I have created a command button, right clicked the button and selected 'View Code'. In the code window I've entered the following code:
Private Sub CommandButton1_Click() IB_FB_Hedge_3 Outcome.range(W10:X11).ClearContents End Sub
As soon as I enter the code a message pops up:
Expected: list separator or )"
Is my syntax wrong? Is the sheet name, 'IB_FB_Hedge_3 Outcome' not allowed?
When I created this code a few minutes before I was not having the 'Compile error' problem, but the Command Button was not working either. When I clicked the command button it would just show the circles at the corners, suggesting that it is still in editing mode and not properly activated as a command button.
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5 E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
I want to create a command button that will clear whatever is written in a text box. I guess for this to work it needs to select all, then clear. The command button and the text box have been created using the control toolbox.
In ThisWorkbook Userform2 is triggered upon a double click
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
UserForm2.Show End Sub
Userform2 has Frame1 (Option Buttons 1-6) and Frame2 (Option Buttons 7-12)
Private Sub OptionButton1_Click()
Call ProjectBuildings Range("A1").Select End Sub
Private Sub OptionButton10_Click()
Call BondIndustrial Range("A1").Select
The user can click away and things work great. The macros that are triggered search a number of Workbooks and individual Worksheets looking to select either of two (hence the two Frames) specific items.
If the user clicks any Option Button in Frame 1 (works) then any Option Button in Frame 2 (works) then goes back to the same Option Button in Frame 1 (nothing) I have a problem.
How do I clear the first Option Button in Frame 1 after the user selects another Option Button in Frame 2?
I'm just finishing a project that is a collection of three calculators, each of which returns data based on a series of user-supplied variables. All the mechanics are working [thanks in part to replies to previous posts], but there is one more thing I'd like to add:
Does anyone have a way to clear the contents of another cell [actually several] cells via another cell? As the most complex calculator requires eight variables to be entered, I'd like to provide a quick way [a button?] to "clear" or "reset" the calculator - basically wipe all unlocked cells. I should note that all of the cells in question already have Data Validation of one type or another.
I keep encountering an error while creating multiple sheets within the same workbook. This is a known error by Microsoft as documented here. In order to avoid using multiple workbooks i need to clear excels cache each time I run the macro as i have limited users sheet creation to 30 sheets which should not trigger the error. Does any one know a code to clear excels cache or memory?
I have used cutcopymode = false but that does not do the trick.
I have seen this before in spreadsheets so I atleast know it is possible.
I have a worksheet that has 6 sheets in it. The final sheet is a formula page that only shows results if sheets 2-5 have data. Sheet 1 holds all the master data. Sheets 2-5 show subsets based on sheet 1. I manually atm filter sheet 1 for certain info and then copy paste into 2-5.
Seeing as I do this weekly. How would I go about adding in a 7th tab or even a macro that will delete all data from row3-end in tabs 2-5, then copy the appropriate data from tab 1 based on a set criteria?
I could write this in a macro just wondering if there is an easy built in way?
Function FindNth(Table As Range, Val1 As Variant,Val1Occrnce As Integer, _ Val2 As Variant,Val2Col As Integer, ResultCol As Integer) Dim i As Integer Dim iCount As Integer Dim rCol As Range For i = 1 To Table.Rows.Count If Table.Cells(i, 1) = Val1 And _ Table.Cells(i, Val2Col) = Val2 Then iCount = iCount + 1 End If If iCount = Val1Occrnce Then FindNth = Table.Cells(i, ResultCol) Exit For End If Next i End Function
To use this function, push Alt+F11 and go to Insert>Module. Paste in the code, push Alt+Q and save. Use the function as shown in graphic example. You can access it under "User Defined" in the Paste Function (Shift+F3).
Type Amount Sex Cost Purchased Cat 1 Male $ 5.00 22/05/01 Cat 2 Male $ 5.00 15/00/00 Dog 3 Male $ 20.00 25/04/00 Rat 5 Female $ 1.00 15/08/01..................
I am trying to create a command button in Microsoft Excel (Office 2000) that enables me to reset the check box status for a worksheet from checked to unchecked. The worksheet contains approximately 50 check boxes and is meant to be reused. Is this possible? If so, how can I program it to do so?
I need to figure a way to make to cells with dates equal each other if the day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
I have a command button that I want to appear to be flashing (by continually changing the button's font colour text) which a user can click at any time. I can (almost) do this now by using 'Application.Wait Now + TimeValue', but this doesn't allow the user to click the button until the code has finished running.
in my spreadsheet (attached), i want it so that when someone clicks a button, it will fill in the next available cell in column A. For example, when I click on the "Create" button on the green NIPRNet side, then it'll fill in the next available cell in column A (cell A4) with "(N) Created Account". Then, if I click on "Unlock" on the red SIPRNet Side, then it will fill in cell A5 with "(S) Unlocked Account". and so on, and so on, down column A.
At the moment, i have it so that all the cells in column A are dropdown menus. But I want to eliminate the drop-down menus and use buttons instead.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
So i got a few macros on a worksheet and one of them is simply :
Sub Pr_Removefilter() ActiveSheet.ShowAllData End Sub
Ive worked on the excel a couple of times, everything fine. Then it started crashing upon saving (after changes made that had no possible connection to the macro, on another sheet). After a few painfull trials and errors i located the problem to be this macro button. I erased it, created a new one with the EXACT macro and it works. Why?..
1) We need the Input screen to auto clear the fields once the " Save " button has been pressed and data transfered to the appropriate tracking sheet
2) We want to ensure that if any of the Red cells are empty the " Save " button will give an error ( one complication If the "Transfer Type" highlighted in Blue has an entry " either STD/ISD/ESP " then " Call Purpose " needs to be mandatory
3) somehow the information on the "Comment " field is not getting captured
4) If possible we want a warning indicator if two rows in a tracking sheet ( example London ) are the same based on Coloums B to I ( except C )
5) Is there any possibility to give a pop calender in the " scheduled date " section of Input screen (Row 33)