IF Date Is Between 2 Dates Then Output Additional Column?
Mar 25, 2013
I'm having where basically I've got the below scenario on a spreadsheet:
Start Date - 14/03/2013 (Cell A2)
I want to look up this date against a 52 week structure to see where it is in our "working calendar year". I've got a table which has the following fields:
This table follows the same format for all 52 weeks.
Now in this example "Start Date" falls between the "Week Start" and "Week End" date so I want to output Week 1 in cell B2. However I could have a "Start Date" of 29/03/2013 that falls in week 3 of the working calendar.
I am using a spreadsheet as a score sheet for a competition. One of the columns is the student's GPA. After entering all the scores there are duplicate final scores. I need a way to have it look at the final score and then use the GPA so that it will not put a duplicate value in the final column.
al Column N is the Total Column, Column O has the Names that correspond to the Total Column. Currently I am taking this total and putting it into Column Q (High Scores) in high to low order. Column R should have the names that match the scores. But with duplicate scores, it is only putting the first name associated with the score. I would like to use the GPA as a final determining factor for the duplicate scores. The higher GPA would come before a lower GPA. I have tried to put an additional column to bring the GPA over to correspond with the High Scores Column, but could not get it to work.There are actually more names for the competition and the top 10 will be moved to a different sheet and further judged. I have attached a sample with the exact formulas that I am using.
I need a 'simple' vba that outputs all the dates in a range that correspond to a particular ID in a column as well as that same ID in a column beside the dates.
So basically using the data in columns A to B as input, to get columns E and F as output.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009 If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5 Date Time In Time Out Hours Worked Pay 01/03/2000 01/04/2000 01/05/2000 . . 11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row. To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have a column of dates listed at the bottom of this post. I am looking to have a formula in a cell that gives me the earliest date from the column. I have tried Min() and Small() with no success. Is it perhaps the "AM" and "PM" that is throwing things off? A small example of the data:
11/21/2008 AM11/09/2008 AM11/09/2008 PM11/09/2008 PM11/10/2008 PM11/11/2008 AM11/11/2008 AM and it should return 11/09/2008. Thanks in advance any and all. Ed
I have developed a user form in VBA which is used for entry into an excel worksheet. From this data, I need to do the following:
1) Create 2 output files for Job data entitled "J" and another file entitled "S". The "J" and "S" is captured in a field in the data. I need to hit a button that allows these 2 output files to be produced, so I need to 'loop' through rows of the data to do this/
2) In addition to 1), the user needs to be able to 'select' the date range they would like to see 'J' and 'S' data over. This will be based on a field called "Startdate'. How could I do this with the button above-can I parse an input value to a form and select the 'J' and 'S' files on this.
I am unable to change the date format in a column of dates. The cells have values that look like the following: 4/29/2013 8:59:12 AM. I want to change these to YYYY-MM-DD format, but no matter what I try the format will not change.
I have 3 columns (Name, Pass Date, Fail Date) Each name will only have 1 date in either column B or C.
I want a formula that will say "if there is a date in the pass column (B) then this name is a pass, if there is a date in the Fail column (C) then this name is a Fail"
I am trying to do a macro that looks to see if the date is different from one cell to another going down in rows. I got it to work until the cell is empty then it says the date dont match but I just want it to stop the loop. so it should go down a list check to see if the date is the same all the way down the list, stopping if cell is blank, if not give a message box, if it is the same stop.
Is As follows
Dim rowNum As Integer, colNum As Integer, currCell As Range
rowNum = ActiveCell.Row colNum = ActiveCell.Column rowNum = rowNum + 1 'get first cell Set currCell = ActiveSheet.Cells(2, 3) 'loop while cell not empty Do Until currCell.Value = " " If currCell.Value = ActiveSheet.Cells(2, 3) Then If currCell.Value = "" Then End If
the last 4 caracters are numbers. I need to test these numbers and sum the corresponding values them in a single cell without adding new column(SUMIF like).
so in the above example I need to sum all ending at 1244 or 1519, therefore the sum showed in the single cell equals 225
to extract from a single cell: =VALUE(RIGHT(D8;4))
I tried to use an array formula but it seems to crash if a blank cell is in the array
I have a column with dates and times, and an associated column with data for all the dates and times. I want to add every hour of every day to the date/time column, but want the data associated with the times to stay in the row next to the correct time. How would I do this? In the attached file, i want to make coulmns A and B look like Coulnds E and F. I have hundreds (if not thousands) of rows, so i need a way to do this easily. Also, the times are not all evenly spaced or exactly on the hour. I dont need the times to be exactly on the hour or spaced out evenly, but i would like to have at least one time from every hour.
We have arrival dates and departure dates for guests and would like to figure out the number of meals needed on a particular date.
Named ranges: NumGuests _ArrivalDate _DepartureDate _CheckInTime _CheckOutTime Need number of breakfasts Number of Lunches Number of Dinners for a given day of the week.
So if a guest is here say Jan 25 arriving after 9am, staying 2 nights they will have Lunch and Dinner on the 25th, BLD on the 26th and BL on the 27th. Since by default most arrive after 9 (miss breakfast), we can eliminate the checkin time for the breakfast calc and make the first one for the next day.
There might be other guests staying through that time period. The ******* would like to know how many meals they will need to prepare for the week.
A B C D E F (B+C-D-E) Date Opening Stock Purchase Sales Consumption Closing Stock 17/7/2012 10000 5000 1000 2000 12000 17/7/2012 12000 2000 2000 1000 11000 18/7/2012 11000 0 1000 5000 5000 18/7/2012 5000 10000 3000 0 12000
Note : I want the above result as shown below datewise but no duplication of date but summing up of column C,D and E which is in above.Pls note that this is accounting question and also plz note that Opening stock(column B) from next date onwards must be equal to previous date closing stock(Column F).
Results :
A B C D E F (B+C-D-E) Date Opening Stock Purchase Sales Consumption Closing Stock 17/7/2012 10000 7000 3000 3000 11000 18/7/2012 11000 10000 4000 5000 12000 (B=F)
if I could get the formula in excel ,since this is the sample data as I do have a numerous & huge data like shown above datewise where I need to add C ,D and E but Opening stock(column B) from next date onwards must be equal to previous date closing stock(Column F).
Excel 2007 Q: I have a combo box (ActivX) that I want to be able to choose a a date from a range of dates in column A on sheet 'Working Copy'. I want a cell to update with the number/position of the date when the date is chosen i.e. the first date in the range yields 1 the second date yields 2 and so on. I also want the date to be displayed in dd-mmm-yyyy format. I am able to get the cell to give the correct position of the date but the date reverts to five digit number in combo box. I can change the code to return the correct date in the combo box when the date is chosen but then the cell just returns 0.
How can I make it so that the combo box returns the correct date and the cell updates with the position instead of jsut one or the other?
Here is the code I am using
Private Sub ComboBox1_Change() ComboBox1.Value = Format(ComboBox1.Text, "dd-mmm-yyyy") End Sub or Private Sub ComboBox1_Change() Sheets("Working Copy").Range("G1").Value = ComboBox1.ListIndex + 1 End Sub
in cell d20 i have a contract date in cell d21 i have a lead time this will always be in the format eg(2-3 weeks) in cell d22 i would like it to tell me d20 plus the first number of weeks ( before the hyphen) and in d23 the second number of the weeksafter the hyphen
I'm creating a workbook with the ultimate aim of graphing some data between any two dates. For this I plan to use the ComboBoxes on the Control Toolbox. Each ComboBox takes its range of data from a list of dates, with the cells set as Date format (custom as dd-mmm-yy), however when I select a date in the dropdown of the ComboBox, it is shown in number format, i.e. 38723 etc.
When I ask the ComboBox to put the output in another cell, it is input in text format as that number. Changing the output cell type does work, but once you select a new date in the dropdown, it reverts to text once again. how to set the ComboBox to display dd-mmm-yy format and it's output to be the same?
I'm trying to concatenate quite a few cells together. One of the items being included in the concatenation is a date, however when I do this the output is the numerical version of the date that Excel uses to mathematically calculate with. My question is how do I do a cell concatenation with the desired output showing the date, not the numerical equivalent used by Excel? Book1.xls attached is what I'm talking about.
I have created a standard input box for the date (UK)
datereceived = InputBox("Please enter the DATE the text message was received, please enter in format DD/MM/YY", , Date) Sheet1. Range("e" & x).Value = datereceived
I have formatted the cells for row 'E' for 'Date' and DD/MM/YYYY in English UK, But when I have inputted the date into the input box ( e.g. 01/05/2008 ), it inputs into the spreadsheet 05/01/2008 (American Obviously),
I have a formula in sheet code to get a total of the following columns. The formula in these columns is not working. I'm not getting any error. The code is working fine without a require output.
I am looking to create a function that outputs the upcoming quarter end date based on a specified start date, for which the quarter end is based on a broken fiscal year ending december 15.
As an example, say that you sign up as a customer with an internet provider on 2014-01-01. The internet provider charges all their clients on a quarterly basis and have a broken fiscal year ending on december 15. Hence, as you signed up on 2014-01-01 you will be charged on 2014-03-15, which is the date of the company's first quarter end.
So what I would like to do is to set up a function that outputs the first date I will be charged based on the date that I sign up. If I sign up between december 2013-12-16 and 2014-03-15, the formula should output 2014-03-15. If I sign up between 2014-03-16 and 2014-06-15, the formula should output 2014-06-15 etc. etc.
Is there a function that will output the column letter? For example there's one I know of: =COLUMN(), which outputs column number, but not the letter. And if not, can a formula be written to output it without converting the spreadsheet to R1C1 style or using the lookup function that refers to a separate table within the spreadsheet?
Using MS Query in Excel, I've created a simple query that pulls its records from an SQL dbase. Here's the statement:
SELECT uvVisit.FacilityListName, uvVisit.DoctorListName, uvVisit.Date, uvVisit.PatientVisitId, uvVisit.PatientLast, uvVisit.PatientFirst FROM CPS.dbo.uvVisit uvVisit WHERE (uvVisit.Date Between ? And ?) ORDER BY uvVisit.FacilityListName
The query runs fine and prompts the user to enter beginning & ending date ranges for the visit date when executed. So far...so good...but, this requires me to manually insert a line in Excel above the 1st record and type in something like: "For Date Range: MM/DD/YYY - MM/DD/YY" to denote the date range that the qualified records fall into (something the user wants to see).
However, I'd like to find a way automatically preface and display in the report's output (perhaps as the 1st line of the report in Excel??) something similar to what I'm already typing, and have it pull the beginning and ending MM/DD/YY values from those supplied by the user in the parameter.
The attached workbook has dates in column C, although some of these dates are just strings.
I'm trying to write some vba that will tell me how many of the cells in column C contain a date (or looks like a date) that is greater than (after) the real date in cell G1.
At the moment I loop through the cells in column C and can ascertain, which dates can be counted, then copy one row over at a time, but I'm looking for a slicker (perhaps one-liner) answer, perhaps by copying a block of rows in one go. The aim is to copy those rows to another sheet. There are many more rows than in the attached, and many sheets to process, and I have no control over the format of the dates/strings in column C. Currently it takes about 20 seconds to copy over the necessary rows, but I'm looking for it to happen much more quickly; current thoughts are to sort on column C (sorting on column C anything that looks like a number as a number - which has it's own problems!), have a count of dates satisfying the criterion (say using a worksheet formula such as COUNTIF or SUMPRODUCT, perhaps also using EVALUATE) then copy a block of rows in one go.
not very relevant, but the existing code is something like this which highlights rather than copyies the rows(included in the attached): ...