Extract Month For Seemingly Date Field?
Nov 7, 2013I need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.
View 4 RepliesI need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.
View 4 RepliesI need VBA code to sort the birthdays for all the employees in my company.
See the attached file for example.
I need to sort according to their month and then date and not with their year.
i.e it should not consider Year for sorting.
I have a date as 1/1/11 format in a date-formatted cell A1 for example. I want to extract the month in MM format, i.e. January, or "1" is extracted as "01", etc and just place it into A2.
So far, I've found an option to use format function in VBA and "MM", but I'm not familiar with VBA yet.
I have attached an example spreadsheet which should be relatively intuitive over me trying to explain it.
I am wanting to extract all CJ numbers with the corresponding dates from Sheet 1, into Sheet 2. It has to factor in, engineer name (as stated on sheet 2), the Month (as stated in sheet 2 "May") with the "Attended site" date in sheet 1....
If you see the worksheet it should give you the whole picture with a fair amount of clarity.
Book1.xlsx‎
I have a column with the following values:
SubmitDate
November 8, 2012 1:37:07 PM GMT+05:30
November 8, 2012 9:32:03 AM GMT+05:30
November 8, 2012 4:32:54 AM GMT+05:30
November 7, 2012 10:28:11 PM GMT+05:30
November 7, 2012 8:36:43 PM GMT+05:30
November 7, 2012 6:33:13 AM GMT+05:30
[code]......
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
So, this works perfectly by itself: {= SUM(IF(MONTH(I4:I17)=1,G4:G17,0))}
And this works perfectly by itself: {=SUM(IF(YEAR(I4:I17)=2007,G4:G17,0))}
But this doesn't work at all: {=SUM(IF(AND(MONTH(I4:I17)=1,YEAR(I4:I17)=2007),G4:G17,0))}
SUM by both a specific month, and a specific year from a single date field?
In the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
IdeasList
*
J
K
2
Status
Month Completed
3
In Progress
*
4
Complete
Jul-13
5
*
*
6
*
*
Data Validation in Spreadsheet
Cell
Allow
Datas
Input 1
Input 2
J4
List
*
=ValidationList_Status
*
K4
List
*
=ValidationList_Months
*
in coverting these fields into a date field.
Example 91306 to 060913
I have encloed the file.
I am trying to count the number of times that data is in a field and in any field the date is greaert than today's date. This date field could be blank and that is where I am having the problem.
Example
See Attached
I run this report from ADP and it only comes out in PDF or txt. I copied and pasted it to Excel, but it comes out funny. Below is a sample of the data from one field and I am trying to extract the 6 digits (it's the employee ID) from everyones name with a macro to the adacent column (.i.e data is in col B3, I would like the output to be in cell B4)
The problem is the 6 digit numbers isn't in the same location and I didn't know how to extract it.
Sample Data
MEYOR,SAM 010046 A 07/30/1979 -----> 010046
000548 A MOLINA,DARREN 06/01/2002 -----> 000548
i need to populate a field to show the month and year as follows: the data is entered in one field like this: 01/09/2006. i need another field to populate this: Jun 06. i have tried to use a few formulae but to avail. look forward to your response
View 4 Replies View RelatedI have a pivot table with dates in the row filter as listed below. I want to group by month. For some reason when I select one of the dates and try to click the Group Field button in the pivot table tools menu it is blanked out and will not allow me to do so.
4/1/20085/1/20086/1/20087/1/20088/1/20089/1/200810/1/200811/1/200812/1/20081/1/20092/1/20093/1/20094/1/20095/1/20096/1/20097/1/20098/1/20099/1/200910/1/200911/1/200912/1/2009
I have a file where comments are used for some cells. The user does not insert any text into these comments fields, but uses the comments feature to display pictures.
A picture is used for the fill pattern of the cell (inserted through fill effects) and that picture is what is displayed when someone moves the mouse over the cell.
The "fill pattern picture" becomes part of the excel file and my question is how can I extract this picture and use it somewhere else.
I'm very new to excel. I need a formula to put in a column (I) that returns ONLY a five-digit zip code from the adjacent cell in column J, which is a full address. Nearly every entry is written differently, and many do not contain a zip code. I would like the cell to be blank if the cell in J contains no zip code .
I'm using the formula:
=MID(J5,MATCH(TRUE,ISNUMBER(-MID(SUBSTITUTE(J5,"","#"),ROW(INDIRECT("1:"&LEN(J5)-4)),5)),0),5)
This formula sometimes returns -**** format numbers, considering them to be negative and still five-digit. It also returns #N/A if no zip code is present, and I would like this to be blank. I'm sure I can nest the formula within an IFF, but have not been able to make it work myself.
a formula to extract the numbers into two separate fields. The text may vary in length and the numbers vary in length also from 1 digit to 2,000,000.
Data in A1 is as follows:-
Meter reading Old:1345 New:67890
Trying to pass an array to a procedure to use as criteria in advanced filer.
My code below is raising this error:
Run-time error '1004':
The extract range has a missing or illegal field name
rngData. AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=rngCrit, CopyToRange:=rngDest, Unique:=False
Private Sub btnOK_Click()
Dim arrValues()
Dim lngI As Long
Dim lngX As Long
With Me.lstAccounts
If .ListIndex <> -1 Then
For lngI = 0 To .ListCount - 1 ................
"Extract range has an illegal or missing field name"
I am trying to use a simple advanced filter (unique) function. Any ideas on why I could be getting this error?
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
I need to extract the month and day from a date / time string into another cell. An example of the string is 1/28/2014 10:26
I want the result to be 1/28
ABC12/15/12february
extract the month from cell A1
Cell is input as 01.01.2007. Using =MONTH
formula I am unable to get 1.
Any thoughts on how to extract the month from the middle
digit.
How to correct this formula to get correct output.
=IF(P9=TODAY(),IF(P9<>"",CHOOSE(MONTH(P9),
"January","February","March","April","May","June","July","August","September","October","November","December"),""))
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January
01/01/2000: blank cell
08/01/2014: January
01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
I have a problem calculating something that happened last month if the month is january. At the moment, if the month is not January it works:
View 3 Replies View RelatedI have a spreadsheet which in the first column has dates for every day of the year(for many years), and figures in the second column. I want to extract the data relating only to the month end dates. What is the best way to go about this?
The month end date may also only be the last working day of the month rather than the actual month end date
Please refer to attached worksheet.
I have a value that has a whole number and a decimal. From this number I need to figure the Year and month. The worksheet has constant values from which this can be determined.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).