Copy "SheetA", and you get "Sheet A (2)". But i want all of the formulas in second, just copied, sheet to reference first one. So what in "SheetA" was =W1 in "Sheet A (2)" should be =SheetA!W1. Is this posible?
If not, is there any easy way to add a prefix to selected range of formulas. I tried Find/Replace, but it ignores the formula and i end up with just a plane piece of text.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies View RelatedEXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI'm having some trouble coding a macro that copies data from one sheet in a workbook to the next sheet in the workbook, and the problem seems to stem from my lack of knowledge about how VBA refers to sheets. What I'd like to do is copy data from a range of cells in the next-to-the-last sheet in a workbook to the same range in the last sheet in the workbook.
Each day, I add a blank sheet to the end of all the sheets in my workbook. I insert some data into it, then go to the previous sheet, copy some data, return to today's sheet (the one I just added) and paste the data. I can record a macro that will do this perfectly, but it only works for the two sheets in which I record the macro. I need a way to change the sheet references so it always copies from the next-to-last sheet to the last sheet.
I'm currently working on a summary page for the defects in the building we are working on.
I've done up a summary page which reference's cells in other sheets which contain a TEXT(COUNT formula. When I goto SUM these referenced cells in my summary page I keep getting it returning '0'.
Example of what I'm doing:-
Defects Column in Summary Page
411 --> referenced from =Basements!L1 --> L1 contains =TEXT(COUNT($C$8:$C$100),"0") formula
56 --> referenced from =Level1!L1 --> L1 contains =TEXT(COUNT($C$8:$C$100),"0") formula
33 --> referenced from =Level2!L1 --> L1 contains =TEXT(COUNT($C$8:$C$100),"0") formula
When I go to do a simple SUM of 411,56,33 via =SUM(D3:D5) it returns a zero?
Could someone show me an alternate way of using/writing this code instead of using RC references to the Sheet1. I am trying to select ranges that dynamically change according to the range of data in the next column. This is the code I have but it is static in the range it chooses.
=LINEST(Sheet1!RC[1]:R[61]C[1],Sheet1!RC:R[61]C^{1,2,3,4,5,6})
Any way to always include the sheet name before the cell address in a formula? For example, in my "Summary" sheet, I have a formula:
Code:
=A2 + B4/B5
However, without typing anything else, I'd like the formula to populate the sheet name since I will be extracting the formula as text and need the full reference:
Code:
=Summary!A2 + Summary!B4/Summary!B5
A way to get around this is to enter the equal sign, then temporarily select another sheet, then go back to the "Summary" sheet where all cell references will include the sheet name, but if there is a quicker way to do it using some kind of property or event in VBA, that would be ideal.
Is it possible to update values within a second workbook without opening that workbook?
Also, is it possible to use INDIRECT to reference another workbook?
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies View RelatedIn a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1,
2-a new tab is made (a carbon copy of the hidden sheet "Template")
3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.Name = Range("F1").Value
End Sub
Function WorksheetExists(SheetName As String, _
Optional WhichBook As Workbook) As Boolean
Dim WB As Workbook
Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook)
On Error Resume Next
WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0)
End Function..................
I have inherited a monstrous speadsheet on which all data appears on a single sheet rather than being broken up across several sheets in some logical fashion.
One portion of this monster is a set of quite a few form letters, each of which reference various cells elsewhere in the spreadsheet.
I want to move all of these letters, together, to another tabbed sheet as a first step in reorganizing the monster.
Simply copying and pasting the cells or columns doesn't work. It fails in different ways depending on which pasting options I employ.
A very simplified version of my problem appears on the 5 sheets of the attached file, with what I hope is just enough further detail about the difficulty.
By the way, I also tried using the "Insert Copied Cells" option when pasting but since this failed with the exact same results as one of the other options I didn't include the results in the example shreadsheet.
Within one workbook I have 15 sheets, 13 are for separate divisions within the company, 2 are used to present sums across the 13 sheets. All 13 sheets have identical columns and rows, with unique numbers in each cell. Right now I am manually selecting the cells to reference in my master sheet, =sheet name!cell+sheetname!cell+sheetname!cell - so and and so on. How can I reference the sheet name once, and then all of the cells to SUM? =sheetname!(c4+c14+c24+c34) etc?
This would let me be able to copy the formula from cell to cell, and only have to change the sheet name each time.
I am very comfortable with using sumif statements although I have tried it link two data from 2 different sheets and I keep getting returned #VALUE!
I get a message "Unable To Read File" in a pop up box before fully opening.
I have formulas in wksheet #1 going down 20 columns (they are all the same formulas). On wksheet #2, I need to understand how to switch all column references in only one column to another (from wksheet #1) to show different sums. Clear as mud? The way I want to do this is by having one cell on wksheet #2 where I change a number from 1 to 20. This in essence would be the column heading in wksheet #1.
Example:
*There are more formulas but for the purpose here I'll use 3 for each Wksheet
In wksheet #1 I have
C24 is =SUM(C14*C15,C16*C17,C18*C19,C20*C21,C22*C23)*12
C55 is =IF(B66=0,"",C7/B66)
C56 is =IF(C11=0,"",C7/C11)
In wksheet #2 I have .......................................
I would like to know whether its possible to fix a sheet to always be the second sheet in a work book no matter how many other sheets are added. Currently I have set up macros to add subsequent sheets before the last sheet, so that Sheets("Number 2") remain sheets(2). Is there some way I can lock the first two sheets so that when I reference them in my code as sheets(1) and sheets(2) it will reference the right sheets. Right now I have it set up so that Sheets("Number 2") can be renamed by the user, and data inputted on this sheet, but I require that the user not be able to move this sheet and the sheet preceding it.
View 5 Replies View RelatedI'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
Ok so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
View 3 Replies View Related