I would like to know how to write the macro that execute a formula everytime it detect an input in another column.
Attached is the example of what I want to achieve.
Macro to perform when entry detected.xlsx
I would like to write the code or create a macro that will execute when the value of a range of cells is greater than null. The macro or code that I would like to execute will UNHIDE a group of consecutive rows.
View 14 Replies View RelatedI'm creating a spreadsheet where a test note taker needs to repeatedly enter the date/time code in a column as events occur.
I tried recording a macro that will enter the =now() formula and then copy that over itself with the value but didn't work.
So now I'm thinking I need to just write code that will determine "now", and write that serial value to the next open cell (with care not to overwrite the previous data point). I'd like to execute this with a simple keystroke.
The thought is to start at the top of the column, go down until the next blank cell is reached, insert the time code (can't be a formula that will change but an actual value).
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
Have an optimization question for you. I'm starting to try to optimize my macros and I've heard/read it's best to not activate or select anything. - I assumed that meant it would be more efficient to run code without it.
I have a loop I run through about 600 times that takes .75 to .85 seconds to run through with the following piece:
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI coudn't find anything on this forum on this subject.
Is there a way to execute [trigger] a macro from within a formula?
e.g. Based on an IF statement result, execute macro1 if true or macro 2 if false?
modytrane
I have the following code:
[Code] .......
What do I need to change in order to make it execute the Call statement on EVERY item in the ListBox2, not the Selections.
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies View RelatedI have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.
x
y
z
[Code]...
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
I have three conditional formats on my spreadsheet:
View 9 Replies View RelatedI can drag it down to fill a series of cells within a column.
Let's say the formula in cell A1 is:
I have collected some data from survey respondents, and I have the following array formula:
=MIN(
IF($C$1:$C$400="happy",
IF($G$1:$G$400="tall",
IF($H$1:$H$400="american",
$F$1:$F$400
))))
What I'd like to do is make the 3rd criterion -- $H$1:$H$400="american" -- dependent on whether the string value in cell A1 ("Evaluate Americans only?") is "yes" or "no".
Because, my actual situation is considerably more complex (see below), I'm looking to insert a test within the MIN array formula to check the value of A1, and calculate the answer accordingly.
I'm aware that I could theoretically create two array arguments (one with & one without the American test), and place them inside an IF function that tests the value of A1. However that isn't practical for my real-world situation...
I occasionally see array formulas with all sorts of symbols that I don't really understand in the array context (such as * and | and . ), and I'm wondering if one of those magic symbols might be the doorway to my solution.
I have the following letters in cells
D2= A
D3=G
D4 =L
These represent Accomodation,Groceries, and Liquor.
Starting at E12 I want a formula , to drag down the column, which will show either Accomodation, Groceries or Liquor depending on the letter I put in cell D12,
Eventually I will possibly need help to summarise these costs on another sheet with other data such as fuel costs and fuel analysis but this will get me started.
I have a sheet that I enter time into in a 24hr time format, ie Military Time and cant figure out how to format the cell so that I can just type in the numbers and it automatically put it in the hour format. Currently I have to type in the hour then the colon the the minutes otherwise if I type in the time in a three or four digit format it just gives me 0:00.
View 9 Replies View RelatedI have tried to make a VBA that would allow me to type in:
10657 and have the VBA to automatically convert that into a timeformat -> 1:06:57.
It works ok as long as the typed number is 4 digits or shorter.
If i type 12345 I would expct to get 1:23:45 but I get 00:00:45
Private Sub Worksheet_Change(ByVal Target As Range)
Dim VaValue As Variant
TCol = Target.Column
If Not (TCol = 5 Or TCol = 6) Then Exit Sub '
I've got a spreadsheet set up for a simple barcode scanning system. The user scans the barcode of the product when complete, and it logs it to a sheet along with a date & time timestamp. I'm then planning to use a v-lookup (barcode to product name) & pivot-table to count instances of 'product name' so that I can monitor what is being produced easier, nothing too tricky.
The problem I'm having comes from the products of the same spec having the same barcode, so data validation is hard to apply, as I can't 'not allow dupes' - the concern I have is that if the user unknowingly (or knowingly!) scans the same ticket twice, I think I've got 2 of a product when I've only got one. The idea I had was to lock all cells for a set time period (say 1 minute) after an entry so that it couldn't be accidentally scanned twice.
I want to be able to type a 24 hour time into the column and have it format with colons - for example: I want to type 123456 and have it show up as 12:34:56
View 5 Replies View RelatedHow can I get an automatic time & date entry into cell B1 based on a alphanumeric entry in cell A1. The time and date must not re-calculate every time the workbook is opened.
View 4 Replies View RelatedI have entered VBA code and tested it with success. If I then save & close the excel file and then re-open it, the mask time entry is not saved (time does not appear correctly after input) and per instructions I have designated (and am using) the cell input range.
View 9 Replies View RelatedTextbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
I have a worksheet that I enter time values into individual cells:
A1 = 6:00
B1 = 12:00
C1 = 12:45
D1 = 17:15
When I enter these values, I would like some of the values to round to the
next higher "30 minute increment" such as Cell C1 should become 13:00.
I would also like some of the values to round back to the next lower "30
minute increment" such as Cell D1 should become 17:00.
I have cells on my spreadsheet which contain: =now() and they work as they should - displaying the date and time at the moment of entry. Unfortunately the cells update when other info is added at other locations on the sheet - is there a way to ensure they enter the current 'now' only at the point of initial entry - such that the data doesn't then alter?
View 3 Replies View RelatedI am looking for a formula or VBA that will be in each in cells D5:D300 and will look at the value entered into the cell in column C and change the 4 digits into the date and time in the same format as NOW() returns.
Example
2045 becomes 17/02/2012 20:45
But I would also want it to see if the 4 digits that represent the time are after 14:00 and before 00:00 then the date would be the date in cell A1-1
example
Cell A1 18/02/12
2045 becomes 17/02/2012 20:45
I'm making a data entry form for a user, and one of the fields is in a time format (mm:ss). Is there any way that I can validate that field in "cmdOK_Click()" so that when the user clicks "ok" on the data entry form, if they haven't entered a date a msgbox comes up.
I tried IsNumeric with an If function but to no prevail.
Is it possible to have a cell, say B1 - which will return the Time and Date Value of when something is entered into Cell A1?
Example, I type "Hello" in Cell A1.
Now B1 will show me the Time and Date which i typed in Hello into A1.
I need a function that records the time and date in a cell, say a2, when data in entered in to another cell, say a1 in the same spreadsheet.
This way I can tell when data in a cell in my spread sheet is updated.
I want to time stamp when I make an entry in to a cell. Example when I enter a name in a32 I want l32 to time stamp the time I entered the name.
View 10 Replies View RelatedI have a problem with entering 12-hour time data in excel.
If I key in 3:00, Excel will recognise it as 3:00 AM.
If I key in 3:00 p, Excel will recognise it as a text entry. To get Excel to recognise it as 3:00 PM, I have to use the 24-hour format. i.e. I have to type 15:00.
I have checked the Regional and Language option in the Control Panel. Everything looks fine.
Does anyone have such encounter with Excel before?