I'm trying to create a hyperlink inside one workbook from sheet1 to sheet2. The main requirement is that I can copy the formula down and it changes accordingly the hyperlink name cell reference as well as the hyperlink destination. I'm only able to achieve a changing hyperlink name.
I found the following Formula to be useful but I can't seem to change the "B5" as it either handles the cell like text or as a reference of the current sheet.
If I try to leave it without the "" Excel tries to get the value of sheet1 b5 and if I use the Address function the Address input numbers don't change either when I copy them down.
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range
On Error GoTo mEnd Set rng = Sheets("Log").[F14:F10000] If Not Intersect(rng, Target) Is Nothing Then If Target = "" Then With Sheets("Log")
Say cell C5 contains the name of a project (workbook). eg
C5 = "[Project1]"
In my current workbook, I want to find the value in cell B8 of Sheet1 of the project shown in C5. If I wrote this directly, it would be "='[Project]Sheet1'!B8" But the name of the project is a variable shown in cell C5 (as explained above). So I need a formula that will find the value in cell B8 of sheet1 of the project shown in C5.
I want this to link to Work_Log!.Cells(b,1), however instead of grabbing the specific cell, it is pulling the contents of the cell and creating a URL of that. For instance if b = 1 and cell A1 contains the value "yellow" then this code is giving me the hyperlink to WorkLog!Yellow when I want it to read WorkLog!A1
I suspect there's a simple answer to this but I've looked and can't find it: In Excel 2003, when I add a hyperlink to another file and close/reopen my workbook, the link is saved as relative to the current workbook. So if the main workbook is moved or, in my case, when I use VBA to copy and email the sheet with the hyperlinks, the links are broken.
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
Could someone show me an alternate way of using/writing this code instead of using RC references to the Sheet1. I am trying to select ranges that dynamically change according to the range of data in the next column. This is the code I have but it is static in the range it chooses.
i make a lot of "trending" files at work where i link a cell to a seperate workbook where all workbooks are in the same folder.
these workbooks all have the same name with the date at the end
example: workbook 06-01-2011 workbook 06-02-2011 all the way to workbook 12-31-2011
usually i use find replace to change the date one at a time, but doing that 365 (x how many cells i have referencing) times is redundant
i have seein INDIRECT of the cell changes but nothing for the workbook name chaning
here is what i am trying to do: ='C:File Path[WorkbookX.xls]Sheet1'!A1 where the X WorkbookX is variable (the date at end of file name)
i have a list of all workbook names or just the dates and would like to do something like:
=D1&$A$1 where D1 is the full path name or ='C:File Path[Workbook"D1".xls]Sheet1'!A1 where D1 is the date name
using excel 07 i prefer not to use a macro for how i am doing this but if a macro is the only way then i cannot have it actually open the files to pull the data. i prefer no macro since i set it up for future dates so when the new file is created it automatically updates the reference.
my end result i usually have something like A1=referenced cell from first workbook, A2= cell from 2nd book, etc. sometimes B1 would = a different cell from first workbook and so on if i am trending multiple cells from the workbooks
I have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit Const Startingrow = 11 'Data starts on row ## Const AlarmDelay = 183 'send warning Sub CheckTimeLeftFac() 'References needed : 'Microsoft Outlook Object Library
Dim i As Long Dim j As Long Dim msg As Long Dim Lastrow As Long Dim WhoTo As String Dim SubjectLine As String Dim MessageBody As String Dim olMail As Outlook.MailItem Dim olApp As Outlook.Application Dim strLink As String
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance: On Tab 1, A2's value is [1], K2's value is [9.38]. On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL] Second tab, store's stock: [URL]
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.
I'm using Excel 2000 and trying to use the datedif function. I've formated 2 columns as date m/dd/yyyy and left the formula column general I'm entering dates A1: 1/1/2002 B1: 1/1/2005
I'm entering the formula in C1 =datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
I want to have a standing formula in Cells J2:M2 that will always reflect whats in those cells. I don't want to use transpose nor do I wnat something as simple as J2=+B5,K2=+B6,etc.
I would like to know if there is a formula that would add the values in a certain row to a cell
For instance:
I want J2 to reflect what is in B5 AND I want K2 To reflect what is in B5 plus a row which would be the value in B6. I have a reason for doing this as I am going to import 120 ranges beginning at a1 to I30 on each sheet while having the sheet I am importing to have these formulas starting at J2.
I tried using +cellnumber+row, but it just gave me the row number and not the actual value in that cell.
At the beginning of a loop, my cursor is positioned on a row. I want to test two cells on that row.
Depending upon the result of the two cells, I want to make the row a certain color.
After that, I then want to move down to the next row, test the same two cells in THAT row, color accordingly and loop again until I reach the bottom of the spreadsheet.
My problem is this: If I can use a loop that lists various conditions, along with the corresponding statements that color the row accordingly, how can I when finished increment the cell references so that the conditions change to refer to the cells the next row down?
If a loop is not possible, any suggestions you have for solving this problem would be appreciated. I have about 200 rows so am trying to condense my code; this may be hampering my ability to figure out the solution.
I am trying to code the following in VBA. Excel Cells have formulae like: '=+BZ165-BZ163-BZ162-BZ160-BZ159-BZ157-BZ153'. Now I want to write code in VBA which will be able to give me the individual cells referenced in this formula: BZ165, BZ163 etc. These names can be stored in individual variables or arrays. I will then use these for further processing. Note in cases where formula refers to data in another sheet like: '=Projects!P49' or data in another excel like '='C:Documents and SettingshoskopDesktop[Annual.xls]Quarterly'!BA$502': I would like to store the path , file name and sheetname in variables/arrays as well. Any pointers as to how I should approach this problem?
Lets say I have two sheets titled "dashboard" and "raw data" in a workbook. Cell A1 in "dashboard" should always show the most up to date data from Row 1 in "Raw Data".
I update "raw data" daily, adding a new column to Row 1. For example December 19 would be A1, December 20 would be B1, December 21 would be C1 etc...How can cell A1 in "Dashboard" always reference the newest cell in Row 1 of "raw data"?
I would like to reference cells in another tab in my worksheet, but change the orientation.
For example, in Tab 2, I want to make rows A1:A26 equal to columns A1:Z1. Do I have to click back and forth between worksheets 26 times, or is there a way around this?
I have a macro that cleans up data on one sheet, text-to-columns, flip rows of data, etc. Another sheet references the cells AFTER the data has been cleaned up. However, I can't put the cell references in from Sheet1 to Sheet2 before I run the macro because it breaks the references.
Just a simple example, Suppose cell A1 contains the formula: =Sheet2!B5. If I go to Sheet2 and run the macro to clean up the data, when I got back to Sheet1, cell A1 contains: =Sheet2!#REF!
The idea is that this is a template, and the user can input aggregate data, run the macro to clean it up, and then go to the other sheet. I can easily create the macro to add copy/paste between the two sheets, but I'm looking for a cleaner way to do this.
I'm having problems with the MATCH function. If I use =MATCH(A2,'c:myfile.xlsx'!MyRange,0), it works. A2 is the value that I want to look up. 'c:myfile.xlsx'!MyRange is the full path of a range in an another XLSX.
However, if I assign the file name to a cell and try: =MATCH(A2,A3,0). where A3 has the exact same path as the line that work, Excel returns #N/A. I also tried a match on a range in the same tab of the same spreadsheet, and it didn't work. Is it possible to do what I'm trying to do? The file location of the external XLSX is going to change, and I wish I could just update one cell rather than every single cell that contains a MATCH.
