I'd like a macro that cycles down 50000 rows of column B. If it comes across a blank cell it will import the value from its adjacent cell in column A. then the macro will move onto the next cell.
View 9 Replieshow to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View RelatedI am looking for a piece of code that I can use.
Basically if cell A2 is non blank then I want cell C2 to display My Text. I want to do this for every cell down to about A250.
I have a formula in my spreadsheet that shows dates for servicing of products. Column F show's Date Last Serviced and the adjacent column (G) then shows Date Next Service. When there is nothing on the F column's cell then the date that appears on my spreadsheet is 31/12/00. It looks messy and I would rather have a formula to make it so that if the F column is blank, then the adjacent cell in G column should stay blank also.
To automatically calculate the next service due date, I have variants of this formula that creates the dates in G column:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))
I tried adding as an extra part, for example:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))&If(F4 = 0, "", F4)
It always brings back the answer of 366, and does not make the cell blank...
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View RelatedI'm trying every conceivable angle I can think of in vba and coming up empty. What I have is a spreadsheet similar to this:
Column A Column B
1. 1234567
2. 2345678
3. 3456789
4. 4567890 A0001
5.
6. 9876543
7. 9876543
8. 9876543
9. 1234578
10. 3456789 A0002
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.
Ok, I've come close to the solution using the Match function, but somehow just can't quite nail it.
What I need is a formula that will search down Column B until it finds the first blank cell. Then report what is directly to the left of that cell.
So If the first blank cell is in $B$5, it will report what is in $A$5.
If a cell in collumn B is blank, I want to cut text from column C at the same row and paste to column B.
View 4 Replies View RelatedIm wondering if this can be done in excel..
2 columns
if the value in column O=$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%
this is the way I was trying to do this...
=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)
I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
Have 2 columns of data
Need to read the cell value of column A that corresponds to the MAX in column B. Trying to use OFFSET to read the col to the left but will not work.
Example of table and expected result
A B
1 1
2 1
3 2
4 6
5 3 Result = 4
I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
Example:
Order#1; Model1; Serial1, Serial2, Serial3
Needs to become:
Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3
I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:
1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.
2. Set Cell "A2"'s value = 1 --> I have already coded this portion.
3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.
4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.
5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............
I have two columns,
Name
Marks
Amit
45
Ankit
54
Aditya
Arun
Ayush
43
Amar
Akas
32
Akshay
21
I want to extract first data from column Name where in the data corresponding to it in Column Marks is blank, and if that is filled, i want the next data to be shown automatically
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
View 3 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
This should be simple but this is not working like I want it too. It should change the value in the cell adjacent to the cell in column B if the value of the cell in column B = "X".
Dim Well As Range
For Each Well In Range("B:B")
If Well.Value = "A2" Then Cells(Well, Well - 1).Value = "SamplePlate2"
Next Well
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI am trying to sum 3 non-adjacent cells. Some cells are blank, not always in the same row / column, and all are the result of vlookups. I tried: E = I+M+Q, but the result is #value!
-In column E (respectively F, G, H) that's where I want the result of the sum
-In column I (respectively, J, K, L), depending on the row, some cells are blank and some cells contain a number. That's the first term of my sum.
-In column M (respectively N, O, P), I have also blank and non-blank cells, depending on the row. This is the second term of my sum.
-In column Q (respectively R, S, T), also blank or non-blank cells. This is the third term of my sum.
I will need to extend this formula to F=J+N+R, G=K+O+S, H=L+P+T, and probably also a sum with 4 terms where E=I+M+Q+U etc.
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
I have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;
=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))
I've got six columns with drop-down lists in every cell. I don't want column six to be selectable if the first five drop downs don't have data in them too.
Equally, I want the data in column six to be undone if columnns 1-5 are then unselected. Can I do this?
I know that using data validation or VBA is an option but I'm not sure exactly how to set it up this way. I also don't want anyone screwing with what can and can't be entered according to these rules - I want to keep it watertight!
I would like a macro that deletes rows based on having two blank cells in adjacent columns. I have achieved this with the following code however i need it to only delete rows below a certain row. How would i achieve this?
Sub DeleteBlankARows()
Dim r As Long
For r = Cells(Rows.Count, 30).End(xlUp).Row To 1 Step -1
If Cells(r, 3) = "" And Cells(r, 4) = "" Then Rows(r).Delete
Next r
End Sub
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I have a log that I regularly use to import text files, after each text file import it leaves a large number of rows blank that I have to delete before I add in the next text file import.
Any VBA method to detect this and remove the blank rows so that I dont have to keep checking to remove?
After doing some searching I found a macro here which imports multiple text files into one workbook, keeping each text file as a seperate worksheet, each worksheet named the same as the original file name (minus the .txt extension).
However, it adds a blank line between each line of text. So I get this:
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
instead of this:........
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
This doesn't happen when I use the import wizard, or when I just open the file from the File -> Open menu.
My text files are always the same format (number of lines, etc.), so it's easy to delimit and insert forumlae as needed, but those extra lines are breaking a macro I've previously written to parse the data.