In Excel, is there a way to consecutively number pages in different tabs?
I.E.... I have a Workbook with information in multiple tabs. I want to print all tabs, but I want the footer to display the page number in sequence. Sheet1 may have 3 pages to print. When Sheet2 prints, I want the page number to start with Page4.
In A1 of Sheet1, I'd like to display the number of pages Sheet2 will be when it prints out. I have no idea where to start.
View 2 Replies View RelatedIs it possible to display in a particular cell in excel worksheet the number of pages that a pdf file have?
I am planning to put the path where the pdf is located in cell B3 then in cell B5 will display the number of pages of the pdf file.
I have client sheets that need to be printed at the end of each month. Sometimes I need 1 sheet, sometimes more. I have a macro which pops up a userform in which I can select the client I want to print and the month. I would like to be able to have the macro determine how many pages need to be printed so I get all the pages and do not end up with any blank pages. Is this possible?
View 1 Replies View RelatedI would like to test for the number of pages that will be printed. Is there any way to do this with Excel VBA?
View 3 Replies View RelatedI have a macro that prints all documents that are found in a directory, i was thinking that it should be possible to modify this macro to count both number of documents as well as the pages that are printed, and display the count once the documents are sent for printing.
The Code:
Start of Code:
Sub ListDocNamesInFolder()
Dim sMyDir As String
Dim sDocName As String
sMyDir = "C:My Documents"
sDocName = Dir(sMyDir & "*.DOC")
[Code] .......
simple example.
A1 = 155
I need to print 3 pages where B1 is equal to 50 and 1 page where B1 is equal to 5. A1 may change, but B1 will always be multiples of 50, plus whatever is left over.
I need to have a macro or VB that prints a number of pages based on the value of a cell in the workbook.
Example:
A1 = 155
B1 would divide by 50, print 3 pages where B1 = 50 and then print the 4th page where B1 = 5.
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
[Code] .....
I've got an excel sheet that has a series of successive numbers down the side from 1-15 per sheet. I've done this by putting the cell formulas as previous row +1. (these are being used as unique reference numbers)
I want to be able to print this out multiple copies of this in one instance without having to manually adjust the first number multiple times then print the sheet. I also want it to be automatically saved as the most recent page printed, so that when it's printed the number continues on from the previously printed sheet.
I found a macro online which I have adjusted to increase a cell by 15 each time it is printed (to change the first number of the row). But I've realised that I'm printing the final page twice if I run the macro again. Is there any way to get round this? If I print 1 sheet there is also no adjustment in numbers.
I also haven't got onto the save part.
This is the macro I am currently using:
"Sub PrintSequence()
'
' PrintSequence Macro
' Macro recorded (altered) 8/16/2005 by Roy Wagner
[Code].....
I need a method or function that can count the TOTAL number of pages to that will be printed. I don't need anything with HPageBreaks or Get.document(50, ""sheet name"")") for these don't seem to work on my worksheet.
All they seem to do is give me a number lower then the number of pages that will be printed and they are dependent on where the active cell is.
Here is my code that does not work.
Code:
Agreement_Page_Count = ExecuteExcel4Macro("Get.document(50,""Signature Page"")")
and
Code:
Function HowManyPagesBreaks(sSheet As Worksheet)
Dim iHpBreaks As Integer, iVBreaks As Integer
Dim iTotPages As Integer
With sSheet
[Code] ........
Both codes return 2 when there are 3 pages that can be printed. Unless I pause the code select the cell at the bottom of my sheet (it ignores it if I use use a macro to select the bottom cell) and then continue my code.
I've tried it with and without the entirerow.hidden.
Is there a way of bypassing everything and using a marco to open up page preview and getting the total number of page to be printed? I'm using excel 2010
I was wondering if anyone knew the proper syntax for pasting values consecutively within a row.
PHP
Dim j As StringDim row As Integerj=0row = 0 (further down in code) j = j + 1row = row + 1 errorcount = errorcount + 1current.Sheets("Errors2").Range("1+j" & errorCount).Value = row
I want to take the average of cells D3:D8 from worksheet 1 and put that answer in cell D1 of worksheet 2. After that, I want to take the average of cells D9:D14 from worksheet 1 and put that answer in D2 of worksheet 2. Average of D15:D20 from worksheet 1 and put the answer in D3 of worksheet 2, etc. etc. etc.
View 3 Replies View RelatedI have a macro that each time I click it, takes a "Template" copies it, renames it to a new workable tab.
What im trying to add to this macro, is that each time this macro runs, to add the name of the newly created sheet to a separate tab (more or less summary page), such as if I click the tab 3 times, it will give me on a seperate page "1", "2", "3" in a column
I attached a spreadsheet with the sort of idea I wanted to accomplish.
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies View RelatedI have uploaded a sample sheet to illustrate what I am looking to do.
I want to pull out all instances where the four sheets of a 'book' are the same and appear in the same order. (column b is not really important) I have thousands of 'books' in the sheet so doing the task manually is not really an option.
B+N Total sheet is where the data is and the decider is Column 'AF' which is already formulated and has 2 options: 'MMS' or 'Retail'.
I'm trying to write a code which needs to do:
If B+N Total sheet's AF Column has 'MMS' then copy that row and paste it into ADI MMS consecutively.
Just like the example attached Row 2,3,5 is MMS and not row 4. So I'm trying to get those rows in periodical order as Row 2,3,4 into ADI MMS Sheet.
I've been using a script I found on the web to export a book of 15 worksheets so that they are saved into a folder as 15 separate .csv files - these are to then be imported into Adobe InDesign at a later date.
Currently, the code looks like this:
VB:
Sub SheetsToCSV() 'Jerry Beaucaire (1/25/2010)
'Save each sheet to an individual CSV file
Dim ws As Worksheet, OldDir As String
[Code]....
If possible, I would like the sheets to be exported as consecutively numbered files, so that they can be set into the order they are exported in Windows Explorer, rather than alphabetically.
E.g.
Sheet names = Overview, Checking, Testing
.csv export = overview-17.05.2013.csv, checking-17.05.2013.csv, testing-17.05.2013.csv
Goal = 1overview-17.05.2013.csv, 2checking-17.05.2013.csv, 3testing-17.05.2013.csv
I'm not too fussed about the final formatting, as long as the consecutive numbers can be inserted at the start of the string, the rest isn't as important.
My wife and I run an apartment complex with 2 employees, a manager and a maintenance man.
We use excel to produce a paystub for these employees twice a month.
There are a number of variables including incentives for renting apartments, overtime, variable hours in a pay period etc.
We have a separate spreadsheet for each employee and a separate sheet tab for each pay period named for the pay date... e.g. the first paystub had one sheet named "Jan 15"... the next pay period the paystub had 2 sheets: "Jan 31" and "Jan 15". The third paystub had 3 sheets and so on.
The paystubs have a column with the numbers for the pay period and then a column with the year to date sum (for straight pay, over time, federal withholding, social security, medicare, state withholding, etc.)
Right now I edit the formulas for all these sums for each payperiod. e.g. =sum('Feb 15':'Jan 15'!B35) for the third pay period is editted to =sum('Feb 28':'Jan 15'!B35) for the fourth pay period.
I would like to be able to just copy the prior spreadsheet and not have to find and replace values in 11 spreadsheet cells for each pay period.
I have figured out how to get the name of the current spreadsheet to appear in a cell on that sheet using VBA... but not how to get that cell content to be part of the arguments for =sum(. on the formula bar...
I'm trying to see if the same numbers exists in two different spreasheets on the same workbook. Both "asset tags" columns are sorted ascending. If the number appears on both table I would like my formula to add a "Y" (for yes) on the proper cell. Not sure if I should use Vlookup, sumproduct or sumif formula. Here is the main table where I want that "Y" to appear in Column D .....
View 9 Replies View RelatedI am interested in printing an entire workbook in one shot with multiple tabs, where each tab is one page. I would like to print the tabs such that the first tab has the number '1' in the footer, the second tab has '2' etc. And I don't want to go into each tab and type the number in the footer.
Does anyone know how to easily make this happen?
the maximum number of tabs/worksheets 1 workbook hold? I am using Excel 2003.
View 9 Replies View RelatedI work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
View 2 Replies View RelatedI have 7 tabs in a worksheet - 6 contain data and one is a summary page. I need to count the number of times "X" appears in cell C27 on each of the 6 data tabs and have it put the total number into cell C27 on the summary page.
I know how to do a "countif" for data all on one tab - but how do i add a non-numerical value across tabs???
I'm using Excel '03SP2 on Win 2000sp4. I believe I have a case where old tabs originally written in Excel ' 97 behave differently than new tabs in the same workbook, which is saved in 2003 format.
Specifically, the formula ="PLAN" & budyr-1 where budyr is a named range on a different tab containing 2008 . This formula yields PLAN 2007 on a new tab and #VALUE! on an old tab.
How do I get Excel to update the old tabs so that they behave as Excel 2003 tabs?
I have a website with lots of pages and I have a tool where I can see how many visits these pages get. What I want is to find out which pages didn't get any visits.
So I have in one column all the pages URL's on my site
In the other column I have all the pages URL's that have been visited, and in the column right next to it I have the amount of visits that page has received.
For example, this is what it looks like today:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/are.htm
row 2: /site/hello.htm
column C:
row 1: 10
row 2: 20
Ideally the URL's that have been visited should show up on the same row as the URL in column A, and then for the ones that have not been viewed it will just be blank in column B and C.
so in the above case it would look something like this:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/hello.htm
row 2: [blank]
row 3: /site/are.htm
row 4: [blank]
column C:
row 1: 20
row 2: [blank]
row 3: 10
row 4: [blank]
I am trying to create a PDF of every 2 Worksheets. I currently have this code that creates my PDFs for each individual sheet but I need it to group 2 together. Ex: Sheets 1 & 2 a separate PDF, Sheets 3 & 4 a separate PDF and so on.
[Code] ......