if I have a range, say 33-35, I want to put a value into a cell and compare it to that range. It will set another cell to a certain value, based on the range.
i.e. if (35 > A1 > 33)
A2 = B
elseif (37 > A1 > 35)
A2 = X
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
Here is what I want to do:
If AND(NOT(ISBLANK(A1);A10) then B1= "NOT OK"
else
If AND(NOT(ISBLANK(A1);A1=0) then B1="OK"
End if
How to do this for a range A1:A10 in vba??
I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I have two worksheets.
Column A on both sheets have an ID number which is unique to clients. Sheet one will only have a client ID once but sheet two may have the same ID multiple times
I need to compare both sheets Column A and if it finds a match, then paste the cell value on column E sheet two, into column K on sheet 1.
sheet 1:
A ..........................................K
Client ID............................. name
Sheet 2:
A ...........................................E
Client ID............................. name
I have attached a workbook stating my problem.
file1.xlsx‎
how can i compare a range, which may contain multiple cells of the same information ie 1s and 0s with a separate cell, if they match, return a message box?
View 9 Replies View Relatedhow to Determine two uncontinnuous ranges are same? "Address" can not work here.
Sub Macro1()
Set Rng1 = Range("H1:H10,C1:C10,F1:F10")
Set Rng2 = Range("F1:F10,C1:C10,H1:H10")
Debug.Print Rng1.Address
Debug.Print Rng2.Address
If Rng1.Address = Rng2.Address Then
Debug.Print "yes"
Else
Debug.Print "no"
End If
End Sub
I am relatively new to VBA macros. I am having two sheets, in one sheet I have a non-contiguous 20 rows range and in the other sheet I have a 20 row contiguous range. I need a macro which will compare data between the two ranges(one to one compare) meaning 1st row of the first range should compare with 1st row of the second range and if it matches then it should populate the adjacent column in the second sheet with true or false accordingly.
View 2 Replies View Relatedi have an excel sheet with two columns, and depending on the status of the equipment, i need to compare the two columns and if the data is the same, fine, otherwise i need to display a msg box with an error. the columns have formulas in them, and i assigned a name to the cells i want to check, i keep getting errors with the following code, when the colums are the same, it is still displaying the msg box with the error. what am i doing wrong?
For Each Row In Range("Dev_Found") 'Loop through each row in Column C
If Row.Value ActiveWorkbook.Names.Item("Dev_Left").Value Then
blah = MsgBox("Your % Dev for after does not match % Dev before, please correct on form!", vbOKOnly, "Error")
Exit For
End If
Next Row
I am trying to compare two sets of data in two different columns. But I only want an approximate match. That is: Data from one given cell, has to be matched to another given cell and if an APPROXIMATE match is found, return a 1, otherwise a 0. And that should happen all the way down in the two columns.
View 2 Replies View Relatedfor example i have two work books where i need to compare the times, such as i need to see where does 10:26 am lies and after comparing it on workbook2 we need to return the data in a,b,c blocks infornt of 10:26am, i have tried IF(AND()) but i was not able to rationalise it for huge and random data.
Workbook1:
7/13/2013 10:26
7/13/2013 10:58
7/13/2013 12:06
7/13/2013 12:17
7/13/2013 12:29
7/13/2013 12:29
7/13/2013 12:37
7/13/2013 13:21
7/13/2013 14:24
Workbook2:
9:58:27abcassigned
11:45:09abcreleased
11:49:00ghiassigned
15:14:40ghireleased
15:25:57mnoassigned
Outout should be:
7/13/2013 10:26 a bc
7/13/2013 10:58 a bc
7/13/2013 12:06g hi
7/13/2013 12:17g hi
7/13/2013 12:29g hi
7/13/2013 12:29g h i
7/13/2013 12:37ghi
7/13/2013 13:21ghi
7/13/2013 14:24ghi
I have 2 ranges named MASTER and SUBSET and 1 range named ANSWER. I want to compare ranges MASTER and SUBSET and copy the difference to ANSWER. The ranges have the same number of columns but different number of rows. Sample data is below.
Ideally, I would like a VBA solution executed from a userform button.
Example:
MASTER
aaa apple
aab banana
aac grape
SUBSET
aab banana
ANSWER
aaa apple
aac grape
I wrote a macro that will compare a cell with another cell (top cell color yellow compare wit the white cell value). If the cells matches color green will be assigned if not red color will be assigned. I have one problem with which I can't figure out is that if the top cell in yellow has two or three values such as (5780, 1975 or -116,-110,-108) and the camparing value has only one value (5780 or 1975 etc...).
View 2 Replies View RelatedI have one wk with 12500 rows and 6 columns and another row with 13500 rows and 6 columns.
I want to compare wk1 to wk2 cell by cell and copy unique data into wk2 from wk2.
I have two spreadsheets in different workbooks ( workbook 1: sheet 1 and workbook2: sheet1), here i need to compare column 5 in Book1 and Column 5 for all cells, say X is the value we are looking for..
X occurs once in book1 and might occur more than once in book2..so if a match occurs ( that is once the code checks that there is X occuring in both books in columns 5) it should copy all rows in book 2 where X occurs to a new workbook 3 in sheet 1 and also it shoud copy entire row data where X occurs in book 1 sheet 1 . But this data from book 1 has to be copied at the end of row after the data from book 2 has been copied.
if X occurs 4 times in book 2 , then 4 rows have to be copied in book 3 and then data from Book 1 where X occurs only once is copied 4 times at the end of the data from book 2.
this process has to repeated for all cells in columns 5 in book1 and column 5 in book2 .
Sub Find_Matches()
Dim M, N As Range, x As Variant, y As Variant
Dim NewRange As Range
‘ To get the book1 location
MsgBox " Selec the Location of N File"
Application.Dialogs(xlDialogOpen).Show arg1:=""
ActiveWorkbook.Activate
Windows("N.xls").Activate
Sheets("sheetA").Select .......................
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedAs per title, I am trying to compare a column of text cells which contain "Yes" or are empty and a columns of numbers. If they are "Yes" and "1" on the same row, I want to output an "OK" message. Excel seems happy with the following code but it does not work and returns an empty cell if the two conditions are true.
[Code] .....
I'm trying to create a Formula where the User has to select 2 Ranges and then a calculation is done for each corresponding cell.
I thought about using arrays or ranges but I'm quite lost.
[Code] ....
My Second approach would be to use Arrays
[Code] .....
This is what I thought about so far but it does not work. I guess because I have to Idea how to tell VBA to use the Interestrates Range for each corresponding cell.
I'd like to compare two cells, and if the first cell is either >150, <161, OR =165 AND the second cell is ="E" to output a 1, and if false, output a zero.
I have =IF(AND(AND(Sheet1!B3>150, Sheet1!B3<161, Sheet1!B3=165 ),Sheet1!E2="P"),"1","0")
But i know that is incorrect because Sheet1!B3 can not be greater than 150 AND less than 161 AND = 165. I can't figure out how to make it >150 AND < 161 OR = 161.
I have a report that contains 76 columns and any number of rows. I have seen between 100 and 23,500 rows. The data in each cell of each column must contain a precise number of characters. What I am trying to do is create a macro that will LEN() each cell and compare the value to row 1 of the cell's column. Row 1 contains the value of the required number of characters, row 2 contains headers and the data starts on row 3.
This is what I have so far:
Sub LENtorow1()
Dim cel As Range
Dim row As Integer
[Code] .....
It is this portion that is causing me troubles: Range(cel(ActiveCell.Column & row)). If I use a static value it works fine but when I try to make it recognize the first row of the current cell's column there is a break down. I have tried several variations, the one listed here is my latest attempt.
I am wondering if you can write me a VBA code for comparing the value inside a cell.
Code:
For i = 1 To 159
If Sheets("sheet1").Cells(i, 1).Value = Sheets("sheet2").Cells(i, 1) then
..............
Else
[Code]....
I have a spreadsheet and everyday it would change in length.
But I would like a macro that compares the value of each cell in column B against the value in corresponding cell in column D then moves to the next roll - so eg B2 against D2,B3 against D3......B50 against D50 until all rows are compared.
And when it finds a different makes the background colours go red !
I have a bit of a code but I think I need to loop to compare all populated cells !
I have data all in one column that I need to compare.It's basically the data between the 2nd and 3rd commas being compared to the data after the 2nd colon. I have over 860,000 entries in the database that this data is extracted from so I can't go through it one-by-one.
12EDM1,1,1638413100250,Match_Location_Number:1:1638413100250
VIK1,1,1638413100251,Match_Location_Number:1:1638413100251
WHI1,1,1638413100252,Match_Location_Number:1:1638413100252
HPR1,1,1638413100253,Match_Location_Number:1:1638413100253
I have a column of dates formated DD/MM/YYYY in column H in one sheet. I need a formula that if a cell in H is more less than 30 days from today's date to display the value from an adjacent cell.
example:
Data source table *Serial #ID #TempExp date9384-63838QDYHEISAV4
YES01/18/201010384-78618PDQA7O7FUO
yes11/18/200911384-78708QKM5XA12BK
yes12/25/2009 Excel tables to the web >> Excel Jeanie HTML 4
I need a formula that will, if the exp date is less than 30 days from today, place the serial # in a cell on a different sheet.
I am trying to create VBA function that will compare search a worksheet row by row for a value in column c. If column c matches any of the array values, i would like the cell value from column d to be entered in another array. I'm familiar with adding values to an array, but i'm having trouble with the code to compare the values. the array is a string and the cell values are text.
View 3 Replies View Related