Any way to pull in information from a particular website directly to excel? For example if I have the URL or the specific web page can I then locate specific pieces of information that are contained in specific areas of the webpage and pull it into excel?
View 5 Replies
I have spread sheet with 2 tabs (MASTER LIST & CYCLE COUNTS), on each tab I have 2 columns(LOCATION1 & DATE1 and LOCATION2 & DATE2) I need to verify if I any cell from LOCATION1 is repetead on LOCATION2 and copy the informacion from DATE2 to DATE1. then if I update the CYCLE COUNTS sheet I want the MASTER LIST update by it self.
This is the formula that Im using but Im having problems with the range..... =if('Master list'!$A2$:$A$15000='Cycle counts'!$A2:$A$15000, 'Cycle counts'$B&2:&B&15000,0)
I am trying to put together a macro to pull data from one tab to another. The key here is that I want it to take the entire row.
Basically it will look something like this:
As someone goes down the rows of the checklist putting x's in the boxes that need one (there is a column set aside for that), that box will turn red.
That part is easy and done.
What I cant figure out how to do next is to automatically have a copy made of the row with the red cell and send them to another document.
I need a formula that will take info from sheet A column K only if sheet A
column E is equal to sheet B column E. I need it to paste into Sheet
B column K exactly as shown in sheet A column K.
I tried using a Vlookup formula but I got #N/A and I am not sure if that is
because there is text as opposed to numbers or if I am using the wrong
function entirely.
Is it possible to pull only certain information out of a cell?
I have in cell A1 (As of 6-30-12 and 5-31-12) i would like to put a formula in cell b1 to pull just (6-30-12 and 5-31-12) so that everything i change A1 B1 will also change.
I want to setup an excel spreadsheet that will list employees and when exams were completed on them. The exams need to be completed once a year. I want the excel spreadsheet to send out an email to their corresponding supervisors when is within one month or so of an exam needing to be completed so their exam can be scheduled accordingly.
I have searched this forum and read through some of the other posts regarding exporting data from excel to outlook. This seems like what I need to do but I wanted to see if anyone has an advice on what way is better than the other?
Also, if excel is setup to push the data to outlook, does the excel file need to be open? In other words if Jimmy comes within one month of his exam but no one opens the excel file will it send out the email to outlook?
Is it a better option/ or possibility to have Outlook pull/check to see if the condition exists where an employee is within a month of his exam and then let the supervisor know?
I'm using a v-lookup to pull information from one worksheet to another. I know that each of the cells has a match on the second sheet, but the calcuation is resulting in a Value Not Available error. The only way I've figured out to get past the error is to go into each cell, hit F2 and then enter.
View 2 Replies View RelatedI'm trying to do is create a macro that will autopopulate information from a source sheet. What I have is a different route sheet for 25 or so technicians within my company on one worksheet.
I want to be able to have a source sheet that I can change daily and have it autopopulate the information needed into the appropriate cells/sheets from this one source sheet.
I am pretty sure there is a way to do this, but I'm not familiar enough with creating macros to do this myself, although if I had an example of one cell and a simple explanation of how to fit this to the information needed I think I could do this on my own.
I need building a formula to pull information from a database file. The purpose is to try to interpret the data so that I can analyze a time period along with it's content. I don't know how best to explain it. Basically I have a table and I want it to pull information based on 3 criteria: time, type, and total. I would like for the formula to identify a time frame, then identify a type, and then take the totals and add them together.
Time / Type / Total
11:31 /1 / 4
11:43 / 1 / 6
12:04 / 2 / 1
12:31 / 1 / 3
Time / Type / Total
11:30 - 12:00 / 1 / 10
12:00 - 12:30 / 1 / 3
The top is the database and the bottom is basically what I want to happen on the other table. Pretend the / and dividers for each column.
I have created a spread sheet that uses the LOOKUP function to pull information from elsewhere in the sheet and automatically fill in a cell so that I can save time.
The spreadsheet has several columns with a single word or number but the column used for the lookup contains 2 words, 1 number and a “#” sign. I have used the “CONCATENATE” function to create a column that has all the words, the number and symbol and then my formula says to LOOKUP the value in the created column and return the number associated with that LOOKUP value. The problem is it will not give me the correct value. All cells with the formula return a value from the same row in the LOOKUP table no matter what the LOOKUP value..
I have used this exact same formula (copied and pasted it) in another place in the table with the LOOKUP information added by hand, not generated with the “CONCATENATE” function, and it works fine.
I am using an inputbox to pull over information from another sheet to be reviewed. The problem is that I can't get the cancel button to work. I am not having a problem with the ok button though.
Sub test()
Dim pull As String
pull = InputBox("How many would you like to retrieve.", "Retrieve", vbOKCancel)
If pull = vbOK Then
MsgBox "ok " & pull
Else
MsgBox "Cancel"
End If
End Sub
OK,I have a spreadsheet that prints receiving labels based on received purchase orders that pulls information from an SQL server. The problem is that it is pulling almost 40,000 lines of data to sort and pull at most 30 lines. One of steps is that the purchase order receipt register has a barcode that is scanned into a text box on a userform. Can I use this information to filter the SQL data pull to only grab that PO number? I'm at a loss on where to begin with this. Below is my SQL statement from the Query builder with an example of a PO number input(PO-rma100613).
[Code] ....
how to reference cells in 1 page from another and understand basic formula's, and would appreciate any input on how or if i can acheive what i'm trying to accomplish.
I have a worksheet with say 100 rows of information, it is a list of materials to go into a construction job. the columns to the right of the description calculate volume/quantity etc and produce a cost for the item. what i want to do is have a summary page that only lists the items that are being used, not all 100 items are in every job and i dont want to have to print the whole list with a bunch of empty values, which will just waste paper and ink. I'd like to enter a value in a cell or setup a check box or something that i could somehow use to then list that row or a part of that row of information on a seperate sheet, for a nice concise, easy to read list of job materials. i would like to do produce 1 sheet with the cost associated with the item, and one without cost.
I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies View RelatedI am trying to get excel to pull the value from a certain cell. The value is pulling correctly when I use whole numbers. But if I format that value as either a decimal or percentage it does not recognize it and only pulls over 0.
Here is the code.
[Code] ....
Using Excel 2010. I have 2 worksheets, saved in same folder (if that matters).
Worksheet 1=Master_List.xlsx
Column1
Column2
Column3
Column4
PartNumber
1002
Sony
Playstation
4D
W74859
Worksheet 2=Sample_List.xlsx
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Column1
Column2
Column3
PartNumber
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
1002
Sony
Playstation
Basically, I'm looking to populate the blank cells in the PartNumber column (Sample_List) by looking at the data in Column1, Column2, Column3 then going to the Master_List, matching up Column1, Column2, Column3. The PartNumber value in the row with the matching values would then be copied to the Sample_List.
I have an excel macro that works of off data that we pull from an access database and the only part being done manually is editing the query and importing the data to excel
What I would like is something in excel VBA that pulls the data from access. my thought is in access i would have a basic query that has the fields we need and excel would have a form to filter those fields as needed.
One of the fields is Date and another Location where we filter date ranges and locations. we currently go in to the query and filter the date range by hand and the locations we want by hand.
I am not that great in access so have not created any macros to pull the data from excel before so don't know what I am doing.
Looking for formula to extract data from the raw data table list to a new table list when an option is selected from the dropdown list.
Sample data attached and desired outcome in green color.
Outcome
Product 3
ProductTargetOff TargetTarget Range
January364980
February135732
March162167
April
May
June
July
August
September
October
November
December
I have an excel sheet where column B has a list of product codes. I also have a folder with pictures of each product and file name of the pictures are the product code. I would like to place the picture of each product in column A beside their respective codes. If possible, I would also like to reformat the pictures so they fit in the cell. (3.00 x 3.85)
Need a Macro that can run this.
I have an excel sheet where column "B" has a list of style numbers . I also have a folder with pictures of each product and file name of the pictures are the product code. I would like to place the picture of each product in column "A" beside their respective codes. If possible, I would also like to reformat the pictures so they fit in the cell. Size= (3.00 x 3.85)
I want to be able to press for example :CTRL Q and all the the pictures will pull from the folder on my PC and populate in column A next to their respective style # in column B.
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I threw together some sample data, just to test things out. It's very basic, one table of "Customers" and another table with the 50 US State's and their corresponding abbreviations. In the "Customers" table, there is a column of state abbreviations, and in the "States" table there is a column of state abbreviations as well. I have a relationship set up between these two in PowerPivot.
Each "Customer" in the "Customers" table has a unique "User ID". In some states, there are multiple "Customers" (User ID's).
When I try to pull a PowerPivot Table off of these tables, it's showing me all the states as being associated with every user ID. It looks correct if I just pull in the "States" column and the "User ID" column from the "Customers" table...
image1.jpg
But as soon as I drag in the "Full State Name" column from the "States" table, it screws up the PowerPivot Table and shows all the state names being related to the state abbreviations, and all the User ID's as being related to all the states. (This isn't the full image of the table, only part of it, since the full image would be too large).
image2.jpg
I'm used to doing everything with VLOOKUP's, and seldom used PivotTables at all in the past. But it was my understanding that these new PowerPivots would eliminate much of the need for VLOOKUP's.
I have Excel 2003
My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.
I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.
I want to pull 'values' from a website off into column's "A" "B" and "C."
What I am looking for is:
Column A: The current date!
Column B: The closing VIX value of the day!
Column C: The 10-day-moving average value of the VIX for that same day!
All values come from this website: [URL].......
(full link so it doesn't look sketchy; also a link to mainwebsite: [URL] ..... )
What would be the formula for this? Or how would one go about this? And preferably the time to pull these values would be at alterable, but ideal time is hard to choose right now... Need to think about it!!!
So I am trying to pull data from multiple sheets. I've gone through the thread, but haven't found an answer yet (or didn't work hard enough). On Sheet1, yellow highlighted column, I am trying to look up the I.D. Code for 36 month residuals. As you can see, I have to use multiple conditions on different worksheets.
I have to use most of Sheet1 columns to find the answer. I just can't figure the formula out.
I don't have Excel 2007, only 2003 I have.
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
As part of report consolidation I need a Macro that can read through all the files in a particular location(Say a folder path) Pull the data for each unique products into separate sheet
In the example below : All the rows with "Chocolates to sheet 1" , Drink to Sheet 2 and so on Since the products in column 3 can vary the unique sheets need to be created at run time based on the source data
Workbook1
WEST
100
Chocolates
[Code]....
I have created a worksheet with Excel 2007, which includes a pull down list. Within this list are 2000 unique numbers in a separate worksheet this data is pulled from. Is there a way to dim or change the color of numbers previously used so that when the list is used again, it is easier to see where I left off?
View 1 Replies View RelatedI am using Excel 2010.
My objective is to pull specific values from an external file corresponding to the correct name and year of my choosing. The first way I thought would be best is to use an INDEX/MATCH function. The problem is the external files change names so I would need a method to easily change the source file name from one cell. I then stumbled across the INDIRECT function, but the INDIRECT function will only work when the source file is also opened. I then came across Harlan Grove's pull function which allows you to import data from closed excel files.
So, this is what my formula looks like: =INDEX(pull("'"&G12&"");MATCH(C15;pull("'"&G14&"");0);MATCH(D15;pull("'"&G16&"");0))
Cells G12,G14, and G16 contain the file paths for the ranges. C15 is name and D15 is year.
The problem I have though is that when I try to execute the function, Excel gets stuck. if the code cannot handle large amounts of data. I tested the code with a simple SUM function for a small range from an external file and it worked just fine.
This is the code I am using:
[Code] ...
