Excel 2007 :: Calculate 2 UserForm TextBoxes And Display Answer In The 3rd TextBox?
Jan 8, 2013
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
View 9 Replies
ADVERTISEMENT
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
Nov 6, 2011
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click()
With frmConference
.txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0)
.txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0)
.txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0)
End With
End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
How can I change this number for the actual Date?
View 9 Replies
View Related
Apr 23, 2008
I have a userform with three textboxes.
1. txtStartDate
2. txtDateofBirth
3. txtAge
What I would like is for the txtAge box to be populated once dates have been entered into the other two textboxes.
It needs to be the person's age as calculated between the Date of Birth to the Start Date.
View 3 Replies
View Related
May 12, 2014
it is possible to join the values from two seperate text boxes into the same text box on the same userform?
View 1 Replies
View Related
May 10, 2014
I would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
View 14 Replies
View Related
Apr 17, 2014
Currently I am working on a data entry form for CRM database using Excel. Now i am stuck at filtering and displaying the data from the spread sheet to the user form.
There are three text boxes to key in the filter criteria and a button which will filter the data from the spreadsheet based on the criteria in the three text boxes. Then the whole row where the filtered data resides will be displayed on text boxes on the user form.
View 5 Replies
View Related
Aug 1, 2010
Essentially the user will enter their responses from a drop down list (assigned to about 30 textboxes in the userform: named txt1code, txt2code, txt3code....txt30code) and at the bottom of the userform the number of responses ('Yes') will be counted in real time and displayed in a textbox. (without using a command button)
For example:
The possible responses in the textboxes are 'Yes', 'No', 'Not Applicable', ''.
Yes = 1
I'd like the calculation to ignore No's, Not Applicables and ; however, count all the 'Yes' responses.
If there are 17 'Yes' responses, 10 'No', 2 'blanks', and 1 'NA' in the form, the Totals textbox will display '17'. As the user is entering information-"Yes" responses only (added or deleted), he or she can visually validate that the number of 'Yes' responses has changed.
Is a real-time calculation possible in a userform?
View 9 Replies
View Related
May 12, 2013
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
View 1 Replies
View Related
Oct 23, 2006
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
View 4 Replies
View Related
Jan 21, 2009
I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies
View Related
Jul 18, 2012
VBACode for Calendar to display in Userform textboxWhat code so I use in order to have a userform1 calendar linked to a worksheet cell and then have the worksheet cell data displayed in another userform2 textbox?
View 2 Replies
View Related
Jun 3, 2009
I am trying to calculate the result of two text boxes in a third textbox on a userform.
Box1 = DirectorHrs = a textbox that the user enters the number of hours
Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform.
Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.
I have the following code on the change event of Box1
Private Sub DirectorHrs_Change()
DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value))
End Sub
View 4 Replies
View Related
Aug 2, 2012
I have a worksheet that I will enter in an age and gender ($B$5 and $B$6 respectively). Based upon these two criteria, I would like to display text in column H(Lower Limit) and I(Upper Limit), showing the norms for their health metrics, a few are below:
Metrics
Measured
Lower Limit
Upper Limit
Total Cholesterol
200
120
200
HDL
40
35
80
Glucose
90
90
130
So, as the user enters in the age in B5 and the Gender in B6 the VBA or formula would populate the cells with the appropriate data. I can get it to work with 1 condition using vlookup. Was thinking VBA might be useful there with the two criteria, just not sure how to code it.
View 9 Replies
View Related
Jul 8, 2012
Excel 2007, Vista. When I step through the code and hover over "Type:= msoTextBox" the tip pointer indicates a value of 17 which is consistent with the mso shape type enum for a TextBox, but Excel produces a smiley face instead.
Code:
Sub TBoxAdd()
Dim sh As Shape
'next line returns a smiley face
Set sh = ActiveSheet.Shapes.AddShape(Type:=msoTextBox, Left:=100, Top:=100, Width:=100, Height:=100)
MsgBox sh.Name 'Returns "Smiley Face #"
End Sub
View 1 Replies
View Related
Apr 4, 2014
I want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
View 1 Replies
View Related
Oct 5, 2011
Excel 2007 Textbox changes LinkedCell Cell format to Text. If I do a VLOOKUP on that cell it fails and I have to "Convert to number".
My application is to enter a ZIPCODE into ZIP textbox, then for CITY and STATE to autofill using VLOOKUP in both CITY and STATE cells.
View 5 Replies
View Related
Feb 20, 2012
I'm using Excel 2007 and I am taking the contents of various user entered cells and creating drawing textboxes to display this data using VBA. How would I get VBA to resize the width of the textbox so that the text is displayed correctly in the textbox i.e. there will be variable lengths of text in the cells so I currenly can read the full contents?
View 4 Replies
View Related
Apr 28, 2013
I have a picture in my spreadsheet which slight tilted. I want to add a text box on to that shape and add some text but i want the text to be angled the same shape as my picture.
If I create and rotate my text box manually, the default rotation makes it rotate slight to much.
I was hoping if I could add a custom drawing of a text box so the text can be the same a picture.
View 1 Replies
View Related
Dec 9, 2011
I got a database that include a link for pictures stored in my drive.
I would like, to scroll trough the database entry and have the pictures resisze and displayed in a define region of my sheet.
How do I display a picture from a link?
How do I re-size so it fit in the region?
Working with Database
I'm using Excel 2007. I don't see anymore the form creation tool that I have used many many years ago.
View 2 Replies
View Related
Jan 26, 2012
I have a table of data which I am analysing in a Pivot Table. For the majority of the data, the Pivot works very well: however I have a small issue, but it subsequently means the Pivot is useless.
Within the table array that I am referring to, there is a column of data of "Days per employee for a given period". The rows of data within the table array relate to every absence entry per employee, but this final column of data always contains the same figure (although can differ from employee to employee).
When I put the data into the Pivot, I can summarise the absence(s) as a simple sum. However, this final column of data should not be summed, since it is already the sum figure.
This figure though needs to be part of the Pivot, since I need to report on the percentage of absence days per type over the given period. So, the simple representation of =absence day(s)/worked days does not work... well I cannot get it to work. Additionally I have tried features like % of, but nothing.
I am using excel 2007.
View 5 Replies
View Related
Nov 15, 2012
I have a text box within a chart tab which is populated with text values from a worksheet within the workbook. That part works fine however i want to be able to achieve the following example:
Current Text: Component Name - Notes
if there are notes against the component name i want the name to remain in black and the notes to change to blue
Aim: Component Name - Notes
If there arn't any notes then for the component name and the "-" to change to a light shade of grey
Aim: Component Name -
There are 26 components, each on their own lines in the textbox so im thinking either a loop where the cell reference is variable eg. ("CY" & i) or using the .find with a variable.
My code so far is:
Code:
Sub Chart_Notes_NTCA()
Dim i As Long, j As Long, Counted As Long, Total As Long
Dim Ans As String, Notes As String
Dim Cht As Chart
[Code].....
View 9 Replies
View Related
Oct 10, 2013
I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .
View 2 Replies
View Related
Jul 20, 2012
I want to calulate time by decimal the problem is anything after 1 am wont work
example start at 12:25 finsh at 1:45 time should show up as 1.33
using excel 2007
View 3 Replies
View Related
Jun 3, 2014
I am working on Excel 2010 and am still new at this
Attached is a UserForm with a Multipage
I have added TextBoxes to Page 1 to Page 3
Here is my problem
The Macro to show the form is not working.Also I need to populate TextBox1 with information on the "Data" sheet.
TextBox1 must show information in C3
TextBox2 must show information in C4, and
TextBox3 must show information in C2
I have tried some VB on the TextBox but it does not update, not sure if i need a command button.
View 4 Replies
View Related
Jun 4, 2013
I want to display icon sets in Excel 2007 (arrow) based on prior values. If value is less then previous cell then down arrow should be displayed else up arrow.
View 1 Replies
View Related
Feb 13, 2012
I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.
When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?
View 2 Replies
View Related
Mar 13, 2013
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
View 5 Replies
View Related
