I have 2 worksheets with thousands of rows. I need to lookup 2 columns (customer account # and number of occurrence) and then return a 3rd column (type of occurrence).
How do I do this? Normally I use sumproduct but in this case I need the result to be the text value for the type of call, not a count.
Here are two sheets:
Sheet1
systemip1 ip2 ip3 ip4 ip5 ip6
system11.1.1.11.1.1.21.1.1.31.1.1.41.1.1.51.1.1.6
system22.2.2.22.2.2.32.2.2.42.2.2.52.2.2.62.2.2.7
system33.3.3.13.3.3.23.3.3.33.3.3.43.3.3.53.3.3.6
Sheet2
ip system
1.1.1.3
2.2.2.3
3.3.3.6
3.3.3.1
Sheet 1 has 7 columns(system,ip1,ip2,ip3,ip4,ip5,ip6 and ip7)
Sheet 2 has 2 columns (ip,system)
I have to fill column "system" in sheet 2 with "system" listed in column 1 of Sheet1.
In other words look for "ip" in Sheet2 in 6 columns of Sheet1 and return column 1 of sheet1 as value.
I am trying to look in B1:B100 for the Cell that matches A1 and C1:C100 for the cell that matches A2 then return the value from D1:D100 that meets the 2 criteria.
View 6 Replies View RelatedI've been working this for ever and can't seem to figure out the best way to go about it. I have attached an example sheet. All I need to do is figure out the Dept #... which is listed in Row 1, Column F:H. I want to match the project numbers and then return the AA, BB, or CC in Column B.
View 9 Replies View RelatedI have a data range set up in a step chart formation. This means there is a "Name" to the left and a time line of "values" to the right in quarterly increments (3 months at a time). Row 1 has the first month of each quarter and should be used to find the start date. Row 2 has the last month of each quarter and should be used to find the end date.
I need to find the first value from left to right and return the date directly above it in row 1.
Then....
I need to find the last value in the step chart and return the date directly above it in row 2
Example
Start Date..A...B...C....D...E...F
End Date....U...V...W...X...Y...Z
Value-1...........5...2....7........
Value-1
Start Date: B
End Date: X
Duration: = B - X
The reason i need this information is to create a Gantt Chart.
I am trying to track a score. A master capacity sheet has two columns with identifiers (upstream and downstream nodes) relative to a pipe segment. I have a separate sheet (condition sheet) with the corresponding scores. I want to enter the upstream and downstream node numbers in 2 columns (A & B) in the master capacity sheet, and based on the the upstream and downstream node numbers, have the corresponding score (from the condition sheet) on that row copied in the master capacity sheet.
View 6 Replies View RelatedI'm trying to find a way to:
Use a referenced lookup value from sheet "A", to return values, from several columns in sheet "B"
Things to note:
a) The lookup values sometimes repeat. I need all the associated values with each repetition as well.
b) The lookup values in sheet "A" are a comprehensive list, sheet "B" also contains some of these values but not all. Essentially, what I need to do is find a way to lookup each value in an account numbers column in sheet "A", against a different account numbers column in sheet "B".
If that value occurs in sheet "B" I want it to return the values from Columns X, Y, Z, (I want these values returned in sheet "A".
If that value does not occur in sheet B, the corresponding cells should remain blank.
If the lookup value occurs multiple times, I need all the corresponding values from each of X, Y, Z columns.
How to return all possible values based on a single lookup ( or another condition / macro )
I have a table in B5:E100
In A1 I have a value
I need to look in B5:B100 for the value in A1 then place the contents of B:E for those cells in G5:J5 downwards
I have a database of customers that are all sorted by a customer number.
I have a form that has a number of fields that display customer info. When I use a blank of this form and put the customer number in it's correct field, all the other info fields do a vlookup on the customer number in the database file and return the info, such as phone numbers, name, address, etc.
Here's my question;
How can I check for a blank (using ISBLANK, I assume) to check to see if the customer number exists in our database and, if it's NOT blank, operate on it with the following example which is used to return their insurance expiration date.
=IF((VLOOKUP(B9,'[carrier list.xls]Sheet1'!$A$2:$P$1276,3,FALSE))<TODAY(),"EXPIRED",VLOOKUP(B9,'[carrier list.xls]Sheet1'!$A$2:$P$1276,3,FALSE))
I realize that this may be a sledgehammer approach and that Access is probably a better tool, but my company has not shelled out the $$ for Access...yet.
I have used the below formula which works in a standard cell, however I would like to have this is a VBA code using the Target.Offset option, however I can not get this to work. There may also be a better way of doing this.
The code is looking to see if the 1st cell (A118) is empty or not, if it is empty do nothing otherwise it then looks up the value in the 2nd cell (B118) and assigs the appropriate name from the range values.
VB:
=If(A118="","",LOOKUP(B118,{0,0;0,"";1,"Main Bank";71,"PFS";80,"Main Bank";106,"Dry Clean / Photo";112,"SCO";141,"Cafe";168,""}))
I have attached an example. I am wondering how I can get [K2] to return the value 501 based on the lookup.
View 7 Replies View RelatedI have an array in excel, 4 columns: Month, Day, Stock, Price. I dont know the most efficient way to handle arrays. I know i can loop through an entire array to find a specific value, but if i have a large array, this doesnt seem efficient.
For example, I would like to find the price in an Array (or Range), when i know the value of two columns. If this were in a database, I would write sql like this: " select Price from TABLE where month = 1 and Day = 3". The result would be 40.21. How can i do this with an array? I have attached a sample spreadsheet with the example mentioned above..
I have four columns, A through D
Column C is returning a simple vlookup of A
I need Column D to return a value where C is TDMA return TDMA or when C is GSM lookup column B compare to tab2 (columns A through L) returning column 12.
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
I'm looking for a formula (VBA I'm assuming) that will help me create a unique customer ID out of data that my website generates in order to import records into my accounting system.
I have a current list of customers in CSV format with the columns: CustomerID, CustomerName, CustomerZip
Each customer in our accounting system is assigned a unique,7 digit CustomerID in the format of XXX#### where XXX are the first 3 letters of their last name, and #### is a 4 digit number (with leading 0's) to create unique ID's for customer with the same first 3 characters of their last name. SAMPLE LIST:
SCH0001, Lindsey Schubert, 75230
SCH0002, Thomas Schoembs, 53132
ADA0001, Samantha Adams, 28205
...
What I'd like to do is pass the formula 3 parameters (Cust_First_Name, Cust_Last_Name, Zip) and have it parse the .CSV file and either return an existing customer's current ID or generate the appropriate new, unique ID, making sure in increase the 4 digit # accordingly and insert leading 0's if necessary.
Another caveat, if possible to work with, is the ability to also pass the formula another range of cells to append to the end of the .CSV file's data for comparison reasons. There are times when I'll bulk-import orders (or we receive numerous in the same batch) and the potential exists to have two customers that would have the same CustomerID created using JUST the .CSV data. Ie. If we use the example above and have new customers of Steve Schwab and Julie Schwitzer - we'd end up incorrectly assigning them both SCH0003, where if we'd read Steve Schwab's newly created info and customer ID of SCH0003, then Schwitzer would correctly be assigned SCH0004.
The logic of the formula like this....
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I need a vba code to return the value if two column's values are in sheet1 matching into sheet2,
Let us assume that, I have two sheets in a workbook(Sheet1 and Sheet2), In Sheet1, Col A and B are there some value and same like in Sheet2(Additionally Result in Col C)
I want to return the value in Col C of Sheet1(till A2 to last used rows) from Sheet2(Col C), if the first two column's values are matching with both sheets.
I have attached a sample workbook.
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedI would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
I am trying to hide/unhide columns based on what is return to cell C2 from this lookup (=VLOOKUP(B2,GM!E2:M129,9,FALSE)). It can only return 3,6 or 9
If it returns 3 I want to hide columns I:P
If it returns 12 I want to hide columns E:L
If it returns 6 I want to hide E:H and M:P
I have been trying to work with this code which I found on this forum but I haven't been able to get it working fully. It only works when C2 is entered rather than calculated and I can't get it working for the M:P part of the third option.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Changed As Range
Set Changed = Range("C2")
If Not Intersect(Target, Changed) Is Nothing Then
Range("A:Z").EntireColumn.Hidden = False
[Code]...
I would like to create a formula in a summary sheet ("sheet 2 section" in attached)that looks up and sum cells based on multiple criteria in row and columns in "sheet 1 section". I thought I sumifs would work, but I kept getting #value errors. I'm not a power user in excel. I attached the spreadsheet - it is only an example of what I want to do as the real data is confidential and large. The result I should I get is in section 2. Lookup account 12.251 for tim in the month of February - result is 14.
Test2014.xlsx
I'm having difficulty finding a way to ask excel to lookup a value based on an array spanning multiple rows and columns. There's a mock example in the attached.
View 2 Replies View RelatedI am trying to return a cell address range based on values in different columns. Attached is an example.
In Column A1 I have "Range" and below that a set of numbers from 1 to 31.
In Column B1 the name "Test" is used as an identifier, below that are the letters "a" though to "e". Once the letter "e" is reached the identifier "Test" is moved to column C "C6" and the alphabet continues from "f" down to "j". This process is repeated through the rest of the alphabet and the identifier moved to the next column after every 5th letter.
What I want to do is as follows:-
I would like to know the cell addresses of all instances of "test" from Column A numbers 6 throught to 24. The result should be C7:C12, D14:18 & D20:24. The results should ignore all instances of the identifier "test" and only return the cells which contain the letters of the alphabet.
I have tried using Vlookup which works well if the letters are all in the same column and I have incorporated the Address and Match formulas to return the range if all the alphabets are in the same column, but I do not know how to do this if the identifier "test" and letters move to a differnt column.
I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40
2222 13:00
Store 2 1111 15:05
3333 16:50
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
i'd like when i lookup abt specific in range (4 Columns is my lookup range)
get the results in one column with skipping blanks Cells "Note" Blanks cells it contains fromulas with "" so it blanks but have formulas ....
I have this vlookup formula and as you can see when I run it works good. The only problem is that I would like to have formula that it something is not found I don't get #N/A , but rather a 0 or blank.
=VLOOKUP(A6,GL!A$1:E$76,5,FALSE)
LOOKUPDIVDPTCC SALES 46120
010775010775 49,028,244.58
010200010200 3,373,145.76
010700010700 113,667.00
010300010300 14,382.54
011000011000 (1,518,076.05)
010600010600 589.98
011900011900 6,280.31
010900010900#N/A
011100011100 313.08
010750010750 570.90
Column A lists types of employees (managers, engineers, sales reps, etc.), each of which earns a seperate hourly rate. Column C lists hours worked, and Column D lists the total pay (Cx*Bx).
So column B is missing. Is there a way to generate the hourly rates in column B for each employee type in collumn A, i.e. if it's an Engineer, return $29, if it's a Technician, return $18, without an infinite set of True/Fasle conditions.
I have two files with the below data:
File A
Bob Jones
Williams, K.
File B
Jones, Bob
Williams, Ken
The only commonality between the two files is the last name. I can easily separate the last name off File B, since it is always 'last name, first name'. I want a lookup formula to use the last name from File B (after I separate it), lookup to File A, and if it finds a cell in a specified column that contains the same last name, return data from another column within File A.