a word that contained 10 characters Column D had a word that contained 5 characters Column E had a word that contained 10 characters
Then the result would be
Column F would only have the data originally held in Column A (because it can't include Column B's data as this would exceed the 30 characters) Column G would have data that was originally held in column B and column C - with a space between B and C data Column H would have data that was originally held C, D and E - with a space between C, D and E data
Another point to consider is if in one of the orginal 5 columns had say 3 words in it and lets say the 3rd word is the word that exceeds the 30 character limit, then the whole of the third word is to be carried oved to the next new column, I can't have words cut in hlaf with one half in Column 'F' and the other half in Column 'H' for example.
I am using the code below to import a fixed-length text file into Excel. As the macro is written, it imports starting at the first line of the text file. How do i tell it to start importing at line 1000 and above?
The text length I want it to perform the action on is highlighted with "<<" if the length of text does not meet the required number then I want the statement to skip and move onto the next one.
I have the text to column code already done with relative references however the long text string I want the statement activated on is not always present which means that the pattern (0,3) is not always consistent.
When a number is entered in cell S3, it triggers formulas throughout the worksheet to populate the it with information from another sheet. If the length of the text in B6 is greater than 80, the font size for B6 only should be 8; if the length of the text in B6 is less than or equal to 80, the font size for B6 should be 10. Regardless of the length of the text in B6, the font size for the rest of the sheet should not be changed.
I tried the following Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address "$B$6" And Target.Count > 1 Then Exit Sub Dim cnt As Long cnt = Len(Cells(6, 2).Value) If cnt > 80 Then Cells(6, 2).Font.Size = 8 ElseIf cnt < 80 Then Cells(6, 2).Font.Size = 10 End If End Sub
Am trying to devise a formula that will allow me to extract a date (not stored in date format or recognizable by excel as such: "DEC1/09") and then manipulate it so that excel can recognize it and change it to a "1-Jan-01" form. Problem for me is that functions such as LEFT MID and RIGHT are very specific and sensitive obviously to any additional characters. some of my dates are preceded by "CAN BND 4.25/09"; "CANB BND 4.25/09"; "BC BND 4.25/09" and so on, you get the idea im sure that they are of differing lengths. The dates are equally strewn around as some (these are bond maturities) are 1st of the month while others may hold dates in the middle-end...15th, 30th, 31st etc.
is there a formula that will recognize the dates in the text strings regardless of string length and then a subsequent formula to manipulate the date to proper format?
i.e. "CAN BND 4.25/09 DEC1/09" and "CANB BND 4.25/07 JUN15/07"
Converted into: "01-Dec-09" and "15-Jun-07"
Not that the other parts of the string don't matter, already have macro that can recognize and rip bond coupons.
I think it's an easy one but for the life of me I can't get around it. ccasionally while re-typing data in fields with the intention of saving-as a new file, an error message appears saying "no more than 20 characters" This happens even when the number of characters is LESS than 20! I have tried clearing cell contents, copying & pasting, re-setting conditions/parameters for columns/rows etc., and nothing seems to work with any consistency. Instead of looking for a work-around solution I'd like to find the actual corrective action.
I need to write a Excel VBA (2003) code that can arrange the cells of one column based on the character length. An example is this:
Column Data before Running VBA
(Column A) cat oranges apple
Column Data after Running VBA
(Column A) cat apple oranges
I been doing this manually by using the LEN() command in an adjacent column (Column B) and sorting Column A. based on Column B. However, I wish to do this all in a VBA code that does not rely on how many rows are in Column A. I have dozens of excel sheets with various number of rows for Column A. Therefore, the VBA code has to also figure out when the last non-empty row is in Column A. Can anyone offer their suggestions to my problem?
i need a formula that looks up a range on sheet 1 coloum a and returns the value in column b, unless the value in column c is less than 5 letters long/ or not equal to a time format if this is the case it should return the value in column c [code] =IF(LEN(VLOOKUP(A6,'look up'!A6:C18,3,FALSE)>6),VLOOKUP(A6,'look up'!A6:C18,3,FALSE),VLOOKUP(A6,'look up'!A6:C18,2,FALSE)) [code]
this is my effort but it returns value in the the middle every time
Excel 2007-2010. I'm using match(string, range,0) but there must be a limitation on the length of the string since I know the string is in the range but it returns #value as if it is not found. Is there a VBA solution to get around this without having to loop/cycle through the entire range?
Can anyone provide a formula to be used in data validation that will control text length (6 digits) and restrict duplicate entries. The best formula will prevent anything other that 6 digits, but question the user regarding a duplicate entry.
For example: if the user enters 123456 no problem, but if 12345 is entered, Excel validation would not allow. If the user enters 123456 again, Excel's validation window would allow but the window will pop-up and ask to confirm.
Is there a way to change the text in a cell to proper apart from 2/3 letter words which I want to keep as upper? Basically can it ignore all words that are 2 or 3 letters long, but change all other words to proper text?
I have the following issue. I have a list of strings. Each string contains certain characters that are exactly the same for all strings, some characters are different making the string longer (in some cases). What I need to do is extract some combination of characters from each string. The strings look like this:
AB & CDE & FG & I mmmm yyyy.HIJK AB & CDE & FG & II mmmm yyyy.HIJK
The part "AB & CDE & FG & " (incl. spaces) is the same for each string. The next part contains a roman count from I to VII, causing the length of each string to vary. The "mmmm" part contains the current month spelled in full e.g. December. This part differs as well, for each string. The "yyyy" part contains the year in four digits, e.g. 2007. The part after the dot is the same for each string again.
What I need to do: - is to extract the month and assign it to a new string - extract the year and assign it to a new string - extract the roman number, translate it to a normal number (II -> 2) and assign to a string (or integer).
Can I limit the text length in a cell that contains a formula? You may say "Limit the text length in the input cell". That can't be done because the formula in the resultant cell takes text from two other cells in addition to the input cell. I need to limit the overall text length to, let say, 50 characters.