How To Automatically Say Yes To Excel Message
May 8, 2012
I am running a consolidation macro that keeps getting tripped up on a message box from excel. It is erroring out each time this box would normally pop up. It is not displaying the box, nor do I want it to. I just want it to not error by maybe invisible being set to 'yes' for this.
The message is due to data validation that is pointing to named ranges.
Message:
A formula or sheet you want to move or copy contains 'ThisName', which already exists in the destination worksheet. Do you wish to use this version of the name?
View 6 Replies
ADVERTISEMENT
Aug 27, 2013
I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
View 9 Replies
View Related
Nov 23, 2009
I have a workbook that contains a macro that when executed creates a copy (duplicate) of one its sheets and places it in itself (the same workbook). The macro then prints the newly created sheet. After printing, the macro then erases the newly created sheet so that it is no longer a part of the workbook. My problem is that I get the Excel message "Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete". I would like add to my macro so that 1) the message is skipped or 2) the macro answers the message box (with Delete) so that no user input is required. I would like it if the user did not have to respond to this message.
View 2 Replies
View Related
May 2, 2012
I need a macro where user choose a value from validation, automatically lock the other cells and should show an error message.
Here is what I am looking for. User will choose Yes or no from cell H15 validation. If user choose "NO" from the validation then all other cells has to be locked in the workbook automatically except Cell H15 and a msg box needs to appear stating: "Select Yes from the validation".
View 3 Replies
View Related
May 9, 2013
My task here is to generate email automatically. When i enter x to run the sub findvalue macro.
Any cells on the column D that has the value of 10 should generate email with the message body, subject and email address automatically.
Example if there are 3 task that are 10 days to deadline, 3 email will be generated after entering "x"
I have edited the Sendmail sub to locate the email's body, subject line and email from the excel.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target = "x" Then
If Not Intersect(Target, Target.Worksheet.Range("G2")) Is Nothing Then
Call Findvalue
End If
End If
End Sub
Code:
Sub Findvalue()
Dim Rng1 As Range
Dim foundemail As Range
Dim a As Variant
Set Rng1 = Range("D2:D10")
For Each a In Rng1
If a.Value = 10 Then
Set foundemail = Sheets("Email").Range("A:A").Find(What:=Cells(Target.Row, 1), _
[Code] .......
View 4 Replies
View Related
Oct 18, 2013
I have an excel sheet that on the macro is saves and then sends a pdf via email. but outlook wants me to click to allow the application to send an email. Is there a way to bypass this?
View 6 Replies
View Related
Dec 13, 2013
I have a spreadsheet that monitors employees rest periods between shifts across a number of weeks I've started writing a very basic piece of code so if the employee has less than 12 hours rest, a message box will appear with a warning:
So far this is what I've done:
Sub RestHours()
If Range("I7") < #12:00:00 PM# Then
MsgBox "Candidate has had less than 12 hours rest since last shift worked. Please find another candidate to work this shift", vbOKOnly, "Unable to Use Candidate!"
Now this does work if I run the macro and then enter the data into cell I7, however I'm now stumped - How can I make it so that this message box pops up automatically when the data is entered into the cell without me have to go in and run the macro?
I also need the macro to run all the way down the I column (I7:I100) and across other columns which will eventually contain the same data i.e. M7:M100, Q7:Q100, all the way across to AT7:AT100?
View 9 Replies
View Related
May 17, 2004
I have a worksheet with 3 cells in it. One cell is "Total", the second cell is "Adjustment" and the third cell is "Variance".
How can I create a popup message that states "Adjustment is Below the Total" and show the variance in the Variance cell in the event that the Adjustment value is below the Total value ?
View 9 Replies
View Related
Apr 22, 2009
As an example, I have this code to open a message box saying "Hello" when Excel opens.
View 4 Replies
View Related
Mar 19, 2012
I am writing code in Excel VBA and trying to control power-point. at the end there is message-box pop up. Everything runs fine.
But at the end I have go bottom windows bar and click on the excel file then message box comes up, otherwise excel tag keeps blinking at the bottom. I want to add something to code so message box in excel file is pop-up automatically without me clicking on excel file.
View 1 Replies
View Related
Sep 16, 2013
We have an Office issues spreadsheet where our staff post questions/issues they have. These items are then allocated to a member of staff to look into and resolve. Each issue is entered on a seperate row on the spreadsheet, with the issue in column C, the allocated persons initials in column H, their e-mail address in column I (pulled in from a look-up table based on their initials), and the response required date in J.
I would like the spreadsheet to automatically send an e-mail when the issue is allocated to a person, or is re-allocated to someone else, ie when the 'allocated to' cell changes.
The e-mail message would only need to inform them that an issue on "column C text" in "filename" has been allocated to them and that a response is required by "column J date". We use Excel and Outlook 2003.
View 1 Replies
View Related
Dec 19, 2013
2007 Excel spreadsheet. My company currently shares ONE spreadsheet to generate new project numbers (Shown below). My issue is once a new number is assigned, it is supposed to be entered into our accounting software but that doesn't appear to be happening in some cases.
Is there a way that a pop up message can appear when column G is populated (Entered by)? Something like, "please be sure to enter this XYZ".
View 9 Replies
View Related
Jan 28, 2014
i have outlook message stored in my desktop. I want a macro to open that outlook message and update or change the subject name and boby of message. is it possible through macro.
View 2 Replies
View Related
Jun 12, 2014
I have this code below to send a workbook as an attachment to different recipients.
The macro finds the recipents by going through a list. The problem I am having is when it moves through the second loop and enters the line which is starred in the coding below.
Run-time error '-2147221238(8004010a)':
The Item has been moved or deleted.
Sub Mail_Workbook_1()
Dim OutApp As Object
Dim OutMail As Object
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[code].....
View 2 Replies
View Related
Jun 24, 2014
I want when Mold Capacity is more than available. i.e only Show warning Message to user
View 3 Replies
View Related
Oct 20, 2013
I'm using 2003 (I know!) version & I can't open excel files directly by clicking on them. I get an "error in sending command" message. I can circumvent problem by opening Excel & then opening the relevant file, but this sometimes causes me problems.
View 4 Replies
View Related
Mar 21, 2014
Below is some code that I found on the internet some while ago. When Excel opens this code runs which brings up a message box prompting a user to select an option. If no option is selected within 15 seconds then the macro runs, else it depends on the selection entered.
The problem that I am experiencing is that sometimes when the user does not select an option the macro does not execute after the coded 15 seconds. The message box just sticks around until a selection is made.
Most of the time it works just fine... some of the time it doesn't. The problem would appear to have gotten worse since upgrading to Excel 2010.
So, my question is either:
1. Why the code does not execute as expected each time Excel is opened?
2. Is there a better / more robust way of executing the below code without using "shell"?
[Code] ......
View 4 Replies
View Related
Sep 21, 2012
Creating a pop up message when a cell value is over 100%.
I have in cell T21 "=sum(t7:T21) but I'd like to give a pop up message when this cell value is over 100%.
Excel 2010
windows XP
View 2 Replies
View Related
Feb 1, 2013
Is it possible to have a cell when selected create an auto-generated email message to a recipient in column A with information taken from other columns inserted into the email. I understand it may be a bit vague at this moment, but I'm just wondering if this would be an alley to investigate further or not.
View 1 Replies
View Related
Jul 19, 2013
I am having trouble with copy-paste-from-outlook-to-excel routine. Is there a way where I can get a certain text (or numbers, perhaps) from an outlook email message and transfer it to an excel? It is fine to copy and paste one or a hundred emails, but it already exceeds 30 thousand email messages. I just wanted to know is there is a way for me to simplify my work through VBA.
Here is a sample of the email body:
"The lead with phone number 1231234567 is in the federal DNC list and has been rejected. We apologize for any inconvenience this may have caused. This email was automatically generated, please do not reply to it."
In this email body, i wanted to get only the number 1231234567 and paste it in the excel.
View 2 Replies
View Related
Dec 6, 2006
i was wondering if there is a way to display a pop up message that a stating that the spreadsheet is currently updating.
What i have is a macro running on Auto_Open when workbook is opened. I have switch off the screen updating. What i want now is for maybe to have a pop up stating the spreadsheet is updating. Setting screen updating to false means that my excel freezes for a few seconds. I think users might be thinking that excel has crashed and therefore would like to include the message that the spreadsheet is updating its information.
View 9 Replies
View Related
May 27, 2014
I am using Windows 7 and have a piece of code that brings up a warning message after 20 minutes to warn the user they have been in a workbook for too long.
If they have the Excel application window minimized, is there a way to get Excel to take the application out of minimized mode into max screen, before revealing the message.
Currently when the warning message activates, the excel icon just flashes in the start bar. Some users may not see this.
Here is the code I have so far:
[Code] ....
I have already tried simply adding a piece of code with maximize screen, however this doesn't seem to work.
View 2 Replies
View Related
Jan 9, 2012
Using Excel from Office 2007, and WinXP Pro OS
I have a spreadsheet which contains 2 drop down pick lists in Field1 and Field2.
Code:
FIELD1 | FIELD2 | FIELD3
--------------------------------------------
In Cell A2, I have this set in Data > Data Validation:
Allow: List
Source: =CatList
If the user selects a value from the CatList range, then the drop-down options in Field2 are updated accordingly.
In Cell B2, I have this set in Data > Data Validation:
Allow: List
Source: =INDIRECT(A2)
The Ranges are as follows:
Code:
Cat1 | Cat2 | Cat3
---------------------------------------------
Cheese | Hat | Square
Trees | Cat | Circle
Bees | Sat | Triangle
Knees | Mat | Rectangle
Apologies | Bat | Octagon
I'd really like to be able to add a message into FIELD3, which is based on the value in Cat2
e.g. using pseudocode, something like:
If Field2 value = "Apologies" then put this message in Field3: "This requires approval from A"
elseif Field2 value = "Triangle" then put this message in Field3: "This requires approval from XYZ"
elseif Feidl2 value = "Bat" then put this message in Field3: "This does not require approval"
Basically this is for an access form, and I need to be able to add a feedback message to field3 based on what's in Field2.
I thought about using the INDIRECT option to add messages but I can't see how I'd do it. Maybe VB would do it, but I don't know it well enough.
View 3 Replies
View Related
Jul 19, 2012
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code:
Sub mailer()
'
'
'
Dim Ash As Worksheet
Dim brng As Range
Dim OutApp As Object
Dim OutMail As Object
'Windows("Copy of FF RPL REPORT_JULY").Activate
[Code] .......
View 1 Replies
View Related
Nov 29, 2012
I did this 10 years ago so I admit I am rusty at this but here are what I had in my notes that worked with Excel XP. I am currently using Excel 2010
With ThisWorkbook
.HasRoutingSlip = True
With .RoutingSlip
[Code]....
The last line will send the workbook but I need a Subject and Message to go with it.
View 9 Replies
View Related
Mar 27, 2014
Warrantee.xlsx
I attached the sheet that I am trying to get up and running, there is two things I need to do, but cant get it working as I intend to.
Sheet 1 - When the invoice number is fulled in in cell F8 a message box must pop up requesting the hyperlink to the invoice saved on a share folder, but for now on the desktop, when the file is selected it (the hyperlink) must be returned to cell G8, then once the last cell (I8) has been completed, the line 8 must be locked so that it can't be editted again without a default password and a new line must be added below line 8 for processing, I tried recording the macro, but it only works on one line, and on the message box request, I truly am not up to speed yet, this I can't get up and running.
Excel 2010
View 2 Replies
View Related
Feb 24, 2014
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
View 2 Replies
View Related
Dec 20, 2012
I open a spreadsheet or workbook that has links to other workbooks I am notified by the message bar that content has been blocked. I click Options > Enable this content > OK. Even if I don't make any changes I'm prompted to save changes when I close the file. If I hit Yes or if I hit No, I will still be prompted to enable content in the message bar the next time I open the same file.
I have changed the External Content settings in the Trust Center to "Enable all data connections (not recommended)" and "Enable automatic update for all workbook links (not recommended)" but I still get the messages.
My Message Bar is set to "Show the message bar in all applications when content is blocked" because I read on Microsoft KB that the other option of "never show information about blocked content" will still block the content, just not tell you about it, which doesn't fix my issue.
The files I'm opening and the files linked to and from them are all on the same shared drive on a file server in the office. Is there a way to tell Office '07 that our file drive is a trusted source by default?
View 2 Replies
View Related
Mar 16, 2014
I've set up an email to be sent via a macro (excel 2007 and outlook) and I expanded the body of the message and it now comes up with an error "Compile error: invalid outside procedure"
It was working when I only had 4 lines and now it's not working.
strbody = "Hi," & vbNewLine &_
"abc." & vbNewLine &_
"def." & vbNewLine & vbNewLine & _
"ghi" & InputBox("Enter Response date (dd/mm/yyyy)") & vbNewLine & vbNewLine & _
"jlk." & vbNewLine & vbNewLine & _
"lmn" & vbNewLine & vbNewLine & _
"ABC" & vbNewLine & vbNewLine & _
"XYZ" & vbNewLine & _
[code]....
View 3 Replies
View Related
May 30, 2012
I am having with Excel 2007.
When I hover the mouse over a cell with comments, the status bar displays a message; for example "Cell A12 commented by A satisfied Microsoft Office user".
I only get this message for one column. The cells in all other columns give my first and second name as the author of the cell comment.
Why it is only effecting one column. I have been unable to change the annoying "commented by A satisfied Microsoft Office user" to my own name.
Is there a macro that can do this? I tried two macros I found online, both from a few years back, but neither of them worked.
View 2 Replies
View Related
