Macro To Pull Information From One Tab To Another
Dec 9, 2009
I am trying to put together a macro to pull data from one tab to another. The key here is that I want it to take the entire row.
Basically it will look something like this:
As someone goes down the rows of the checklist putting x's in the boxes that need one (there is a column set aside for that), that box will turn red.
That part is easy and done.
What I cant figure out how to do next is to automatically have a copy made of the row with the red cell and send them to another document.
View 13 Replies
ADVERTISEMENT
Oct 5, 2012
I have spread sheet with 2 tabs (MASTER LIST & CYCLE COUNTS), on each tab I have 2 columns(LOCATION1 & DATE1 and LOCATION2 & DATE2) I need to verify if I any cell from LOCATION1 is repetead on LOCATION2 and copy the informacion from DATE2 to DATE1. then if I update the CYCLE COUNTS sheet I want the MASTER LIST update by it self.
This is the formula that Im using but Im having problems with the range..... =if('Master list'!$A2$:$A$15000='Cycle counts'!$A2:$A$15000, 'Cycle counts'$B&2:&B&15000,0)
View 1 Replies
View Related
May 26, 2006
I need a formula that will take info from sheet A column K only if sheet A
column E is equal to sheet B column E. I need it to paste into Sheet
B column K exactly as shown in sheet A column K.
I tried using a Vlookup formula but I got #N/A and I am not sure if that is
because there is text as opposed to numbers or if I am using the wrong
function entirely.
View 10 Replies
View Related
Jul 1, 2012
Any way to pull in information from a particular website directly to excel? For example if I have the URL or the specific web page can I then locate specific pieces of information that are contained in specific areas of the webpage and pull it into excel?
View 5 Replies
View Related
Jul 16, 2012
Is it possible to pull only certain information out of a cell?
I have in cell A1 (As of 6-30-12 and 5-31-12) i would like to put a formula in cell b1 to pull just (6-30-12 and 5-31-12) so that everything i change A1 B1 will also change.
View 4 Replies
View Related
Aug 12, 2009
I want to setup an excel spreadsheet that will list employees and when exams were completed on them. The exams need to be completed once a year. I want the excel spreadsheet to send out an email to their corresponding supervisors when is within one month or so of an exam needing to be completed so their exam can be scheduled accordingly.
I have searched this forum and read through some of the other posts regarding exporting data from excel to outlook. This seems like what I need to do but I wanted to see if anyone has an advice on what way is better than the other?
Also, if excel is setup to push the data to outlook, does the excel file need to be open? In other words if Jimmy comes within one month of his exam but no one opens the excel file will it send out the email to outlook?
Is it a better option/ or possibility to have Outlook pull/check to see if the condition exists where an employee is within a month of his exam and then let the supervisor know?
View 2 Replies
View Related
Dec 9, 2009
I'm using a v-lookup to pull information from one worksheet to another. I know that each of the cells has a match on the second sheet, but the calcuation is resulting in a Value Not Available error. The only way I've figured out to get past the error is to go into each cell, hit F2 and then enter.
View 2 Replies
View Related
Aug 17, 2007
I'm trying to do is create a macro that will autopopulate information from a source sheet. What I have is a different route sheet for 25 or so technicians within my company on one worksheet.
I want to be able to have a source sheet that I can change daily and have it autopopulate the information needed into the appropriate cells/sheets from this one source sheet.
I am pretty sure there is a way to do this, but I'm not familiar enough with creating macros to do this myself, although if I had an example of one cell and a simple explanation of how to fit this to the information needed I think I could do this on my own.
View 9 Replies
View Related
Apr 26, 2012
I need building a formula to pull information from a database file. The purpose is to try to interpret the data so that I can analyze a time period along with it's content. I don't know how best to explain it. Basically I have a table and I want it to pull information based on 3 criteria: time, type, and total. I would like for the formula to identify a time frame, then identify a type, and then take the totals and add them together.
Time / Type / Total
11:31 /1 / 4
11:43 / 1 / 6
12:04 / 2 / 1
12:31 / 1 / 3
Time / Type / Total
11:30 - 12:00 / 1 / 10
12:00 - 12:30 / 1 / 3
The top is the database and the bottom is basically what I want to happen on the other table. Pretend the / and dividers for each column.
View 9 Replies
View Related
Apr 18, 2008
I have created a spread sheet that uses the LOOKUP function to pull information from elsewhere in the sheet and automatically fill in a cell so that I can save time.
The spreadsheet has several columns with a single word or number but the column used for the lookup contains 2 words, 1 number and a “#” sign. I have used the “CONCATENATE” function to create a column that has all the words, the number and symbol and then my formula says to LOOKUP the value in the created column and return the number associated with that LOOKUP value. The problem is it will not give me the correct value. All cells with the formula return a value from the same row in the LOOKUP table no matter what the LOOKUP value..
I have used this exact same formula (copied and pasted it) in another place in the table with the LOOKUP information added by hand, not generated with the “CONCATENATE” function, and it works fine.
View 9 Replies
View Related
May 30, 2008
I am using an inputbox to pull over information from another sheet to be reviewed. The problem is that I can't get the cancel button to work. I am not having a problem with the ok button though.
Sub test()
Dim pull As String
pull = InputBox("How many would you like to retrieve.", "Retrieve", vbOKCancel)
If pull = vbOK Then
MsgBox "ok " & pull
Else
MsgBox "Cancel"
End If
End Sub
View 9 Replies
View Related
Jul 30, 2014
OK,I have a spreadsheet that prints receiving labels based on received purchase orders that pulls information from an SQL server. The problem is that it is pulling almost 40,000 lines of data to sort and pull at most 30 lines. One of steps is that the purchase order receipt register has a barcode that is scanned into a text box on a userform. Can I use this information to filter the SQL data pull to only grab that PO number? I'm at a loss on where to begin with this. Below is my SQL statement from the Query builder with an example of a PO number input(PO-rma100613).
[Code] ....
View 5 Replies
View Related
Jul 1, 2008
how to reference cells in 1 page from another and understand basic formula's, and would appreciate any input on how or if i can acheive what i'm trying to accomplish.
I have a worksheet with say 100 rows of information, it is a list of materials to go into a construction job. the columns to the right of the description calculate volume/quantity etc and produce a cost for the item. what i want to do is have a summary page that only lists the items that are being used, not all 100 items are in every job and i dont want to have to print the whole list with a bunch of empty values, which will just waste paper and ink. I'd like to enter a value in a cell or setup a check box or something that i could somehow use to then list that row or a part of that row of information on a seperate sheet, for a nice concise, easy to read list of job materials. i would like to do produce 1 sheet with the cost associated with the item, and one without cost.
View 9 Replies
View Related
Oct 24, 2008
I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.
View 9 Replies
View Related
Mar 1, 2013
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies
View Related
Jan 7, 2010
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
View 2 Replies
View Related
Oct 18, 2004
I want to create a macro that will automatically pull data from the web by simply pressing a macro button. I assume that this would be an easy task if the data is from a website with a specific URL such as [URL]
However, there are times when someone must enter data into the web to pull a specific report that does not have a unique URL. Is there anyway to create data fields in excel that would allow an individual to type in specific information (name, report period, etc.), and then press a macro button that would go out to the web, enter the information automatically, and export it as an excel file. I realize that this is probably substatially more difficult than my first question.
View 9 Replies
View Related
Mar 19, 2007
Need to create a macro that pulls certain data of a certain varying limit to different sheets, e.g. I have a sheet titled 'Data Dump' which contains lots of information specific to certain models of a product. I would like two other worksheets, one called '1' and another called '2' to pull the following information:
Worksheet 1 should pull data in columns A, B and I (in data dump) based on whether column H in Data Dump is = 1 to the total of 100 (i.e. 100 rows of information. (here an if statement would pull 100 and include empty rows, I do not want empty rows). Worksheet 2 should pull data in columns A, B and I based on whether Column H in Data Dump is = 2 to the total of 50 (i.e. 50 rows of information.
View 2 Replies
View Related
Nov 29, 2011
I Have a workbook which consists of 50 worksheets and i use Edit query window to pull the data from oracle on all these sheets. We run this once in a month. I have to go to every sheet and execute this code which is time consuming and i have to change the date value everytime. macro that can execute this process at once and we should give the date only once.I use OLEDB driver to connect to oracle.
Attached is the Command line code.
Select protocol, patient, Page, (date_indexed) Indexed,(first_entry_date) FirstPass,( second_entry_date) SecondPass,trim( modified_date) modified, trim(CRF_ERROR_COMMENT) Comments from JJA38377_96_crf where date_indexed>='1-May-11' and date_indexed
View 2 Replies
View Related
May 25, 2012
macro listed below. Currenlty the macro pulls the last 12 months as long as the data that is pulled is current. However, if the data is 2 months old for example, it only pulls 10 months instead of 12. modify this macro so that it alway pulls the last 12 months. I'm assuming that the minimum date would have to be found first and then go backwards from there?
Code:
Dim PI As PivotItem
Dim d As Date
Dim Twelve As Date
[Code].....
View 6 Replies
View Related
Mar 15, 2013
I'm trying to create a macro that I can assign to a clip art pic that will pop up the Insert Hyperlink prompt when I click on the picture. So basically anytime I click on the pic for the 1st time I'd like to be able enter the url address of my choosing but if I were to click on that pic again I want it to go to the Hyperlink address I previously entered.
I should note that I tried recording a macro by first by clicking on Record Macro then press ctrl + k and then click Stop Recording but it wouldn't stop recording. I had to first click Cancel on the Insert Hyperlink prompt and then I was able to Stop Recording so this attempt was unsuccessful.
View 2 Replies
View Related
Mar 12, 2014
My workbook has several worksheets so do you need the name of those to be excluded? Or how many sheets i require which are located to the right of the summary tab?
Detail - 5 sheets to the left of summary tab are to be ingored, 7 to the right of the summary are to be pulled (let's say they're named Red, Green, Blue). I only want the colour named tab data pulled and pasted into the summary
Code is below :
Sub karryan()
Dim i As Long
For i = 1 To 3
Sheets(i).UsedRange.offset(1).Copy Sheets("Summary").Range("A" & Rows.count).End(3)(2)
Next i
End Sub
View 1 Replies
View Related
Jul 10, 2014
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
View 9 Replies
View Related
Mar 4, 2007
I need to pull out data from a word file(can open in excel 2003) which has several different rows with data in a certain format each time.
I want to take the data from sheet #1 in the format
________
where the underline always equals an 8 digit number that directly follows that unique text(no spaces)
and pull out all the 8 digit numbers from the sheet and put them into sheet #2 that my macro creates.
Also the additional rub is that I need to pull only the unique 8 digit numbers as there will be several repeats.
View 9 Replies
View Related
Apr 23, 2014
I was messing around with some Macros, as an issue came up where clients were pasting over Data Validated cells (thus removing the validation). Somehow though, the feature where you can select a cell, then pull the active cell down through the column (and then can copy, fill series, etc)has become disabled. I deleted all the macros, and turned them off in the Trust Center, but when I click on a cell the box and plus sign still won't display for me to pull the cell down the column.
View 2 Replies
View Related
Jul 6, 2014
I'm trying to compile a spread sheet that will pull the play by play logs from the NHL website.
The logs are listed in order.
Game 1 is [URL]... Game 2 is [URL]... etc etc
I am trying to put them all on one spreadsheet. (or to do it in batches of 100, or 50 or whatever the size of the file allows)
View 1 Replies
View Related
Jun 15, 2012
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
View 5 Replies
View Related
May 10, 2013
I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 Replies
View Related
Dec 13, 2013
What I want to do is pull data from columns A,B,C,D in 3 other closed workbooks (export.csv, export1.csv, & export2.csv) to my main workbook (Thunder.xlsm)and append that data in columns A-D on my main workbook. In addition I created a list of 10 names (but need to expand or delete from this list as personnel change) in Column O that I would like to filter the data in A-D. The names in the list must find the data I want to keep in column D, the rest I want to delete (not the entire row, just A-D for that particular row that does not match the criteria in column O, and shift those cells up).
I've attached a sample spreadsheet that will clarify what I am asking. I'm preferably asking for 2 macro's, one for the pull of data, and the other for the filtering.
Column A
Column B
Column C
Column D
[Code]....
View 1 Replies
View Related
Jun 29, 2007
What I am looking to do is create a Dos.bat file to be run in the middle of the night that opens Excel. From there I will need Excel to open a .txt file from a specific folder, format the file, then re-save as an .xls file.
Each of the .txt files in the specific folder is named like the following:
BCKLOG_062807
BCKLOG_062707
and a new file is being generated to the folder each night (with the new date in the filename).
Is there a way I can use the macro to loop through only the new files being placed in the folder, since the old files will already have their .xls counterpart saved ???
If this is not a clear enough description, please let me know and I will attempt to explain better.
View 3 Replies
View Related
