How To Use Macro To Replace Specific Rows

Sep 26, 2011

Using Macro, I want to replace the height of odd rows like row 1 , row 3, row 5, etc without making any replacement to even rows.

View 4 Replies


ADVERTISEMENT

Find And Replace Macro Based On Specific Cells

Sep 12, 2009

After much fretting over this (and many other Excel issues), I've decided to seek out some assistance. I've included an example with columns, because I'm not very fluent in Excel terminology.

View 5 Replies View Related

Macro To Find Replace Specific Text In Multiple Sheet Names

Sep 13, 2010

I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.

View 9 Replies View Related

Macro To Replace Cells And Subsequent Rows

Apr 22, 2007

I have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.

Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".

In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).

View 9 Replies View Related

Replace Specific Numbers With Specific Text

Mar 13, 2008

Is there a way to make a macro convert '1' to Yes and '0' to No? I have 2 columns (F and G) in a worksheet that contain the value of 1 or 0, but I need to convert them to Yes or No. I have tried some fo the samples but they pop up a msgbox which is not required.

View 2 Replies View Related

Macro To Look For A Specific Word And Delete Rows

Jan 27, 2009

I need to build a macro which will look for a specific word say :"ABC" in a particular column say "B" and delete 5 rows including the row containing the word "ABC"

View 6 Replies View Related

Macro - How To Delete Rows With Specific Criteria

May 21, 2012

I was searching for a macro to delete rows that obey a specific criteria. I downloaded [URL]..... and copied the Loop Example to my WorkBook.

When using Mr. de Bruin example, it worked perfectly, it did really delete the rows that obeyed my ">2" criteria. Although, when using on my workbook, the macro deleted the values, not the entire rows. Here's what's happening:

I would like to delete rows, not only values.

Code:

'The code below will delete every row in the usedrange with "ron" in the A column.
'If .Value = "ron" Then .EntireRow.Delete
'
'I use the A column in my example, change the A to your column in this code line.
'With .Cells(Lrow, "A")
'
'Change ron and the A to your search word and column before you try the macro.
'See the examples on the worksheet if you want to do something different.
Sub Loop_Example()
Dim Firstrow As Long

[Code]....

View 2 Replies View Related

Macro To Delete Specific Range Of Rows

Jul 12, 2014

I currently had to start from scratch as my formula kept raising the debug screen. I know the answer is simple but I cant figure out what it is. I have column A, rows 9 through 1000 with data. I want to delete the entire row of any "x" value present in column A rows 9 through 1000. I am new to VBA. So simple is good.

View 2 Replies View Related

Macro To Auto Hide Rows In Specific Range

Jun 10, 2014

I have the following macro to autohide some rows with no data, however its remove rows starting from column A.

[Code] .....

How do i fix this to only hide the rows in the range (H4:V50)?

View 5 Replies View Related

Macro To Copy Data From Specific Columns And Rows To New Worksheet?

Apr 29, 2014

What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.

Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.

Requirements:

1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.

2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1

3) When column is found, data from row 23 column (x) will be copied to sheet macro1

4) repeat requirement 3 till no more Scenario's

View 14 Replies View Related

Macro To Copy Rows Containing Specific Blank Cells To Another Workbook

Jan 30, 2013

I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.

If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.

View 2 Replies View Related

Macro - To Delete Whole Rows After We 'control' Find Something From A Specific Column

Aug 26, 2008

I am not the best at this, but we recorded a macro and we want to delete whole rows after we 'control' find something from a specific column. WHen we recorded our macro, it finds the first instance and we hightlight the whole row and 'control' 'shift' 'end' and delete all of the rows. We did this because we sorted and made sure the information we wanted to delete was at the bottom of the worksheet. we realized that each day the spreadsheet we pull from an ip address gets bigger and the row that we started from to delete starts on a different row each day. How do we get all the information to delete everyday, even when the row that Owned starts on changes? ...

View 9 Replies View Related

Macro To Copy/paste Specific Rows (and Formulas) Based On Drop Down

Sep 8, 2009

I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.

At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.

Is there any easy copy/paste macro for such a thing?

View 9 Replies View Related

Search Specific ID - Sum And Replace

Jul 21, 2012

I have a Master work sheet consisting sale data of more than 400 Sales person for a period of 6 Months.

The Employee Codes are entered in column "F" starting from F6, F7, F8 and so on....

G5,H5, I5, J5, K5, L5 to GV5 has the product names.

G5,H5, I5, J5, K5, L5 to GV5 has the qty of product sold by that concern sales person.

Since each sales person's occurrence is 6 times in the master sheet, I would like to have a code to search each and every sales person by their employee ID through out the entire master sheet, sum each product they sold as per the product name and get it entered in their concern cells.

View 2 Replies View Related

Replace Date With Value From Specific Cell

Feb 28, 2014

If a cell has a date in it (date payment received) I would like to replace it with the value of the payment received that is given in a different cell - how do I do it ?

View 2 Replies View Related

Search And Replace Specific Character?

Jun 1, 2012

In a cell(s) I have for example {text}dd%2BMore_Text}

what i want to do is search and replace the final }

so it should be {text}dd%2BMore_Text

the regular search and replace in excel removes all } which is not what i need.

View 6 Replies View Related

Replace Specific Character ONLY If Its LAST In The Sheet

Nov 27, 2013

Switched to Excel after using OpenOffice and I'm stuck on knowing what an old a 'find and replace' formula would be in Excel. It would remove a specific character (or word) ONLY if it was the last characters in a cell.

The old find and replace for open office:
Find: (.*)/$
Replace: $1

It's not that important now to delete a word, mainly the last slash '/' ONLY if it's the last character e.g. this data has 2 rows with a '/' as the last character

website.com/page
website.com/page/
website.com/page/page/

Running my old find and replace formula would remove the last slashes, but leave the others

website.com/page
website.com/page
website.com/page/page

Need simple replacement to the find and replace but a formula is also right.

View 2 Replies View Related

Replace Values Between Specific Characters

Nov 29, 2009

I have been trying to do the following but have not been successful. thanks in advance for helping!

- i have lots of text strings on one worksheet

- some text strings have <randomstring>, some even have multiple instances of <randomstring>, but others don't have a <randomstring> at all

- what i want is remove anything within "<" and ">", including the operators "<" and ">"

i have done this so far, with simple text functions, have each of the following lines in separate columns (text string column is "C"): .....

View 10 Replies View Related

Using VBA To Replace Data In A Specific Cell

Apr 26, 2006

I have a spreadsheet, where I am measuring dimensions for a cpk test. My question is, can I use vba to format the calculated cpk cell so that if it falls below a certain value it replaces that value with whatever I have specified in vba? Was wondering is this is possible.

View 5 Replies View Related

Search For Specific Text In A String And Replace

Dec 3, 2009

I have a text such as:

fdfs&s_kwcid
sfsd&s_kwcid=dfsads
&dfsdaf&dsafdsf&s_kwcid=
fdsf&dasfsdf&s_kwcid=dsfasfsdf

I want to do is search for "&s_kwcid" or anything containing "&s_kwcid" and replace it with blank. So above would then read:

fdfs
sfsd
&dfsdaf&dsafdsf
fdsf&dasfsdf

I tried =IF(SUM(COUNTIF(E2,{"&s_kwcid*"}))=1,E2,"") but it didn't work. I tried auto filtering, and using contains &s_kwcid* but it didn't filter out results, but find &s_kwcid did find results for text anywhere in string, so I know the problem is there.

View 5 Replies View Related

Looping Through Specific Worksheets - Find And Replace

Mar 7, 2013

Where i want to carry out a find and replace specific to different worksheets.

At the moment i have:

Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range

Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")

[Code] ........

Where column A contains the tab name, column B contains what to replace and column C contains the replacement.

View 8 Replies View Related

Excel 2010 :: Find And Replace Within Specific Column?

Oct 1, 2012

I have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.

The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.

For example, if I have:

Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith

I'd like the data to become:

Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith

I'm using Excel 2010 if that impacts anything.

View 1 Replies View Related

Find And Replace A Specific Letter/number Combination

Jul 9, 2008

I have a column of references I wish to standardize. Contained within a general text description there is also an order-specific reference number, which is not relevant for my purposes. I wish to find all of these numbers and replace them with nothing (i.e. retain the rest of the description).

The reference numbers are always in the format "P#####/##". Unfortunately these references are in the middle of the text field, not at the start or end, so I can't use a LEFT or RIGHT formula to delete them.

Once these reference numbers have been deleted I will then be able to filter for unique records only. When I do this at the moment the filtering has no effect due to these specific reference numbers.

View 9 Replies View Related

Search Across Columns By Row & Replace Specific Cell Contents

May 2, 2008

I have created a desk planning spreadsheet in excel. Each week a mailmerge sends out an email to everyone in the office asking them to confirm when they will need a desk in the next week.

As the normal employee doesnt get involved in desk planning I want them simply to state whether they will be in the building or not by entering "GH" (our building) in a cell under each day in the email they get sent.

When the reply comes in we select the cells from the email and then paste them into the desk planning spreadsheet.
-----

WHAT I NEED TO DO:
Select some cells (must be in the same row - that we have just pasted in).
Press a button on the Worksheet labelled "Auto Assign Desk", which does this:-
For each cell that contains "GH", replace with the right-most cell to the left of the selection that starts "GH_"... (this is the start of a unique desk reference (GH_1_1, GH_1_2,etc.)
-----

This will assign the employee to the desk they were sat at last, when they are in the office next week.

View 7 Replies View Related

Delete Rows With Specific Characters In A Specific Column

Dec 10, 2007

Currently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):

Find_Range("A", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("B", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("C", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("D", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("E", Columns("J"), MatchCase:=True).EntireRow.Delete

although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:

Range("1:65536").Select
For Each cl In Range("J:J")
If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then
Rows(cl.Row).Delete
End If
Next

but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...

View 5 Replies View Related

Macro Loop To Extract Specific Values And Min/Max Values From Column/Rows Range

Jun 3, 2009

Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.

There's 2 main events in this loop (I hope that's the correct terminology):

Input 1) User defines the beginning cell to start the loop. In this case, A2.

Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......

View 13 Replies View Related

Macro To Only Show Rows That Contain Specific Text/Chinese Text Issue In Visual Basic ( 2007)

Jun 23, 2009

I want to create 3 command buttons (active X) on a worksheet to toggle between showing rows which only contain the below text in column L (range L9:L30) and showing all rows containg the options (However, I also have some blank rows in this range and i always want them to remain hidden.)

My text options are:

High ‚
Medium ՠҪ
Low ’α

The text arrives in the cells via a VLOOKUP

Is the chinese text a problem? i can't type it into VB.

I've been using the following macro to hide and unhide rows with a command button in the same sheet:

Private Sub CommandButton1_Click()
Toggle_Hide_Unhide
End Sub

Sub Toggle_Hide_Unhide()
Dim rngCell As Range
Dim TakeAction As Boolean

If ActiveSheet.CommandButton1.Caption = "Hide" Then
TakeAction = True
ActiveSheet.CommandButton1.Caption = "UnHide"
Else
TakeAction = False
ActiveSheet.CommandButton1.Caption = "Hide"
End If

For Each rngCell In ActiveSheet.Range("I9:I30")
With rngCell
If .Value = 2 Then .EntireRow.Hidden = TakeAction
End With
Next rngCell
End Sub

View 9 Replies View Related

Macro To Copy Specific Cells From Row From Source &amp; Stop When Next Row Cell = Specific Value

Nov 7, 2008

I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)

After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.

Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.

Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select

View 9 Replies View Related

Compare Rows On 2 Sheets And Replace

Mar 2, 2007

I'm trying to do is compare 4 columns on 2 sheets. I would like to go down in column "E" on sheet1 and find the exact one on column "A" on sheet2. Once these are equal I would compare F, G, H, on sheet1 with B, C, D on sheet2. If the these three columns are not the same I would like to copy from sheet2 B, C, D from sheet2 to F, G, H.

The problem I have is none of the rows of information will be in sequential order as well as we may not have a match. What I'm saying is row1 on sheet1 could be row1000 on sheet2. Attached is a small example. in the example rows 6, 11, 12, 16 and 19 would be the only changes on sheet1. My example does have the rows in sequential but that would almost never be the case for me....

View 9 Replies View Related

Finding Rows With Specific Characters - Copy Only Those Rows

Apr 7, 2012

I'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved