How To Create Excel Userform Display Automatically
Jun 26, 2013I have table in excel sheet and i want Create an Excel User Form display automatically to this table, how?
View 3 Replies
ADVERTISEMENT
Create Dynamic Msgbox That Display Data Updated On Checkbox Selections In Userform
May 29, 2013I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for:
- Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for:
- Carey
- Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _
If CAREY.Value =true then "- Carey" End if & vbnewline & _
If KEITH.Value =true then "- KEITH" End if & vbnewline & _
If JULIET.Value =true then "- Juliet" End if & ")
Userform To Automatically Create A Graph From The Data That Is Shown In The Worksheet
Jul 4, 2006I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
View 4 Replies View RelatedExcel 2010 :: Display Message Box When Automatically Updated Value Within Range Changes?
Aug 27, 2013I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
Create Search Engine In Excel To Display Item And Corresponding Characteristics?
Mar 19, 2013 how I can build a search engine. I have attached a file with an idea about how I would like it. What I would like to have is a sheet with a search button. If the correct number is putted in this file the corresponding data should appear in the same sheet. I do not know how to make this at all!!
This is just a small file but if i know how to build it, it would concern a much bigger file and maybe even some graphs (if that is possible)
Create Work Breakdown Structure (WBS) In Excel Automatically
May 25, 2014How to Create a Work Breakdown Structure (WBS) in Excel automatically with given data through macros.
In the attached excel sheet
work_breakdown_structure_.xls
Is there any way to do it for data automatically?
Excel 2007 :: Calculate 2 UserForm TextBoxes And Display Answer In The 3rd TextBox?
Jan 8, 2013I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
Excel 2010 :: How To Create Userform With Progress Bar
Feb 7, 2013I'm trying to create a userform with a progress bar. The progress bar does NOT need to be 'real' and accurate, but simply act as a timer to illustrate to the user that the program is running some quick calcs.. Again, basic progress bar, with about about a 4 second completion time..
(using excel 2010 VB)
How To Create Userform In Excel To Open Particular File Location
May 22, 2013I am working on a project where i am having 8 excel files saved at diffrent location so i want to create userform which will open particular file location and from that user can select the file which he want and then can go further. so i need a coding so that user will be prompt 8 times with file location. for eg. once user select particular file from location then again this code route him to select next file from file location. is it possible??
I tried using below code but in this code when i run userform file is not opening but when i run this code mannually by pressing F8 desired file is opening i dont know what is glitch in this ? another problem i am facing is not able to understand how to repeat this steps again to open another file using this code??
VB:
Private Sub Commandbutton1_Click()
Dim f As FileDialog
Set f = Application.FileDialog(msoFileDialogFilePicker)
With f
[Code]....
Automatically Display 2 Sheets When Opening A Workbook
Apr 9, 2008I am preparing a simple document for employees to use that requires viewing two sheets simultaneously.
To make it user friendly I would like, if possible, to save it so that when opening the file, the two sheets open side by side without the user having to open the new window and juggle with window sizes etc.
Automatically Display Each Cell In Range On Time
May 3, 2008if i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
How To Display Lat Row Value In UserForm
Dec 21, 2012In a sheet I am showing a calendar where a user can choose Day, Month, Year and if he/she presses enter the data is submitted in Sheet 3. This is working fine for me.
In this sheet ( Sheet3) I have the column headings as Day, Month, Year, Date and Submitted By.
Now in the user form I have a command button as Show data (User form Name CmdShow) and Text Box (User Form Name TxtDateLeave) . which I want is that when someone will click on Show data text box will show the data last row value of column D from sheet. Column D of sheet 3 may be Date or Text format.
I have written code for that
Private Sub CmdShow_Click()
With Thisworkbook.Worksheets("Sheet3")
Me.TxtDateLeave.text = .Cells(.UsedRange.Rows.Count, 4).Value
End with
end sub
But this is not working. is there any other way?
Display UserForm
Dec 15, 2006trying to incorporate userforms into my spreadsheets.
At the simplest level, I create a form and display it using userform1.show.
However, I've noticed from some tutorials that the " proper" way to do it is to create an instance of the form before trying to do anything with it i.e.
Dim frm As New userform1
frm.show
way to initialise a userform? Is there a pratical difference between the two syntaxs or in reality does it achieve the same goal?
Is there something special that I *should* do in the initialise event to allocate memory for the form?
Display Pdf In A Userform
Feb 17, 2007Is it possible to display a Pdf file on a Userform or in a textbox etc. on said form?
View 9 Replies View RelatedCreate A Formula Where Using Different Texts To Display A Value
Jan 11, 2010I would like to create a formula that allows the destination cell display a number depending on a word that is typed in the source cell. The source cell and the destinating cell will remain the same two cells.
example:A2=IF(A1="WORD1",1.5,0)
If i type WORD1 in A1 (source cell) then A2 (destination cell) will display 1.5, but how do i make this formula work for a multiple of different words.
example:A2=IF(A1="WORD1",1.5,0 IF(A1="WORD2",3.0,0 IF(A1="WORD3",2.5,0)))
this formula doesn't work, but is basically what i am looking for the formula to do - WORD1 displays 1.5, WORD2 displays 3.0, WORD3 displays 2.5 etc where the source cell and the destinating cell remain the same two cells, it is just the word and its value that change.
Display Data On Userform?
Jun 10, 2004Here to ask for a simple code on how can i display information on a user form once entered from an input box.
Example
A B C
1 E12858 Jorge Stregan
2 E112859 Rose Ann
Result:
Display all data in a row in userform once any data in A1 entered in input box.
Display Results From UserForm?
Apr 16, 2014I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
View 2 Replies View RelatedDisplay Image From URL In UserForm?
Mar 2, 2014I have a code that generates a URL for an image (on the internet, not on the local machine) and I would like that picture to be displayed within a userform (preferably at it's original resolution).
View 5 Replies View RelatedTo Display A Graph In A VB Userform
Dec 12, 2008I would like to have a graph to pulled on to a userform for display purpose.
I would like to hava a VBA macro to do this operation for a command click event.
Having Charts Display On Userform
Feb 24, 2009Currently, I have 3 charts which were created from data in the spreadsheet. I would like to have all 3 charts put on a userform for the users to view all at once. I would like this to appear once they click on the command button "View Capacity Charts" on the "Core Products" sheet.
I included in VBA a Userform1 with three Images, but I am not sure if that is the right way to go about....
Display A Progress Bar Using A The Userform
May 31, 2007The code I'm trying to execute is given below
Public Sub datafill()
Sheets("Bloomberg Data and Formula").Activate
' Creates prompt to input date to be checked
Dim InputAnswer As Date
InputAnswer = InputBox( _
prompt:="Enter NAV date for verification against Bloomberg in the format DD/MM/YYYY", _
Title:="Date Input Screen", _
Default:="DD/MM/YYY")
Range("C1").Value = InputAnswer
' Clear out previous day's data
Range("A6 : Z6").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("A6").Select
Display Data On Userform
Jun 12, 2007Private Sub UserForm_Initialize()
'ReviewFormlabel.Caption = "This is a Test" 'this line WILL display on the form
ReviewFormlabel.Caption = Sheets("Punches"). Range("A1:G17") 'I get a type mismatch error 13 here
End Sub
What I am trying to do is, display the worksheet data on a user form. This is for display only. The user will NOT be able to change any of the data.
Display Ticker On UserForm
Feb 29, 2008is there anyway to add a sport ticker to the bottom of a excel vb form? squills Auto Merged Post Until 24 Hrs Passes;i seen a really nice one by espn called bottomline. anyway to have that run in the vb form?
View 6 Replies View RelatedCreate Formula To Display Text With Date
Feb 16, 2007I have this formula =TEXT(inventory!I2,"mmm-yyyy") which takes the date from another spreadsheet, but anytime that the date is missing, it susbstitutes for Jan-1900. Is there any way to revise the formula to leave the missing dates blank in the cell? For example, if the date is missing on the other worksheet, in this case, the inventory worksheet, is there any way for a blank to appear, instead of the Jan-1900? Also, anyway for this formula to spell out the month, and not just the abbreviation?
View 2 Replies View RelatedDisplay Picture On Userform On Click
Dec 19, 2013I have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
[Code] .....
End sub
Display Data Using Label On Userform
Nov 27, 2008anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View RelatedDisplay Userform Based On Cell Value
Sep 12, 2012Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
Userform Search And Display Results?
Oct 17, 2012I've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
View 7 Replies View RelatedHow To Get Userform To Display Figure As Currency
Dec 30, 2012I am planning to use a userform to input various figures, and come up with a total.
How do I get the user form to display a figure as currency?
Also, how do I get the user form to display a figure as a date?
Display Format Of Userform TextBox
May 12, 2013A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000