i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code: Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim MyText As String MyText = Environ("username") If Target.Cells.Column = 3 Then With Target If .Value "" Then .Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
As part of a program I'm writing in VBA (for Excel 2010), I have a textbox in a user form used as an interface to write a formula in cells in Excel.The resulting value of a formula from a cell is loaded up into the textbox. It would be shown in the textbox like "See 1.2 and 1.3" where the formula in the cell is
[Code].....
This is just used as an example but the principle is there. It is worth noting that I’m writing this for very inexperienced Excel users but I need them to be able to edit the string part of the formula without breaking the formula.
However where I’m struggling is to pick up a selection change event inside a text box already selected. I need to be able to check if the textbox.SelStart is within an address value or within the string in the textbox.
The event Enter won’t work if the user is already editing the textbox (i.e. typing stuff) and then clicking or using the keyboard arrow to move the cursor somewhere else inside the textbox. I don’t think the event Change is the solution either as it would mean that the user would have already typed something and as a result the formula may already be broken.
I have had a good look around and I didn’t find an event for a selection change inside a textbox. Does it exists and/or is there a way that would have the same result?
I have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
I have a button on say, sheet1 with text that I want to change after a certain action takes place; however, I was trying to change this text without switching sheets. (switching sheets isn't a big deal, I'm mainly trying to do it my way for the practice). I'm able to select the button on the other sheet without actually switching sheets, but when it comes to changing it's text I get an error. Here is the code I tried:
Sub macro1 () Worksheets("sheet2").Select Worksheets("sheet1").Shapes("Button 2").Select Selection.Characters.Text = "Done" End Sub
Problem with this is it gives cell A1 on sheet2 the "done" text. I also tried this...but it gives the error.
Sub macro1 () Worksheets("sheet2").Select Worksheets("sheet1").Shapes("Button 1").Select With Worksheets("sheet1").Shapes("Button 1") .Characters.Text = "Done" End With End Sub
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB: Sub RenameTab() 'Renames the worksheet tab ActiveWorkbook.Sheets("VSVA-1 Data").Select tabName = TextBox1 ActiveWorkbook.Sheets("VSVA Data").Select Selection.Name = tabName End Sub
I am having a hard time setting the MultiLine, Scrollbars and WordWrap properties through programmation. Actually what I want my code to do is to create a set of textboxes in my spreadsheet and then set the MultiLine, Scrollbars and WordWrap properties. Right now I can create the boxes and rename them but I'm unable to change the other properties.
When I type an 11 into my textbox (in my userform), I believe that the moment I type the first 1, the "event" kicks in. Is there anyway that I can have the change even "wait" until I am finished typing in all the digits of my number?
Code: Private Sub TextBox1_Change() Dim prime As Integer, divisor As Integer, currentcol As Integer Dim faccount As Integer, currentresidue As Long, currentfactor As Long Dim i As Integer, j As Integer prime = TextBox1.Value TextBox2.Value = prime - 1 'Write divisors across and phi of the divisors across at the bottom Spreadsheet1.Range("c2").Value = 1
I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change() TB1Refresh End Sub
Private Sub TB9_Change() TB1Refresh End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
I need to detect when changes are made to a TextBox (Manual changes). In VB 'TextChanged' fulfills that function but there is no equivalent in VBA.
I also need to differentiate between adding a value to a TextBox which has a vbnull value (Does not need to trigger event) and editing or replacing the current TextBox value (Trigger an event).
I have a userform created with 27 textboxes that corrispond to columns A through AA. What I am trying to do is when the form is loaded, I want to have all the textboxes populate with the information accross row 2. Using a scroll bar, I want the user to be able to scroll through the entries so that when the user scrolls down, all textboxes change to the information in row 3, 4, 5 etc.
Ultimatley, this is a data entry form, allowing the user to lookup and edit entries on the page. I can figure out how to do everything I need, witht he exception of the scrollbar.
Textbox background / text conditional colour change.
I have a textbox in an Excel form and wish the background and/or text font colour to be conditional i.e. if cell T45 > T41 then colour is yellow otherwise red.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
I am trying to edit a textbox caption in an active chart with a macro and cannot figure out the correct way to reference the text property. I have been successful in editing other items within this chart via the complete code below (i currently have textbox edit commented out)
[Code].....
I know i can set it up with a helper cell to have the textbox reference a range (that updates with the text i want) but i'd to try and edit the text without the use of helper cells to try and make this a little more break resistant.
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
A text box on a Userform inputs numbers to a cell in a worksheet. I want the number to appear in the text box formatted #,##0.00 However, if I include the line
in either the csDepositTextBox_Change or _AfterUpdate events, it causes the number to be stored as text in the worksheet. Curiously I can put the code in the corresponding event for another textbox and it does not corrupt the formatting.
I have created a form and the form contains one textbox that will support only one character, I'd like that character to be Green in colour, after 2 minutes I'd like that character to turn amber and if another two minutes go by then turn red and remain as such until a new character is typed in and start all over again.
