Numeric Values From One Sheet To Highlight Cells On Another
Feb 10, 2010
I’m trying to assign building and office keys to various personnel, by appointing different classification levels to each set of keys given out. Very similar in the way an administrator would assign permission levels to individuals.
Question:
•Is there a way to pick up an array of non-sequential numbers from one sheet (values 1 -36)
•Find those values which are assigned to columns laid out as a table,
•Then highlight those found values
I’ve attached a dummy sheet to illustrate my question.
I have not attempted coding this because I wouldn’t know where to start.
Theoretically is this even possible?
View 4 Replies
ADVERTISEMENT
Jul 2, 2014
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies
View Related
May 29, 2013
I'm trying to find out exactly how I can use sum product on cells that have text and numeric values. Here's my sample data (6 points):
TN FX1576 20, TN FX1577 25, AZ FX1577 30, AZ FX1577 35, FW FX 1577 40, and FW 1577 45.
I wish to do the following: I want to sum all of the right numeric values based on the first two text values(TN, AZ, or FW). I want to sum these numbers to their respective total cells at the top of the page. So far I can sum the numeric values fine using the following formula: =sumproduct((right(range,2)*1) but when I try to differentiate between the respective locations (AZ, TN, or FW) I get an error message.
Attached is an example of what I'm trying to do along with the formula I'm currently using and yellow shading to represent where I want my respective sums to go.
ExA.xls
View 1 Replies
View Related
Jul 11, 2013
I have a sheet (sheet1) of around 900 rows with data in columns A-K. Column B contains a unique value.
Sheet2 contains data which needs to be highlighted in sheet1 and each row in identified by a unique value in Column B.
sheet1.PNG
sheet2.png
In sheet 1, I only want to highlight the cell which exists in sheet 2 for the matching reference number in column B. For example, in sheet2, the value 'PM328491CN' exists and the value 'CN' is present in cell c2. I want the cell that contains this value in sheet 1 to be highlighted (cell C6).
So, find the matching reference, the highlight the cell in the row which is present in both sheets.
View 1 Replies
View Related
Jul 17, 2014
The solution can be either in VBA or conditional formatting, if possible.I have product names on column A and weeks as from column B where I have the quantity sold. So, every week I'll have an additional column.
A B C D E ...
Product Week1 Week2 Week3 Week4...
What I need:
If the cell is filled, highlight it in green.
If the gap (empty cells) between weeks is =1, highlight it in yellow
If the gap (empty cells) between weeks is >1 but <2, highlight it in orange
If the gap (empty cells) between weeks is >2, highlight it in red
The attached example better illustrates the needs : Example.xlsx‎
View 4 Replies
View Related
Dec 24, 2008
I need to creating a macro to highlight entire rows if a cell in that row (C) contains specific values.
View 4 Replies
View Related
Jan 3, 2013
I have two cells with values that are strings.
I would like to know of a macro that can compare each two cells(start from E2 and compare with E3)to see if the values are NOT equal.
If they are equal, do nothing and if they are NOT, highlight the value.
Example:
compare E2&E3, E4,E5,E6,E7,.... if for example E2&E3, E4,E5,E6,E7,.... each hat same string, do nothing, but if they were not the same highlight it with red.
This code checks two cells and highlights one cell when there is duplicate, I like the opposite one, but don't know what to change!
Code:
Sub CompareCells() Dim r As Range, cell As Range Range
("E2", Range("E" & Rows.Count).End(xlUp)).Name = ("MyRange") Range("MyRange").Select
' clear all colors from selection Selection.Interior.ColorIndex = xlNone
' loop through cells and compare Set r = Selection Set r = Selection.Resize(r.Rows.Count + 1)
For Each cell In r If cell.Offset(1, 0).Value cell.Value Then
cell.Offset(1, 0).Interior.ColorIndex = 3 End If Next End Sub
View 3 Replies
View Related
Dec 6, 2006
I have a lottery pool in sheet 1 in which i have the names of the people and their number picks. In sheet 2 i have the lottery results.
All i want is to be able to highlite(adding a backround color in the cell) to the matching numbers in sheet 1.
View 9 Replies
View Related
Feb 20, 2014
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
View 2 Replies
View Related
May 6, 2008
We have a simple holidays workbook, with seperate sheet tabs for each member of staff in the department to note down there holidays in a calendar.
The 1st row (from B1 and onwards) contains the day numbers of the month, ie. 1 - 31
The 1st column (A2 downwards) shows the 12 months of the year.
The holidays are then marked in the relevant cell matching the dates required. The codes we use are F (full day), A (morning), and P (afternoon). A countif adds up all the occurences of the various codes and totals the ammount of used/remaining days.
Hopefully that drew a picture.
The problem is, each sheet only shows the holidays marked down for that person. There is no way of checking for a "clash" (ie. 1 member of staff off on the same day as another) without flicking to the other sheets and checking yourself.
how can I get a cell shading to automatically show up on the sheets, if there is a holiday noted down (ie a value, A, P or F) in one of the other sheets?
View 9 Replies
View Related
Mar 25, 2014
I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
View 3 Replies
View Related
Mar 5, 2014
In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
View 5 Replies
View Related
Jan 20, 2009
When using the replace rule in Excel, you can use "?" to represent a standard variable, e.g. if you had the text "Bottle 100g", and you set the replace rule as "?g", it would delete the "g" and the four characters before it, leaving you with "Bottle".
However, if I have lots of replace rules to make in a file, and I only want to eliminate the numerical values before a letter, how do I go about doing this?
For example, if I had the text "Dog food 10g", and I made a replace rule "??g", it would leave me with " food ". What I would really need, is a way of taking away the numeric values before the "g", which would give me "Dog food".
Therefore, is there a unique identifier for numeric and/or text values?
View 10 Replies
View Related
Feb 3, 2010
I need a left side padding for numeric values to keep them in 4 digits
ie 1 becomes 0001, 25 becomes 0025 and 345 becomes 0345. Following is the custom number format I tried and it fails.
[<10]"000"#;[<100]"00"#;[<1000]"0"#
View 3 Replies
View Related
Aug 13, 2012
I have the following code and I am really confused to, why its not reading numeric values from the code below:
Code:
Sub MG08Aug32()
Dim Rng As Range
Dim Dn As Range
Dim n As Integer
Dim Num As String
Set Rng = Range(Range("E2"), Range("E" & Rows.Count).End(xlUp))
[code]....
I desire the following output below:
97.25-97.50a
97.25
97.89-90.50a
97.89
89a
89
98a
98
View 6 Replies
View Related
May 7, 2013
I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
View 9 Replies
View Related
Jun 9, 2007
The Macro below will not combine numeric values Just Text. I get a Type Mismatch Error When I open It. I need for this macro to run with Numeric Values 1,2,3,etc.
View 2 Replies
View Related
Jan 8, 2007
I have a workbook with a lot of sheets. The names of these sheets are numbers ranging from 000001 to 999999, and are listed in column A in the Sheet TOTAL. Moreover these numbers (and the appropriate sheets) built 9 groups out of which every group has its own individual Tab color, also used in the A column of the TOTAL Sheet to differentiate between these groups. Now I want the following code to get data from each of the sheet belonging to a certain group and paste it to one of the 9 extra sheets (SH1, SH2, SH3... SH9) basing on the color of the sheet. The specified rng range is in the Sheet TOTAL (the names of all of the sheets are stored there).
Sub allinone()
Dim rng, c As Range
Set rng = Range([a2], [a2].End(xlDown))
For Each c In rng
If c.Interior.ColorIndex = 4 And c > 0 Then
Worksheets(c.Value).Range("a2:db2").Copy
Worksheets("SH1").Range("A65535").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _...................
View 2 Replies
View Related
May 20, 2014
I'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
View 1 Replies
View Related
Jan 5, 2005
My colleague has a problem where he needs to Extract numbers from alphanumberic strings. Here is the formula he is using:
=MID(B7,MATCH(TRUE,ISNUMBER(1*MID(B7,ROW($1:$297),1)),0),COUNT(1*MID(B7,ROW($1:$297),1)))
It works if alphabetic and numbers are clustered together such as scs987
It works if alphabetic and numbers are not clustered together such as scs987dtg
Problem: It does not work when numbers are not clustered together such as scs987dtg1234
View 8 Replies
View Related
Jul 4, 2014
Is it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
View 6 Replies
View Related
Oct 29, 2008
formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
View 5 Replies
View Related
Oct 23, 2009
I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
View 12 Replies
View Related
Nov 12, 2009
I'm currently trying to create a rota timesheet which automatically takes shift patterns and deducts for unpaid breaks.
Basically if a shift is less than 4.5 hours long then no break is deducted
If the shift length is 4.5 - 6.5 hours then 15 mins are deducted
If the shift is longer than 6.5 hours then 30 mins are deducted.
View 4 Replies
View Related
Nov 27, 2008
The problem I currently have is all numeric values only are not being recognized on my password column. I have tried changing the cell formats but still problem still there. The program work if an alphanumeric value is declared as password. However if you simply indicate plain numeric values only as password, it returns incorrect values, it like it doesn;t recognize all numeric values. Also how can I make 0000 as a declared password? when I place 0000 on my password column, only one zero value is being displayed instead of four another thing if I happen to place 0123 only 123 is being displayed.
View 4 Replies
View Related
Mar 5, 2009
who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies
View Related
Jan 1, 1970
I have created a calendar in Exel for individuals to put in their time at the bottom for everyday I have put in a total. Is there a formula that I can sum the dates, pick a certain time from those date and get my total hours for that particular week?
View 6 Replies
View Related
May 7, 2012
I have the following issue. I have a file, which contains about 7 000 columns, each with 8000 rows, mostly filled with numbers (with decimals). But sometimes, numbers will be replaced by "N/A" where a value was not available. What I want to do, is delete columns, where all the rows are just "N/A" to reduce the size my file.
View 2 Replies
View Related
Jun 6, 2014
I have cell E15 in Sheet1 which will take an 8 digit Personnel Number, which can have leading 0's. I want to prevent a user from entering any characters other than 0123456789. I have worked out that I need to use the Worksheet_Change event and I need to use the function IsNumeric.
No matter what I do I can't trigger the Worksheet_Change event!
View 4 Replies
View Related
Sep 17, 2007
I have cells with alphanumeric values. I need to extract the numeric values based on certain criteria and put these values in adjescent rows.
The sheet I am using has 3 rows . Row B contains data. Row C is Amount, Row D is Month, Row E is Action
To put values in Rows C, D and E , I need the data from row B in following criteria.
data in B row is as follows :-
RS 555/STMT DT 170807/BP12/TO PAY MEMBERSHIP FEE
RS.555/STMT 020907/BP12/ OFFER
ANNFEE RS 555/- / STMT 020907 / BP 12 / FIRST TIME
RS595/STMT 0807/BP12/ first time
MEM FEES RS 525 /STMT 120807 / BP12/1ST TIM
criteria for row C
if the cell contains "AMT" or "RS" or "INR" or "AMNT" or "RS."then extract the value till first "/" or "" and put it
under Amount row. ( E.g: "AMT 595 /" or "Inr 595/" or " Rs. 595")
criteria for row D
if the cell contains "stmt" or begins with "0" or endswith "07" then extract the value till first "/" or "" and put it under Month row.
criteria for row E
if the cell contains "BP" or "OP" then extarct the value till first "/" or "" and put it under department row. ( e.g " BP01 /" or "OP 02 ")
View 9 Replies
View Related
