I have a UserForm that contains both a combobox and textbox. I'm wondering if there's a way for the cursor to automatically goto the textbox after a value in the combobox has been selected. I'm looking for something equivalent to either manually selecting the textbox or pressing "Tab."
View 9 Replies
I am not the best at this, but we recorded a macro and we want to delete whole rows after we 'control' find something from a specific column. WHen we recorded our macro, it finds the first instance and we hightlight the whole row and 'control' 'shift' 'end' and delete all of the rows. We did this because we sorted and made sure the information we wanted to delete was at the bottom of the worksheet. we realized that each day the spreadsheet we pull from an ip address gets bigger and the row that we started from to delete starts on a different row each day. How do we get all the information to delete everyday, even when the row that Owned starts on changes? ...
View 9 Replies View RelatedIs there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies View RelatedI have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies View RelatedHas anyone out their ever seen an Calendar type of control totally built in an Excel vba UserForm?
My problem that I’ve tried to resolve for some time is utilizing some type of pop-up calendar to eliminate format issues in my published Excel forms. I have tried a number of calendar controls but all have to be registered on the local machine and this cannot be guarantied for every machine.
If someone could direct me to a vba UserForm that has this built in that might do the trick. Or is their another way to deal with this?
I have 2 macros: 1 controlled by a checkbox activex (PA_03) and the other a combobox (PA_03_rows) in a worksheet. I display the results from PA_03, and the user than then increase or decrease the number by using the combobox. But when I change the value (PA_03_rows.value = x) it causes the macro to jump to the macro.
I don't think it did initially, but it does now. According to another post, I saw it shouldn't do it! Is there something I'm just not seeing here?
Private Sub PA_03_Click()
Dim message, title, default, numberRows
Dim PA_rows As Integer
Application. ScreenUpdating = False
TakeFocusOnClick = False
Worksheets("sheet1").Select
ActiveSheet. Range("a15").Select
If PA_03.Value = True Then Goto Unhide:
If PA_03.Value = False Then Goto Hide:
Unhide:
message = "Enter the number of input rows required (1 to 50)"
title = "Non-Featured Standard Input"
default = "1"
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
View 5 Replies View RelatedHere is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View RelatedIs there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I have a worksheet that contains two basic columns of data, A and B. What I would like to do is based on the value in column A, I would like to copy the contents of column B to a textfile (preserving the basic line structure and hopefully without any extra characters like quotation marks attached). So for all the values in column A = 'Account', Id like to take all the corresponding values in Column E (for example) and save them to the same file, preferably where the filename itself as 'Account.xyz'. And I would like to do this for all unique values in Column A, that is do it for 'Account' and 'AccountPrivilege' etc. Note Column A is essentially presorted alphabetically already. There are actually 1000s of rows with hundreds of unique A values so Id like to find a way to automate this process.
A
B
1
Account
Company Information
2
Account
Company
[Code] ........
I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
So, this works perfectly by itself: {= SUM(IF(MONTH(I4:I17)=1,G4:G17,0))}
And this works perfectly by itself: {=SUM(IF(YEAR(I4:I17)=2007,G4:G17,0))}
But this doesn't work at all: {=SUM(IF(AND(MONTH(I4:I17)=1,YEAR(I4:I17)=2007),G4:G17,0))}
SUM by both a specific month, and a specific year from a single date field?
I have a row (will always be row 3) where each cell contains a day of the week, the days repeats for a year or so, making the row almost 400 cells.
Like this,
Mo - Tu - We - Th - Fr - Sa - Su - Mo - Tu - We - Th - Fr - Sa - Su - and so on...
Though, A3 doesn't have to be "Mo" because the days in this case can change (A3 can start with "Tu"), hence I think I need a macro.
So if this row contains a weekend, "Sa or "Su" I want all the cells in the column beneath that which contains a specific value to be cleared.
Example, if "Sa" or "Su" has 3 values in the columns under them, all the values that contain "X" or "Y" has to be cleared.
Like this:
Rows (1,2,3...,)
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su - .. and so on..
4 A --- B --- X --- Y --- X --- B --- Y
5 A --- B --- X --- Y --- X --- X --- X
6 A --- B --- X --- Y - --X --- Y --- C
After the macro it should be:
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su
4 A --- B --- X --- Y --- X --- B ---
5 A --- B --- X --- Y --- X --- ---
6 A --- B --- X --- Y - --X --- --- C
Notice the two examples in the excel file.
Excelforum.xlsx‎
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies View RelatedCurrently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):
Find_Range("A", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("B", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("C", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("D", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("E", Columns("J"), MatchCase:=True).EntireRow.Delete
although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:
Range("1:65536").Select
For Each cl In Range("J:J")
If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then
Rows(cl.Row).Delete
End If
Next
but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...
I need a code that will delete a row if it has a specific text in a specific column.
In this case in column W if there is anything that starts with '>TC' I need that entire row deleted that its in.
Is there a way to make a macro convert '1' to Yes and '0' to No? I have 2 columns (F and G) in a worksheet that contain the value of 1 or 0, but I need to convert them to Yes or No. I have tried some fo the samples but they pop up a msgbox which is not required.
View 2 Replies View RelatedI'm trying to match certain transactions between two bank accounts, where the only like values are going to be date and disbursement/deposit amount. Obviously vlookup will not work here because there are many duplicate values. In the attachment I put in a Vlookup in the Account 2 tab to try and demonstrate what I'm trying to do exactly, which is match deposits in Account 2 with Disbursements in Account 1.
After looking around I found that maybe a combination of INDEX/MATCH would work here but how to get it to work or even if it is appropriate in this situation.
let say in cell A6 i have a list
SnG
Cash
MTT
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
I'm trying to use a conditional format on a range of cells so that if there is more than 1 "A" contained in any given row, the cells containing the "A"s are highlighted (e.g. red)
I've tried:
=COUNTIF(B2:K4,"A")>1
but it doesnt work & now I'm stuck.
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies View RelatedI'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken
Cow
Donkey
Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I have added a control (a check box), it has called itself "Check Box 1", can I change it's name? Reason I want to do this is that I am using a macro to clear the check boxes, and therefore using a loop and I want the next control to be 5, not 12.
View 3 Replies View Related
