I'm doing a statistics workbook there I need to add untill the given value in the cell
ex: if gave 5 in the cell we want to get the total until only to 5th cells
(M/M/S)FIFS/INF/N)
No of Server
3
l
0.20
n
Coeffient
P(n)
[code]....
We changing the value in N=5
Search upwards in a column find the first cell with data and give the date in column A on same row as data?
View 9 Replies View RelatedI'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I am currently using the .resize function to give a specific value to each cell within a range.
First of all, is it the most efficient way to do it?
If so, why am I getting error "Application-defined or object-defined error"
with this code :
Code:
ThisWorkbook.Sheets("Merge").Range(Cells(3, 2), Cells(4000, 2)).Resize.Value = "TEST"
FromToTriggerrange26Stop-lossrange25Combination triggerlevelie: 4Combination stop levelie: 5Profit $10
How can I make "Solver" run a check on which combination of trigger and stoploss that gives the highest profit? The range is in two different cells, but I can't get it working. I guess that it's my lack of skills, and not "Solver" that isn't complex enough.
I'm trying to write a formula that searches for the name of the column on one sheet, finds that column on another, then results in the column letter. So, ideally, if the first three columns in the first tab were "Team," "Name," and "Total," respectively, I just want a formula to search for "Name" and give me back "B."
I want to do this in case anybody ever moves the "Name" column, for example, from column B to column C -- so then it would search for "Name" again and change the range in the formula to "C" because that's where that data lives now.
Currently, I'm using it for a COUNTIF() function that is a very simple: =countif(indirect("'"&$A2&"'!K:K"),$B2), where A2 is the sheet name. The latter half of $B2 is fine -- but I would love to have a more complicated formula take the place of the range "B:B" in case the "Name" column ever got moved.
I have a list of sites and depending which site I select from my drop down box I want to retrieve that data from my full data sheet. How can I go about doing this?
View 3 Replies View RelatedI need a formula (or formulas) to give me the "coordinates" (Column & Row location) of a certain value in a large rectangular range. Intuitively this should be doable with a smart combination of VLOOKUP, HLOOKUP, INDEX, MATCH, ADDRESS and/or CELL functions (maybe in the form of "array formulas") but I can't seem to find the way...
Here is an example of what I need:
I have a large rectangular range (A10:F500), full of numerical values. Then in cell A1 I have one of the (many) values contained in the range, let's say, 3.14159. I need two formulas that give me the following:
a) A formula in cell B1 that tells me in which COLUMN of the range the value 3.14159 is located
a) A formula in cell C1 that tells me in which ROW of the range the value 3.14159 is located
If the range consisted of a single column (or a single row), this would be an easy INDEX and MATCH combination.... but I'm dealing with a *rectangular* range here...
In 1 cell i need a forumla to give me a starting number and take one away each time a code or codes are dislayed in a cell range. Something like this
A1 = 23 days or any number days i needed
Cell range B1:C52
every time a selected 1 or 2 letter code appears in the cell range i want A1 to subtract 1 day from the starting number, i would need it to subtract half a day if one code appears ie HD, the codes may be P, OT, HD
I am using the following code.
Function VLOOKUPRow()
Dim SV As Object
Worksheets("Midterm").Select
SV = "UserFormAppend.TextBoxInvID.Text"
VRow = Columns(1). Find(What:="SV", After:= Cells(1, 1), _
LookIn:=xlValues, SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, MatchCase:=True).Row
MsgBox (VRow)
End Function
I am trying to give the VRow variable the value or the row that The text from my text box is on. How do you make the what look for a variable. I can get it to work if i put a constent in the what. how to make the what look for a variable. I'm new at this forum thing so im not quite sure how to check for answers.
Column A contains multiple data, work order, account number, account name such as "#12345 555 hello"
I have a list of account numbers and want to see if or not these account numbers are listed in column B.
I tried =IF(ISERROR(SEARCH("555",a1)),"","Yes") and it did work for the one cell, but how can I change the search cell from H30 to an entire row? Also, is there a way to reference column B that has the list of account numbers instead of having to manually type in the 555? So, have it say something like this:
=IF(ISERROR(SEARCH(B1,A1:A30)),"","Yes")
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
I have the following columns and rows that I need to MOD by 15. Once they have been MOD, I need to set a range and find all numbers in that range of say, eg; all number between 9.6 and 9.8. Really hope someone can help, have been working on it day and night. I can do them one at a time, but is very time consuming. Is there a formula that will do the whole worksheet in record time?
2/18/1975, 156.7519, 175.8083, 235.4675, 253.765
4/11/1973, 237,7642, 346.5342, 113.3145, 321.435
5/12/1985, 342.7625, 123.4233, 253.4321, 357.234
etc.
etc.
etc.
I have an Inventory Workbook were Item codes in Left column and Date in top row. I am using the Vlookup formula Its displays only the first value. If their are repeated dates for the same Item code I want to sumup the value according to the Date for that Item code. find the attached sample file
I need to update the vlookup formula in the output, so that it takes the values accordingly and sumup.
I am not sure if I have explained this clearly; however, you will understand better if you see my attached file with examples of my expected output.
Im trying to figure out to give a certain word a numeric valuve in excel?. Lets say that the word "car" has the valuve of 10, and the word bus has a value of 20. Have found one possible way to get around being forced to give a certain word a value by doing alittle macro, but havent got it to work yet (and im not sure if its even possible to get it to work), I have a post in the macro section about it.
View 3 Replies View RelatedI have a formula now that is =right(C2,5)+0 that is working well. However the data has grown and sometimes there is also 6 digits now instead of 5. So I need it to pick up either one 5 or 6. When I change the formula to 6 it works but picks up a / which happens to be before the 5 digit # sequence when there is only 5 digits. It works great for the 6. Is there another way around this so I only get the numbre digits if there are 5 or 6 and not the /. Maybe an if statement. I've tried several ways but none work right. The only other thing I can think of is to get it as above with the =right(C2,6)+0 and then afterwards to a find and replace and remove the / from the data. I was just tryign not to add an extra step to the process. Any ideas please?
Example of the data in coloumn C2 is:
15/2000/4567/NA/NA/97305or with 6 digits at the end15/2000/4567/NA/NA/973052there is always just 5 or 6 digits at the end that I need.
I have a excel sheet with 3 columns. In column B and C there is either a number, or empty. If both for instance B1 and C1 is empty, i want A1 to automatically be filled in with the number 1. If there is value in one of them, then i dont want anything in column A.
View 3 Replies View RelatedI want to count a range of cells and if the value of those cells is 5 and over, i want it to give a 1 and if its under 5, i want it to give a 0. I've attached a file of what i'm after, row 13 is where the formula would go, i have just put in the values.
View 1 Replies View RelatedI would like to write a formula to have a result in a cell that gives me the maximum value of a column, but smaller than another cell.
For example:
C1 = Maximum value in column A1:A20, but smaller than B1.
Can i find a list anywhere of the new Excel 2007 ALT numbers to give the symbols eg Alt0186 = the degrees symbol in 03 but doesnt work in 07?
View 10 Replies View RelatedI have around 500 csv files, each with four columns of data. However, the first column does not have a heading. Is there any way I can give the column name to the first column in each of 500 csv files? Here is one of the csv files:
name1 name2 name3
1774.77 4.15 29.28
17810.45 6.2450.36
18257.86 16.9169.11
18326.46 20.1 18.93
1841.48 20.29 0.95
1850.84 20.45 0.79
2031.49 3.44 8.86
2040.06 3.41 -0.87
2050.02 3.37 -1.17
2060.91 3.51 4.15
20711.35 2.77 -21.08
2085.23 3.51 26.71
2090.02 3.51 0
2100 3.5 -0.28
2110.06 3.33 -4.86
21229.25 6.91 107.51
Excel 2003
Lets see if I can even explain what I want to do.
will have a date column
Will have a total calorie column (this will be a sum of several column containing individual foods)
On a separate worksheet (food sheet) will be a list of foods in one column and their calories (per serving) In the next column.
On the first sheet I want a drop down that lists all the foods on the "food sheet). selecting from this drop down will use a vlookup (or hlookup - depending) to arrive at a caloric value.
So here is (are) the problems. (and the solutions need to be NON-VBA)
1. How do I tie the drop down selection to a vlookup (macro maybe)
2. How do I use that one drop down to populate any cell on sheet one?
can this be done without coding?
This will be an exercise for an excel class to teach vlookups, linked sheets,
making a dropdown, using a macro, formulas, IF statements............
The class is probably not ready for VBA which is why this needs to be a non-coded solution.
I am open to other solutions (related topic) that can bring together all of the above learning concepts
I have a LOG sheet where I am getting all my data from,
and a TIME and DUTY sheet..
COL A Has Dates, a4 to a34, Limited to 31 lines for the dates
and in col F I have # values, (1.2-2.2 etc).
The formula I have in Col F is
=SUMIF(LOG!$A:$A,#REF!,LOG!F:F)
but when i get to the end of the month, say for example the last 2 lines of the time and duty sheet, when a32 is 29/ Feb, the next row is blank and same with next row. (leap year).
How do I get the formula above to ONLY calculate when the cell in COL a on the same row, when there is a DATE value in COL a?
I have two workbook, test1 (master file) and the other one is test_10_05_2014 with 100 some of them being updated daily. The last portion of the file "test_10_05_2014" is the date and we have different file on daily basis.
using Indirect function in vlookup should give corresponding value for the particular name. Formula used is giving error,
[VLOOKUP(A2,Indirect(" ' "&E1&" ' !$A$2:$X$1000),6,FALSE)]
I need a formula to look in column B and find all "jun" (or anything else that I put in there) THEN look in column J and find only all "d" (d is one of 3 choices there) that correspond to the "jun" then give me the count of the "d".
This is an example. With the formula I can do a variety of things to get info that I'd like to have.
I have undertaken a project and have hit a brick wall.
I'll try and translate my request in the easiest way I can.
I have a piece of software that stores what software is installed on a machine when it connects to my domain.
I therefore have a list of software that is installed on machines that connect to my domain.
Each machine that connects to the domain has a unique identifier code.
At present I have about 500 different pieces of software on the various machines.
The unique identifier for the software installed on each machine is a combination of the application (column B), the program (column C) and the version (column D)
I wanted to give each seperate piece of software a unique ID number.
I was wanting to run a formula similar to the pseudocode below:
If $b$1="adobe" and $c$1="8.0.0.1" and $d$1="adobe reader", then "1",
elseif $b$1="adobe" and $c$1="7.0.0.1 and $d$1="adobe pro" then "2", else "no software ID"
I am thinking that if I can get every piece of software that is installed on the machines to have a software ID then I can create a software ID allowed list then I can create a formula to identify what laptops have software on the "allowed" and "banned" lists.
The problem at present is getting the sotfware to lookup what software ID they have as they need to check 3 columns with a lookup list.
This one sounds easy but I have spent a lot of time on it and no success. I have a list of students with various levels next to each name. EG: 4.5, 5.6, 5.7, 6.1 etc. From this range I want to work out the percentages of achiveing Level 5, 5 and above, Level 6, 6 and above. By doing a countif it counts 5 not 5.1 5.2 etc. How do I get over this? Attached is a sample.
View 10 Replies View Related