I have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.
Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".
In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).
I'm trying to find a way of filling in a "form" on sheet1 and for that information to populate into the next empty row on sheet2. This would then give me a table of information in sheet2 generated from multiple entries into sheet1.
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp() ' ' EmployeeExp Macro ' Macro recorded 12/02/2008 by eugene.cross ' Dim i As Integer Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I have a spreadsheet that has "Branch" Information starting below the heading in Cell C6.
I want to associate the information in the subsequent cells to a corresponding Sector that will be populated in column B6 onwards.
Example:
If the cell Cx has IMTB in it, then cell Bx will be Ops.
There are 6 Main Sectors - (CS, CSM, DM, CBSA, OPS, SPP) that need to be populated into Column B based upon one of the multiple possible Branches that are in Column C. the branch will fall under any ONE of the Sectors.
Essentially, I need to run a loop through, while statement, or something that will generate a true or a false for the entire column and then populate the empty column.
I have a excel which contains 5 columns in which 5th column data cells has to be replaced with another set of data which have relationship with other 4 columns data.
In cell M32 there will either be an O or the cell will be blank. In cell T51 I had placed an IF statment like this:
=IF(M32="O","","X")
Now that works ok but there is a glitch on my part. If T51 is blank because of M32 containing an "O" then the user will also enter a number into T51. Because I was using an IF formula in the cell it gets overwritten because of the user needing to enter data in the cell because of M32 containing a O. How do I write a macro so that a similar formula is used but still able to enter data manually without overwritting the formula?
This worksheet has around 40,000 records, and I need to create a Macro that will ask the user for a date, and when the user enters a date the macro goes through column A and finds all of the matching dates and then replaces the numbers (along with the formulas) in the corresponding Add Returns cells (column E) with 0's.
I have only been able to create an inputbox, but I am completely lost regarding the criteria due to being very new to VBA.
Sub ClearData() Dim EnterDate As Date Dim msg As String
I am trying to create a function that will evaluate a cell, lets call it B10, and depending on this numeric entry input data in cell ranges B14,B22.
What I am trying to do is create a list of locations for a packing slip that when I enter the corresponding location number (i.e. 200) that it will populate the shipping address in B14,B22.
After much fretting over this (and many other Excel issues), I've decided to seek out some assistance. I've included an example with columns, because I'm not very fluent in Excel terminology.
So I was given the task to translate some procedure instructions in an Excel file from English to Spanish. These are very simple instructions and in most cases repetitive throughout the document. There are a lot of instances where the instructions are the same except for a #. They are meant to be modified within the cell as the text that appears in the cell will be printed exactly as it appears.There are several instructions in the cell, it is basically a long continuous string in the cell. My idea is to create a macro that can search that range of cells for the instruction, replace it with the Spanish equivalent while leaving the original English instruction in the cell.
I have a single-column list. The column header is 'ID'... records within this column repeat sometimes (this is ok). I need a worksheet function that will allow me to mark the second, third, or fourth duplicate, but leave the first duplicate alone or unmarked. I have searched the Web and this forum, and came up empty. If this cannot be done with a worksheet function, then VBA is welcome. No ColorIndex.
I am building simple worksheets that consist of weekly time sheets. In cell B7 is the week ending date for that week. When I copy the worksheet onto a new worksheet, I want B7 of the new worksheet to be the week ending date 7 days later.
I have a table similar to the table on the left, and I need to convert it to something like what is on the right. Ultimately I will concatenate the numbers in the table on the right too with commas between, so if for some reason it's easier to go straight to that, that's an option.
So in the example below, states will be listed multiple times with a unique number next to it each time. The state may be listed up to say ten times or as little as one. Each time it is listed, it will have a different number next to it. I need to reformat this into one where each state is only listed once, and each possible number is next to it in one row.
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.
I have a program that uses the Document Open event to display a custom form. This program is being used on about 50 computers for the past 8 years with no problems. One user has a problem now. They can open the program once and the code fires. But when the user tries to open the same file a second time, the "Microsoft Excel has encountered a problem and needs to close" dialog box is displayed. The document that is recovered has no vba modules and no code in the Document open event. I've uninstalled and reinstalled Office Professional. Shut down all firewalls.
So I'm trying to create a macro that will simplify dealing with a file we receive at work pretty often. I've enclosed a spreadsheet that shows a very basic example of the files we receive. What I need to happen is this: On the rows that have only the Company # in column A and Total $ in column D (ie. rows 5 and 6), I need the Total $ amount moved up one row and then for the row it was previously in to be deleted (at that point that row should only have the Company $ and no other data in it so it's basically useless). The problem I'm having is that if any rows are added to the file (for instance if an row was added between rows four and five) it would throw off my macro.
Why does my macro mess up on second line C23 and not places Play Equipment or the amount in the right column it stays on row C22
[URL]....
Code:
Private Sub CommandButton1_Click() Dim SheetName As String SheetName = "Estimate1" SheetName = InputBox("enter the name of a sheet to use", "sheet name", SheetName)
I need a macro to delete each row in which all cells contain the same value, always starting in cell G2 and going out an indefinite number of cell's. So, for one run, the range could be G2:BU2 and another it could be G2:PW2. Also, the number of row's is indefinite.
And an added complexity: I need it to ignore the cell in this search process if the cell contains "NC" - so if all the data in the row is the same except for a few that say NC - then it gets deleted. If the any of the cells in the row have other values, then that row does not get deleted - even if it contains "NC".
