I have a lottery pool in sheet 1 in which i have the names of the people and their number picks. In sheet 2 i have the lottery results.
All i want is to be able to highlite(adding a backround color in the cell) to the matching numbers in sheet 1.
I have a sheet (sheet1) of around 900 rows with data in columns A-K. Column B contains a unique value.
Sheet2 contains data which needs to be highlighted in sheet1 and each row in identified by a unique value in Column B.
sheet1.PNG
sheet2.png
In sheet 1, I only want to highlight the cell which exists in sheet 2 for the matching reference number in column B. For example, in sheet2, the value 'PM328491CN' exists and the value 'CN' is present in cell c2. I want the cell that contains this value in sheet 1 to be highlighted (cell C6).
So, find the matching reference, the highlight the cell in the row which is present in both sheets.
I have a row D2:ND2 where each cell contains a date from October 1st through to September 20th). I also have a column NI3:NI13 that contains various dates such as Easter or bank holidays. Would it be possible to use conditional formatting (or something else) to highlight all rows below D2:ND2 if the dates specified in each cell in D2:ND2 match any of the dates in column NI3:NI13?
View 4 Replies View RelatedI have two cells with values that are strings.
I would like to know of a macro that can compare each two cells(start from E2 and compare with E3)to see if the values are NOT equal.
If they are equal, do nothing and if they are NOT, highlight the value.
Example:
compare E2&E3, E4,E5,E6,E7,.... if for example E2&E3, E4,E5,E6,E7,.... each hat same string, do nothing, but if they were not the same highlight it with red.
This code checks two cells and highlights one cell when there is duplicate, I like the opposite one, but don't know what to change!
Code:
Sub CompareCells() Dim r As Range, cell As Range Range
("E2", Range("E" & Rows.Count).End(xlUp)).Name = ("MyRange") Range("MyRange").Select
' clear all colors from selection Selection.Interior.ColorIndex = xlNone
' loop through cells and compare Set r = Selection Set r = Selection.Resize(r.Rows.Count + 1)
For Each cell In r If cell.Offset(1, 0).Value cell.Value Then
cell.Offset(1, 0).Interior.ColorIndex = 3 End If Next End Sub
Please see the attached example. I'm trying to highlight cells only if 2 values in the row match 2 values in another row. If a book title/author combination matches that of another title/author combination in a different row, it would highlight. Some alternate rows will contain different titles by the same author, and some rows will have like titles by different authors...but they should not highlight.
The only situation where highlighting would occur is if the title/author pairing appears in another row.
I'm trying to decide if this would be a conditional formatting/highlighting rule, or if it would be a macro/vbs?
I'm using Excel 2013.
Pairing example.PNG
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI’m trying to assign building and office keys to various personnel, by appointing different classification levels to each set of keys given out. Very similar in the way an administrator would assign permission levels to individuals.
Question:
•Is there a way to pick up an array of non-sequential numbers from one sheet (values 1 -36)
•Find those values which are assigned to columns laid out as a table,
•Then highlight those found values
I’ve attached a dummy sheet to illustrate my question.
I have not attempted coding this because I wouldn’t know where to start.
Theoretically is this even possible?
In the attached worksheet I have UserForm2. When I click on open compare form button on the menu sheet it opens UserForm2, I would like the information I select in the first 7 combo boxes Vegetable - Ball on UserForm2 to loop through the data in the database sheet Columns A:G and compare the entries to the non empty/not blank cells in each row. If the form contain data that matches all the non empty/not blank cells in a row in the database sheet then it is a match and should show the label and display the message. If the form entries does not match to the non-empty/not blank cells in any of the rows on the database sheet then do nothing.
The problem I am having is getting it to loop through the sheet and bring back the right results. It is only matching on row 2 of the database sheet when I select cabbage in the vegetable combo box and apples in the fruit combo box . I cannot figure out how to get it to loop through all the rows for the range I want to compare (A2:G7) - I need this range to be flexible so as data is added it will expand to read all added rows.
The code is on the btnSave_Click() for UserForm2
I attached the spreadsheet and I am explaining what I want to do and the expected result.
Fruit
Fruit Type
Vegetable
Games
Toys
Cereal
Ball
[Code] .....
What I want to do is loop through the Database sheet and if the fields on the form contain all the values in any row of the Database sheet, excluding empty cells in the Database sheet, then display a message.
So if on the form I selected Broccoli fron the vegetable combo box, Cricket from the games combo box, puzzles from the toy combo box, bananna from the fruit combo box, grits from the cereal combobox, and baseball from the ball combo box, in the databse sheet tabel shown above the match would be row 6 since the values for vegetable, game, toy, fruit, cereal and ball on the form matches what is on row 6 of the Database sheet. It does not matter what other fieds are selected /filled in on the form, the match should only take into consideration the populated cell in each row of the database sheet.
So, if the user enters Apples in the fruit combo box and Cabbage in the vegetable combo box but had blank or something other than bike in the toy combo box on form it would be a match to the Database sheet row 2, regardless of what the user enters in the remaining fields on the form
If the user enters Berries in the fruit combo box, Blueberry in the Fruit Type Combo box, Carrot in the vegetable combo box, and Grits in the cereal combo box it would be a match to Database sheet row 3, regardless of what the user enters in the remaining field on the form .
If the user enters Apples in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form itwould be a match to the Database sheet row 5, regardless of what the user enters in the remaining field on the form .
If the user enters Grape in the fruit combo box, Carrot in the Vegetable combo box, Cards in the game combo box, and football in the ball combo box on the form it would be a match to Database sheet row 7, regardless of what the user enters in the remaining field on the form.
If the user enters Kiwi in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form it would NOT be a match to the Database sheet because the Database sheet does not have a row that contain Kiwi, Cabbage, and Bike.
So basically, if the entries on the form match the exact values for all the non-empty (blank) fields for any row in the Database sheet, then it is a match.
-If the entries on the form do not contain an exact match to all the non-empty (blank) fields for any of the rows in the Database sheet, then it is not a match.
-If it is a match show the label and display the message box
-If it is not a match the do nothing
I am trying to compare two cells and if they match then I want to fill in a list on sheet one from sheet two.
I have the absolute working when I compare one cell to one cell, but I can't get it to compare one cell to a range of cells (two weeks of days)
Here is the absolute one I have working:
=IF(C1='Data Sorted'!A1,'Data Sorted'!A2,"")
Here is what I tried that doesn't work:
=IF(C1='Data Sorted'!A1:N1,'Data Sorted'!A2,"")
1. I want to highlight cells on a form so that a user knows which cells to fill out.
2. When they print the form I do not want the cell shading to print.
I am trying to write a macro which highlights all the cells with any reference to other cell. The macro should highlight a cell with formula like = 3 * A25 but not highlight a cell with following formula. = 3 * 0.4535566. 'Hasformula' property is not useful here as it can't distinguish between above examples.
View 3 Replies View RelatedI have userform1 where new data is inputed.
Userform2 is used for Edit purpose.
Both work fine.
I have Label which is visible if date in textbox is less than TODAY()..... ( which is textbox28).
Following is the code:
It will not work correctly due to date format of textboxes & cells??? Tried to resolve it but no success yet.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedBasically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total
[Code] .......
I have a workbook with data on sheet1 and a summary on sheet 2. I want to use two drop down boxes on sheet 2 (B3 and B6) to look up matching data from sheet 2. What formula is best to enable these two look_up values to be used? I saw an example where the two values were separated by a comma within {} i.e. {B2,B6}, but only got an error when I entered the formula into my Excel 2010 sheet.
I have previously used VLOOKUP, but this comes back saying I have to many arguments. I can attach the workbook if that makes it easier to explain.
Need to autohide cells in sheet 2 and 3 based on sheet 1 cells that are hidden. (Example if i hide 150 switchgear on SOV tab it will hide 150 switchgear in Customer and Foreman sheets as well).
View 1 Replies View RelatedI want to try and create a macro that will start with the value in the first cell of one column and find it another column and highlight both itself and the other value and then move onto the next value in the cell below and repeat the same process until it reaches the end of the column. This would result in leaving unhighlighted cells as new items as it were that did not exist before.
View 2 Replies View RelatedI am running a macro to make some changes to certain cells in a spreadsheet (formula changes)
Is there a code I can include within the macro so that all cells that change are also highlighted in yellow?
I have data in cells that are separated by pipe characters. What I need to do is to highlight the cells that are not the same. For instance, if a cell contains xxx|xxx then the cell is not highlighted but if a cell contains mmm|mmm|xx then the cell needs to be highlighted.
Sheet1 Â A1xxx|xxx2rrr|rrr|rrr3ttt|ppp4OO|OO|OOO5zz|zz|zz|tz6aaaaa|aaaaa7jj|jj|jj|jj|jj|jj8yy|yy9ww|tf|mz
I have a workbook and trying to copy all the way down the workbook using F4 blanks etc. When I highlight the column I want to fill in its not highlighting all the cells.
View 9 Replies View RelatedI have a spreadsheet that I need a m acro for, that will look at cell C13, if it is a 0 (zero) then hightlight cell C1 yellow. And so on, if C14 is zero, highlight C2..
Also look at the cells below,
cell D13, if it is a 0 (zero) then hightlight cell D1 yellow. And so on, if D14 is zero, highlight D2..
I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
I'm after a formula (or similar) that if cell H1 has no data in then cells A1:G1 must be highlighted in a colour, considering A1:G1 has data in. And then when data is input into cell H1 then the highlight disappears. is this possible?
View 8 Replies View RelatedI am trying to create a special workbook for my asphalt project. After inputting all of the day's truck information, I want to add up the total tons and then for the program to highlight which truck puts the total tonnage at or slightly above 500 tons. I'm not sure if "isolating is the right term to describe what I wish to do or not, but my whole workbook will be based off of similar actions like what I'm requesting. Here is a portion of my sheet:
Truck #Tonnage
1 21.93
2 22.84
3 23.21
4 24.89
5 24.8
6 25.01
7 24.88
8 24.44
9 23.14
10 24.53
11 22.03
12 22.61
13 24.9
14 24.69
15 24.85
16 24.81
17 24.82
18 22.55
19 22.18
20 24.52
21 22.49
22 24.81
And so on.....
I have a sheet that I have item numbers in a column that i want to highlight and change color when they are not the same. I want the colors to be unique to each number. I am currently using conditional formatting (Format cells based on their values (3-color scale)). I works alright but not perfect.
condition formatting.PNG
Is there a way that when a cell is selected it will highlight the cell and all of the cells along the same row?
View 12 Replies View RelatedI am still new to VBA. I am trying to use VBA to search given rows for percentages above 0.81%. When it finds cells with percentages 0.81 and above it will high light the cell with red.
Here is what I have done so far ...
