When I type an 11 into my textbox (in my userform), I believe that the moment I type the first 1, the "event" kicks in. Is there anyway that I can have the change even "wait" until I am finished typing in all the digits of my number?
Code:
Private Sub TextBox1_Change()
Dim prime As Integer, divisor As Integer, currentcol As Integer
Dim faccount As Integer, currentresidue As Long, currentfactor As Long
Dim i As Integer, j As Integer
prime = TextBox1.Value
TextBox2.Value = prime - 1
'Write divisors across and phi of the divisors across at the bottom
Spreadsheet1.Range("c2").Value = 1
I am building an excel folder with 200+ work sheets in it. there is a master sheet which i collect the rest of the data for the other sheets. My problem is, is that i want to be able to change the sheets quickly on the master sheet when i copy and paste or drag down. The formula that i am using in the cell on the master sheet is =SUMIF(sheet18!$B$4:$B$30,"rd1",sheet18!$E$4:$E$30)
Is there a way to quickly change the sheet from 18 to 19 to 20 and so on, or do i have to go into each formula and change it manual??
I have a Pivot Table with fields for months and weeks. I also have a "Show Values as % Difference Field" that shows monthly or weekly % change. When I collapse the fields so that it goes from weekly to monthly (or vice versa), I have to manually change each Show Values As % Difference column. Is there a way to do this automatically or quickly?
I am having a hard time setting the MultiLine, Scrollbars and WordWrap properties through programmation. Actually what I want my code to do is to create a set of textboxes in my spreadsheet and then set the MultiLine, Scrollbars and WordWrap properties. Right now I can create the boxes and rename them but I'm unable to change the other properties.
If I have a spreadsheet with 52 weeks or 365 days worth of data on it, is there a way (without using the hide function) to display dates of a certain range? For example, I only want to see the data from week 30 - week 40. Is there some kind of macro out there that I could maybe enter start date and end date in to a 2 cells (start date & finish date) and it will automatically filter it for me?
Any quick way of deleting all named ranges within a given workbook? I can loop over them, but it takes forever. (I've got about 20,000 names in total).
Turning the normal things off doesn't do much good either (e.g. auto-calculating, events, etc)
I have a single column with references on sheet 1, on sheet 2 I have a single named cell 'FormRef' which contents change (references). Active cell is in sheet one column A (column with references). If I use the FIND function dropdown and enter the '=FormRef ', Excel to quote "cannot find data".
Like a shortened version of vlookup I think. I want the active cell to go to the cell that has the contents of the single named cell in sheet 2
I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change() TB1Refresh End Sub
Private Sub TB9_Change() TB1Refresh End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
I need to detect when changes are made to a TextBox (Manual changes). In VB 'TextChanged' fulfills that function but there is no equivalent in VBA.
I also need to differentiate between adding a value to a TextBox which has a vbnull value (Does not need to trigger event) and editing or replacing the current TextBox value (Trigger an event).
I have a userform created with 27 textboxes that corrispond to columns A through AA. What I am trying to do is when the form is loaded, I want to have all the textboxes populate with the information accross row 2. Using a scroll bar, I want the user to be able to scroll through the entries so that when the user scrolls down, all textboxes change to the information in row 3, 4, 5 etc.
Ultimatley, this is a data entry form, allowing the user to lookup and edit entries on the page. I can figure out how to do everything I need, witht he exception of the scrollbar.
Textbox background / text conditional colour change.
I have a textbox in an Excel form and wish the background and/or text font colour to be conditional i.e. if cell T45 > T41 then colour is yellow otherwise red.
Is there a way to quickly format a cell so that it acts as though it is just a number and can still be used in a formula but also have a label? For instance I would like to be able to type in "10cm" and have the cell equal 10 and have it formatted to "General cm".
I realize that this is possible with the cell formatting menu, and can be applied to lots of cells at once, my question is can this be done somehow by just typing into the cell so that I can enter lots of cells that may have different labels without having to go into the cell format menu for each one.
I've built a simple inventory tracking system, and decided a reporting feature would be nice. There are four categories that are entered when inventory is removed...Date, Employee Name, Item Description, Location, and quantity.
Four my reporting purposes I'm only concerned with Date, Employee name and Item Description.
I've been able to write code that does what I want using a multiple Cases and a For loop once the case is identified. However, the more data there is the longer this takes...so I decided to stretch myself and try my hand at arrays (first time really working with arrays), but I'm having trouble figuring out exactly what I need to do.
Here is what I think the steps need to be.
1. Store my data (the categories above) which are located in the Check Out sheet 2. Go through the arrayed data to find exact matches based on my search criteria (here is where the Cases come in) 3. Pull out only that data and write the information to a "Report" Sheet 4. Export that sheet to PDF (this part I already have)
Below is a copy of what my current "working" code looks like (I should mention that the search selections are made from a userform this is what the Cases are deciphering between which ones are blank etc...), also most of my variables are instantiated as Public variables within a Public_Variables module also below.
I want to clear the range A10:IV65536 or all the cells containning numbers under the row A10.
Right now it takes for ever to clear it mannually because excel recalculates everything... i have over 100 000 data and id like to find a way to delete them quickly.
Is there a way to clear a range without excel recalculating everything???
If not the best way i think would be to clear the last columns first all the way to the first columns.
I am using Excel 2003 to run a workbook that contains 60 separate worksheets. To make it easier for the techs to navigate the workbook I created a block of 60 autoshapes, (5 blocks high x 12 blocks long) each block hyperlinked to each worksheet and labeled with the worksheet name. I then placed one of these blocks at the top of every worksheet. A tech can click on the block and it takes him right to the page he is looking for, pretty straight forward. It works very well, but as you can guess this is a lot of autoshapes to be stuck in one workbook (3600) and whenever you make major changes to the workbook than the blocks become a factor, and if you resize the columns or add one, or change a worksheet name... I thought about just creating 60 custom buttons and sticking them on a custom tool bar - but I found trying to create a button with a number on it like "34" (for "worksheet 34") was pretty tough in the button editor.
way to create a set of hyperlink buttons that will allow you to quickly navigate through 60 worksheets?
Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
I am trying to edit a textbox caption in an active chart with a macro and cannot figure out the correct way to reference the text property. I have been successful in editing other items within this chart via the complete code below (i currently have textbox edit commented out)
[Code].....
I know i can set it up with a helper cell to have the textbox reference a range (that updates with the text i want) but i'd to try and edit the text without the use of helper cells to try and make this a little more break resistant.
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
A text box on a Userform inputs numbers to a cell in a worksheet. I want the number to appear in the text box formatted #,##0.00 However, if I include the line
in either the csDepositTextBox_Change or _AfterUpdate events, it causes the number to be stored as text in the worksheet. Curiously I can put the code in the corresponding event for another textbox and it does not corrupt the formatting.
I have created a form and the form contains one textbox that will support only one character, I'd like that character to be Green in colour, after 2 minutes I'd like that character to turn amber and if another two minutes go by then turn red and remain as such until a new character is typed in and start all over again.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1" If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2" End If End If
I have formula that looks for information from another sheet (sheet name "ValidationLists")in Column A (list "billto") and returns all the occurances in my current worksheet (including the 10 columns next in the array). What it looks for is based on whatever value is currenty in Cell A2.
Basically I want to return everything that matches cell A2 of my current sheet from sheet list "billto" in a different sheet but I need the adjacent cells as well. So one cell below this would read the following (Just the Row Changes):
It is working exactly how I want it to. The problem is it is taking 2-3 minutes. I can just get a list of rows with the value in A2 from List "billto" very quickly but then how do I get the entire row to appear in my current sheet quickly?
I am interested in selecting cells in alternating rows as follows:
12 Red Happy 00 Unique descriptor 13 Grn Sad 03 Unique descriptor 14 Yel Happy 02 Unique descriptor
I am interested in selecting all the "12, 13, etc", "Red, Grn, ..." and "Happy, Sad..." for analysis, but want to skip all the rows containing the 0- numbers and the descriptors for them. How do I quickly select only the alternating cells in a column within a selection?
