How To Remove Filter On Table Without Removing Little Arrows
Mar 17, 2014Tables and filters. I was using the following code to check for filters on a sheet of data and then show all data.
[Code]....
ADVERTISEMENT
Removing Arrows In Filtered Table?
May 25, 2014I have a table A-AP 4-499 (row 4 being the column headers and 5 being the first row of data).
I'd like to remove some of the filter drop-down arrows as they aren't needed for some column headers and they also look unsightly.
This code works to remove all of the arrows:
Sub HideArrows()
Dim c As Range
Dim i As Integer
i = Cells(1, 1).End(xlToRight).Column
Application.ScreenUpdating = False
For Each c In Range(Cells(1, 1), Cells(1, i))
c.AutoFilter Field:=c.Column, visibledropdown:=False
Next
Application.ScreenUpdating = True
End Sub
However, I want to only remove arrows in the following column headers: A, G, I, J, K, M, N, O, P. I want to keep the rest.
Remove Filter Arrows In Some Column Heading Cells?
May 2, 2014I have a table with a filter applied. I don't want all of the column headers to be filtered because the data in those column is not suitable filter criteria. Is there anyway I can remove the individual arrows on the right hand side of the cells in question?
View 6 Replies View RelatedRemoving Auto-filter Criterion
Feb 29, 2008Is it possible to remove autofilter criteria found in the drop down menus automatically created by autofilter?
View 9 Replies View RelatedRemove Characters From A Social Security Number Without Removing The Zero's In The Front
Apr 14, 2009I need to know how to remove characters from the date field in Excel.
Example:
9/12/1975 - I need it to read 09121975.
I also need to know how to remove characters from a social security number without removing the zero's in the front.
Example:
012-34-5678 - I need 012345678.
Excel 2010 :: Filter To Select Records - Removing Unwanted Blank Cells
Jul 25, 2013I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
View 1 Replies View RelatedApply A Filter In A Pivot Table And Extract Results In A Table
Jul 24, 2008I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedLook At Column In Table Remove Duplicates And Sort To Another Table
Mar 19, 2014I have a list of parts in a table. I am manually copy/pasting this list to another sheet in my workbook and then using DATA→Remove Duplicates to get a shortened list. Is there a way to automate this process?
In the attached workbook I want the yellow cells to auto-fill for me.
I get a lot of lists in the format on the left hand side so I want excel to automatically format them for me so that I can use the output on the right.
List Sorting Help.xlsx‎
Advanced Filter Help To Remove Header
Jan 23, 2008Sub filtertest()
Range("C17:L33").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _
Range("C13:C14"), CopyToRange:=Sheets("Combined Summary").Range("B7")
End Sub
This works fine - it filters the data in C17:L33 on the source sheet and then copies it to the combined summary (beginning in cell B7) but when it copies the data it also copies the header row - i only want to the data to be copied? - how can i amend the above??
Also - there will be a few tables i'll be amending the above code to work on as i'll be pulling them into 1 summary - how can i amend the B7 section so that they paste into the next free row - because at present they will just past over one another?.........
Excel 2007 :: Filter To Remove Value In Pivot
Apr 12, 2012I have a pivot in excel 2007 but I have the following problem; I want to exclude values from one variable that have a value lower than zero or blanks:
Month #AVG Employees
Jan 200
Feb 171
But the problem is, if i filter on the variable by placing it in the Report filter (select multiple items to remove blanks and -999), when i refresh the pivot next time for the new month it won't add the new values for the next month. How to have the filter so it applies the criteria but allowing new values in for the next month.
Advance Filter Isn't Working - To Remove Duplicates
Dec 6, 2006I'm having an issue where advnace filter isnt working and I need to get all of the unique entries.
I don't know if this has anything to do with it but I got some erros saying the numbers were being pu as text so I changed the cell tpe to a custom with 00000000 because the unique number I need to filter is 10 digits long.
As another alternative I would paypal some one a few bux if they can help me just compare two lists and make a report with the number of netries that show up in one list and not the other and vice versa.
Removing Data Rows From Pivot Table
Jul 12, 2012I have a workbook with a Pivot Table full of user data and security reports. The table is structured in a way that shows, numerically; each username and how man roles are assigned. I need to remove the username/row combo's that are listed as 1 or less. Obviously if I simply highlight the fields I want to delete it won't work. How would I go about removing such rows?
View 2 Replies View RelatedRemoving Blank In Row Labels (Pivot Table)
Jun 25, 2013How can I Remove the word "Blank" in Row Labels or change it as Blank or no data.
View 1 Replies View RelatedRemoving Calculated Field From Pivot Table Using VBA
Feb 5, 2014I am trying to create a dynamic pivote table that can be update using a value in a cell. I can get everything updating and working correctly except I am unable to remove the one calculated feild from my pivot table. I am able to remove all other fields without problem. Code below: (lines 13 and 14 is the code that i cant get to work)
Private Sub CommandButton1_Click()
Dim dt As String
Dim dt2 As String
On Error Resume Next
dt = Sheets("Executive Summery").Range("M1")
dt2 = dt & "2"
[Code]....
Removing Data Fields With Vba In Pivot Table
Feb 1, 2010I have written code to add datafiels to pivot table but I need to remove the ones that are their prior to adding.
Does anyone have a technique using vba to do this.
Remove Duplicates :: Advanced Filter, Unique Records Only
Jan 14, 2010I'm having a problem deleting duplicates from list in excel. I’ve attached a sample. I’ve tried the following:
1-Advanced Filter, Unique Records Only
2-Remove Duplicates function in Excel 07.
3-Pivot Table
4-Colour Conditional Formatting, sorting by colour
5-B2=IF(A2=A3,”Dup”,”Not-Dup”). The entire column returns “Not-Dup”
6-I’ve tried to resolve using the fix shg & teylyn suggested to Hillto in this thread, but am unable to get the ‘Numeric’ Keypad to appear in the ‘Find’ Function.
[url]
Removing Blanks From Pivot Table Slicer Within Macro
Feb 20, 2014I created a macro to create the beginning of a pivot table- just the rows and slicers, because when I tried making a longer macro to create the entire pivot table (formatting, etc) I couldn't get the macro to work.
So I do get all the vertical rows I want, and I do get all the slicers I want. But I get blank space. I think this is because the pivot table is created from another tab, and the length of data in that tab will vary from file to file (I'm doing another 30 or so of these, all with varying amounts of data, but the same data categories).
Anyway, I get slicers, but in addition to getting the categories I want, I also get "(blank)" below the names in the slicers. Is there a way to add some code to the macro to remove the blanks so I don't get this field?
I have copied and pasted the macro below, with identifying data changed.
VBA - Advanced Filter / Find Row Items To Remove Based On Multiple Criteria
Jun 28, 2014I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
Excel 2010 :: Using Single Command Button To Apply And Remove Filter
Jan 17, 2014How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
Create Column List Out Of Table (rows And Columns) While Removing Blanks
May 26, 2014I am trying to create a straight column list that can take the rows and columns of a table, and list only the nonblank items. The formula I am using only seems to work with one column, not multiple.
Formula:
[Code] .....
File Getting Too Big Because Of Arrows Not Being Deleted
Oct 3, 2013I do a weekly report for my employer. We have our tabs conditionally formatted. We then insert the corresponding arrows to show a trend to the weekly variance. After the week is up I will delete a column and add a column to the end (making it a trended view) and move the arrows by selecting and dragging all of them into its respected week. I then go on to delete several arrows throughout the worksheet. For some reason my file continues to grow in size however I am only keeping a 12 week trend. The arrows are not deleting properly and are sitting in the background, where I cannot see them. I know this bc I did "find & Select" and chose selection pane. I was wondering how I can resolve this problem or maybe delete just certain columns of arrows (objects)? I had 61,000 arrows and shouldn't have more than a couple 1,000.
View 5 Replies View RelatedPivots - No Drop Down Arrows
Jun 8, 2007I have been sent a spreadsheet with data in it that is from a Pivot table.
The headings look like the ones in the Pivot table the only difference is
there are no drop down arrows to show/hide items
I cant click and drag fields to swap them.
So it looks like a Pivot but I cant manipulate it.
Trend Analysis With Up/Down Arrows
Oct 5, 2006I need to analyse trends between a range of cells. The idea is to display an image of a triangle pointing up if the percentage between the current month and the previous is bigger, a triangle pointing down if the percentage has decreased or a rectangle if both months are the same. I've tried to build a userform to ask the user to input the range and then analyze the data...with no luck at all.
View 9 Replies View RelatedVBA Code For Resizing Arrows To Specified Length?
Jun 7, 2013I have created this Excel schedule that is attached. The point of the schedule is to organize Jobs and Crew members. I have VBA code in, so when I calculate how long the job should take, the arrows next to the job will automatically extend. (This should all make sense if you take a look at the attachment.) The only problem is that my arrows do not extend the correct distance. In the attached file I have scheduled "James Lorenz" to do a job starting on tuesday, towards the bottom of the page I did my calculation that figures he should be on that job for 9.5 days. I would like the Arrow next to James' job to extend 9.5 days on the calender instead of 9.5 centimeters or whatever it is doing now.
View 9 Replies View RelatedVBA Autoshape Arrows To Show Performance
Oct 2, 2008Morning all. I'm trying to use VBA to generate autoshape arrows to track changes in values.
Something allong the lines of Column B (Jans data) C (Febs Data) E (autoshape arrow, green up, for improvement, or red downwards for a worsening).
The problem I'm having is postioning my autoshapes. The only way I can do it at present is to keep all columns and rows a standard width, and position using multiples of those.
Is there anyway to set the autoshape to the cell height and width, and position it within the boundries of the cell? This way I don't have to worry about rewiting my code every time I change a cell width?
Validation Lists And Drop Down Arrows
Aug 26, 2006From the Excel Toolbar - Data/Validation - I'm successfully using a validation list [drop down arrow] to be able to choose from a list and have whatever value I choose entered into the cell. So far so good. Everything working fine.
Here's the thing though, the list I'm referencing is a column with 50 rows. Sometimes there are many items in the column - up to 50, and sometimes only 3 items depending on other variables in the spreadsheet.
Because the list is referencing the entire 50 rows in the column (only way I know how to do it), during times when the column has only 3 items (3 rows), the drop down still shows a bunch of blank spaces (like 47 of them - tons of white space with a scroll bar window that runs down beyond where one can see), which is awkward (strange looking).
How do I program the validation list to only show as many cells within a range that have actual values within the cell, or where <> "" ? Or, in other words, to leave all blank spaces found in the list = NOT SHOWN.
VB Code For Hiding Autofilter Arrows
Jul 25, 2008I found this code for hiding an autofilter arrow for column 2. I would also like to hide the arrows for columns 35 through 50. Does anybody know how to do that? Thanks.
Private Sub Workbook_Open()
'hides all arrows except column 2
Dim c As Range
Dim i As Integer
i = Cells(1, 1).End(xlToRight).Column
Application.ScreenUpdating = False
For Each c In Range(Cells(1, 1), Cells(1, i))
If c.Column 25 Then
c.AutoFilter Field:=c.Column, _
Visibledropdown:=False
End If
Next
Application.ScreenUpdating = True
End Sub
How To Make Different Colour Arrows Appear Based On Set Criteria
Jul 24, 2014I am trying to make different colour arrows appear based on a set criteria, I am having issues with the hide/show amber part, it doesn't seem to be doing the "AND" part.
'Hide/Shows Green'
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1").Value >= 0 Then
ActiveSheet.Shapes("Arrow1").Visible = False
Else
ActiveSheet.Shapes("Arrow1").Visible = True
End If
'Hide/show Red'
If Range("A1").Value = 0 And Range("A1").Value
Odd One, Up And Down Arrows Stop Working When Sheet Protected
Jan 10, 2008The sheet was working fine, then all of a sudden (i dont know what i have done) the up and down arrows (on my kayboard) wont work when the sheet is protected, when i unprotect the sheet they work fine, i can use left and right. i have checked the scroll lock isnt pressed/illuminated on my keyboard.
Creating Arrows Based On Range Values
Sep 22, 2006I'm trying to create a VBA macro that will compare two worksheets. If an item has "moved" then I want to draw an arrow on the new worksheet of where (the cell range) it was on the previous worksheet, to where it is now. Using Record Macro, I've noticed the coding looks like: ActiveSheet.Shapes.AddLine(276#, 60.75, 309.75, 60.75).Select
How do I make sense of these numerical values? Is there a way to input cell ranges? Is there anything besides drawing arrows I can represent this phyiscally? (as opposed to with values)