Find Multiple Instances Of Single Criterion In Row & Return To A Single Col
May 8, 2006
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
View 14 Replies
ADVERTISEMENT
Feb 9, 2013
The problem - I'm trying to find a formula that will find text between 2 characters with unlimited instances in a single string and combine the found text to a single string. The character enclosing the text i'm after will likely be a % symbol. This formula would then be replicated down 5000-10000 rows.
eg. 1 - This is %an% example %sentence% to show what I %am% looking for
eg. 2 - This %is another% example of what I %need%
eg. 1 answer - ansentenceam
eg. 2 answer - is anotherneed
Ideally this would not use a macro as it will be applied to an ever expanding data set but I realize that may not be possible.
View 3 Replies
View Related
Jan 7, 2009
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
View 9 Replies
View Related
Dec 22, 2011
if color(white),pattern(6" tile),finish(gloss),width(>36") & height(>98")then return item ordering# different worksheet datadase.
WALL SELECTIONColor NamePatternFinishExisting
Wall Ht.Wall System stops at:
Wall Repair[SELECT COLOR][SELECT PATTERN][FINISH][SELECT HEIGHT][SELECT HEIGHT][REPAIR]Plum
Wall SpecsSoap Dish Wall SpecsBack Wall SpecsExtra
Wall Specs (if needed)Finished Size:[WIDTH]X[HEIGHT][WIDTH]X[HEIGHT][WIDTH]X[HEIGHT][WIDTH]X[HEIGHT]
Quanity:[QTY][QTY][QTY][QTY]Item Ordering #:
View 2 Replies
View Related
Jan 30, 2014
I think I need to link different formulas here and don't want to use a pivot table. The columns run to row 200 and I have 10 separate spreadsheets. I want to create a new file, a master consolidated view
Each row represents 1 client
Column A Contains Yes or No
Column B Contains the Source (i.e Post, Email, Phone)
Column C contains a range of different dates ie when customer made contact
Column D Contains a currency value.
So the question I need to answer is; Return a sum of Column D for those values who's row attributes are Yes, Post and date of current day +5.
In simple terms who can I contact in 5 days time and what is the expected value.
I have added current date in cell E1. F1, F2, F3, contains text Post, Email, Phone.
View 4 Replies
View Related
Nov 4, 2009
I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup
For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...
View 9 Replies
View Related
Feb 19, 2014
I am trying to write a function that will give me the amount of time a certain number shows up in the same digit place in a large set of numbers.
For example:
111112221233313
111212222233323
111312223233333
111412224233343
111512225233353
111612226233363
111712227233373
111812228233383
111912229233393
given the number set how many times does the number 5 show up in the 4th digit. I know its 3 but for the data size I need to run it on, it is impossible to count.
What function would count how many times a certain number shows up in the same spot?
View 8 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
May 30, 2006
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies
View Related
Feb 20, 2007
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies
View Related
Nov 28, 2012
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
View 4 Replies
View Related
Aug 26, 2006
I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?
In plain English, I'm looking for something like
If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")
Obviously this is a very crude example
View 3 Replies
View Related
Sep 29, 2007
I have a macro which scans column "AV" in Sheet1 and if a particular value is found it will copy certain cells from that row and paste them into Sheet2 on Row 10 starting with column "E".
With the current code I only paste a single instance, if the value is found more than once I only have the last one pasted. How can I best set this up so it will paste ALL found value results within Row 10?
The four copied results do not have to be in separate cells, it is actually best if the cells are combined. On Sheet2, cells E10-H10 can also be setup to have the data pasted across all four cells and that way Row Height AutoFit would take care of expanding the row's height to accommodate the possibly of having four or five sets of results being combined together and pasted into E10.
Rather than the typical result appearing as:
[TABLE]______E___F___G___H
10__1223 122 2222 2222
11__343 565 4554 5990
12__9755 334 6787 6788[/TABLE]
It is better for me if the data appears like this:
[TABLE]_____E____F____G____H
____1223 122 2222 2222, 343
10__565 4554 5990, 9755 334
____6787 6788
[/TABLE]
Is this even possible using a macro? It is currently being done using a Word document but I am wanting to automate the process and try to handle all the data sorting within Excel, if possible.
Sub Number()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
With Sheets("Sheet1")
View 9 Replies
View Related
Mar 17, 2014
code to find/replace the letters: "A" with "Active", "P" with "Contract", and "C" with "Settled sale", all in column "Q".
View 2 Replies
View Related
Mar 21, 2008
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies
View Related
Jul 11, 2012
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies
View Related
May 12, 2014
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
View 4 Replies
View Related
Apr 6, 2008
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
View 10 Replies
View Related
Jan 31, 2013
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
View 2 Replies
View Related
Dec 31, 2007
I am looking for a formula that will return the cell numbers of multiple instances of the item found using VLOOKUP. For example if I am looking for
"A123", this may occur in more than one cell in the search range. I want to be able to return all the cell reference numbers of that instance.
View 9 Replies
View Related
May 11, 2012
What macro would convert this:
Excel 2007AB112234Sheet2
To this:
Excel 2007A51627384Sheet2
I need a macro please that works with a table of any size.
View 6 Replies
View Related
Apr 29, 2008
Assume A1:A10 filled with the characters A to J.
I'm looking for a way to return the letter "C" when 3 serves as the index_num BUT I do not want to present all 10 characters in the formula.
I would like to use the range A1:A10 =Choose(3,A1:A10) or, if applicable, to name the range as DATA and then use: =Choose(3,DATA)
I tried all I know, including INDIRECT - but found no solution [is there any ?]
As I'm familiar with all workarounds - I will appreciate replies that use CHOOSE.
View 9 Replies
View Related
Jun 23, 2009
Sheet 1 has one column
Customer Number (unique)
e.g.
111
222
333
444
Sheet 2 has two columns
Customer Number
Email Address
e.g.
111-----billgates@msn.com
111-----billgates@microsoft.com
111-----billgates@hotmail.com
222-----davidbeckham@mufc.co.uk
222-----davidbeckham@fa.co.uk
333-----me@test.com
444-----you@test.com
Now, when I do a vlookup on sheet one to obtain all email addresses for customer 111, it only returns the first email address - e.g. billgates@msn.com
Ideally, I would like;
Is there a function that can achieve this?
If not, can the multiple occurrences be returned in one cell, separated by;?
View 9 Replies
View Related
May 18, 2007
I have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0
Next I
View 9 Replies
View Related
Jan 3, 2008
I am trying to write a function that returns a single dimension array from inputed data. I want this to work for any data, i.e. a single cell, an array in vba or a range. I am using the "for each" staement. However, when I pass an array in the "for each" returns the same range, rather than the elements of the range. I've played around a bit, and the "for each" does what I want on an range if I am not passing the range to a function. Is it because I am passing the range into a function as a variant? Here is the code for the function.
Public Function CreateSingleDimensionArray(ByVal dataToConvert) As Variant
Dim vHolder As Variant
Dim vArray As Variant
Dim lElementCount As Long
lElementCount = 0
For Each vHolder In dataToConvert
lElementCount = lElementCount + 1
Redim vArray(1 To lElementCount)
vArray(lElementCount) = vHolder
Next vHolder
CreateSingleDimensionArray = vArray
End Function
View 4 Replies
View Related
Nov 26, 2008
The database is for a Prison, and an obvious item to search for on a userform is Prison number. I have a serach option that generates an array listing in a listbox, selecting that item then populates the userform - no problem.
The problem occurs when an individual has more than once instance that has been recorded, is it possible to have more than one row generated in a listbox that can be selected, I only want indiviudal rows selected. The coding I am using for one of the single instance listbox is etc etc etc has been used to demonstrate that the coding continues to the length of the array requied
Private Sub FindAll()
Dim FirstAddress As String
Dim strFind As String 'what to find
Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, 'etc etc etc' As String
Dim i As Integer
i = 1
Set rSearch = Sheet1.Range("ChargeNo.")
strFind = Me.CbAdjFind.Value 'find Charge No
With rSearch
Set c = .Find(strFind, LookIn:=xlValues)..............
View 4 Replies
View Related
Apr 28, 2009
I have four different sheets with email addresses in an excel file. There are some email addresses which are present in more than one sheet. I wanted to find these email addresses and remove its multiple instances.
I can't use the simplified version of vlookup, as I can't enter each email address to see if there is another instance.
Is there a way where the excel sheet can search within itself for duplicate values and if not delete/at least point them out, so that I can delete them manually?
View 3 Replies
View Related
Dec 2, 2009
Here's my problem:
A) This is regarding a real estate transaction.
B) Assume the funds to acquire the investment total $60,000.
C) Assume the purchase date is 1/1/10.
D) Assume the sales price (including costs) would total $76,000.
E) Assume the sales closing date is 4/1/10.
F) What formula function would allow me to show the Annualized Rate of Return on this transaction?
I Know this is something I should have been able to figure out -- but when I use the XIRR function, I end up with a figure of 167% -- and common sense indicates that's just not correct....?
What I need to do is just find a way to show either the IRR or the Annualized Rate of Return for investment consideration purposes. Is it possible to do this based on one single transaction that occurs in a fraction of a year?
View 9 Replies
View Related
Jul 13, 2009
I tried to write a script that does following:
I have data that looks like this:
1
1
2
2
3
3
4
5
5
6
6
As you can see, mostly every two rows contain same values. But there are some values (here it is 4) that is a "single row".
I want to find every "single row" and delete them. I tried a long time but reached frustration now.
View 9 Replies
View Related
