Extract Reference Numbers In Given Month With Date?
May 18, 2014
I have attached an example spreadsheet which should be relatively intuitive over me trying to explain it.
I am wanting to extract all CJ numbers with the corresponding dates from Sheet 1, into Sheet 2. It has to factor in, engineer name (as stated on sheet 2), the Month (as stated in sheet 2 "May") with the "Attended site" date in sheet 1....
If you see the worksheet it should give you the whole picture with a fair amount of clarity.
I have a date as 1/1/11 format in a date-formatted cell A1 for example. I want to extract the month in MM format, i.e. January, or "1" is extracted as "01", etc and just place it into A2.
So far, I've found an option to use format function in VBA and "MM", but I'm not familiar with VBA yet.
I need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
I'm trying to link two different budgets into a third spreadsheet. The final step I'm attempting to accomplish is have an if-and statement reference just the month from a date-formatted cell. One of my departments tracks their budget on a daily basis, i.e. 11/2/2009, 11/3/2009, etc. rather than just 11/2009. I want the if-and statement to return the budget from all days in a given month so i can apply the formula to the whole year, broken down monthly too. I saw a question similar to this one but didn't see any responses so I'm not sure if it can be done.
My data sheet has a Month column, and those months are simply numbers one to twelve. They are formatted as plain old numbers. The data is coming from somewhere outside Excel.
How the numbers look in the data sheet doesn't matter. But I use this data to generate pivots, wherein the months are the columns. I want it to say Jan, Feb, etc. across the top of the pivot.
I realize that I could just loop through the raw data and convert the numbers to text. However, I want the pivot table to recognize this data as dates, so that I can do date-related stuff, such as the date grouping described on p. 85 of Jelen's Pivot Table Data Crunching book.
If I go into the raw data and try to convert the cells to the mmm format, they all convert to January.
I'm aware that formatting doesn't translate from raw data to pivot table anyhow. But it's not clear to me how I can use the date field grouping functions without somehow showing Excel that these are dates. Or is the pivot table smart enough to realize that just by the names, even if they are formatted as text?
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have log data in two columns: Column A: Date/time (at 30 minute intervals) Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January 01/01/2000: blank cell 08/01/2014: January 01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
I have a spreadsheet which in the first column has dates for every day of the year(for many years), and figures in the second column. I want to extract the data relating only to the month end dates. What is the best way to go about this?
The month end date may also only be the last working day of the month rather than the actual month end date
I have a value that has a whole number and a decimal. From this number I need to figure the Year and month. The worksheet has constant values from which this can be determined.
I need to extract text from a cell between 2 predetermined characters. Below find all possible cases and what result (after extraction) should look like:
Basically I need to extract numbers between (to the left) o or u and to the right + or -. The string ends always with 3 numbers if it. I have also attached excel file of these two rows for your convenience.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
I have two columns of dates, leave start and end dates (when people start leave i.e. annual leave). Would need to introduce column(s) to calculate how many days fell within the month including the end date and excludes weekends.
For example, if the staff on leave from 31st March to 6 April, i need to show that the number of leave taken as 1 day in March and 4 days in April.
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _ Title:="Enter Date") ' Validates the entered date is a valid date If (IsDate(dNewMonth) = False) Then
I have a table that looks like this (its basically a historical data of a stock exchange):
Date Index January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range. Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
