Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total
[Code] .......
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I'm trying find a way when running a report that continues to grow weekly - to either run with a script or a specific formula. There's certain cells that I'm trying to capture but the main thing is it's very time consuming and is tracked onto a separate workbook. Here's what I'm looking for a hand on:
Weekly list of 20,000+ rows - includes customer information - names, addresses, phone, account #, order #, etc I sort my list by address and then look and manually count the duplicates. Once duplicates are located I enter on a separate workbook along with the most recent order number. There has to be a faster way.
I am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Here is some code I have tried to no avail: ....
I am trying to count unique values of the column tienda with the unique values of the column promo. Output expected below table.
promotienda
pablo a
pablo a
pablo b
juan c
juan c
juan c
jesus d
jesus r
Output:
Pablo: 2
Juan: 1
Jesus: 2
From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.
View 7 Replies View RelatedHere is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?
I have a lottery pool in sheet 1 in which i have the names of the people and their number picks. In sheet 2 i have the lottery results.
All i want is to be able to highlite(adding a backround color in the cell) to the matching numbers in sheet 1.
Getting a formula or macro that count the number of blank cells between 2 cells with data (numbers) in 1 column. E.g.
1
Blank
Blank
2
Blank
Blank
Blank
3
...
In this case the blanks between 1 and 2, between 2 and 3 to be displayed in an adjacent column.
I want to try and create a macro that will start with the value in the first cell of one column and find it another column and highlight both itself and the other value and then move onto the next value in the cell below and repeat the same process until it reaches the end of the column. This would result in leaving unhighlighted cells as new items as it were that did not exist before.
View 2 Replies View RelatedI need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI need to do a macro that will open a search window, the user would select a folder and it will search for a .csv file within it. Then after locating the file, it would automatically load it into a specific sheet in the workbook.
View 9 Replies View RelatedI am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
I have tried to figure out how to count all cells in a column and subtract any cells that contain characters with a red font. I'll attach an example. I need code that will work in VBA so that in the case that the column does not contain any cells with red numbers it won't come up with a debug error.
In excel I normally do this manually with this formula: =count("") I normally highlight all cells except the red ones. See attachment for example.
Also, the # of rows is never the same. Some files will be 100 rows, some will be 1000, depending on the store's file we get. so the code would probably have to contain something like .lastactiverow or something.
I am trying to create a dynamic chart with the offset and counta functions. I want to automate the data population and use formulas to get new data. I need to know how to use counta in the named ranges to not count cells with formulas that return "".
View 9 Replies View RelatedI have a column of continuous (no blanks) data in Column A and data with blanks in column B as shown below:
Col.A Col. B
ABC
1/1/01 .55
1/2/01 .66
1/3/01 .77
XYZ
2/1/01 .88
2/2/01 .99
2/3/01 .44
2/4/01 .23
I need either VBA or an Excel function to count the cells in column B between blank cells and put the result of this count in the (formerly) blank cell. For instance, 3 would show up next to ABC and 4 next to XYZ.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies View RelatedI want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
I have four columns of data that I'd like to compare. If none of the cells match, then I'd like to add all the cells together. If all the cells are different, then I'd like the number to match the others. Here's the problem: if two or three cells match, but the others are different, I'd like to take one of the matching cells and add it with the cell(s) that does not match.
Examples (each number is a cell):
1 2 3 4 = 10
1 1 2 3 = 6
1 1 1 2 = 3
1 1 1 1 = 1
I'm looking through the threads and found an interesting line of code (IMO anyay)
copy row of data if match is found in other worksheet.
v = Application.Match( Cells(i, 2), r, 0)
Why is that when I type 'application.' match doesn't appear using intellisense?
I have a list of account numbers is row A. If the numbers match I want to go to column D and sum the total. I have searched the forum and can't find anything formulas specific to add a column when the criteria change (in column A). Is this possible in VB.
I am trying to find a way to match formulas from two cells (not the value but the formula). I am creating a smaller excel test where they can enter a formula (C3) and directly see if it matches the correct answer (F3) All I have found is formulas containing value comparison.
View 4 Replies View Related