I get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets. sheet1.jpg sheet2.PNG
I want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
What formula do I use to double a number thats in another cell.
I need the formula to go into Column AC from the list of numbers that are in Column W
So for example if the number listed in W2 says 8 I need the column in AC2 to read 16 and when the next number down from that says in W3 -24 I need the column in AC3 to say -48 and so on.
I want to be able to drag the formula down the column (AC) so it picks up all the numbers in Column W3 and doubles each and every one of the numbers all the way down the page thousand of rows down.
So what ever number weather it's a plus or minus number I want it to double itself and have the number read out right next to it in the AC column to it's right.
I've just seen a formula with two - (minus) signs right next to each other placed before a section in a formula while reading possible answers to my post. Here is the link: Understanding this formula. I've seen it before and am intrigued as to why it is there and what it actually does. Assume it is used such: = --(1+2). Would the answer then not be =--3 = 3?
look at my attachment and see what I am doing wrong in my formula? I have a hard time understanding the Sumproduct formula and when to use comma's, double negatives, addition, etc.
We just upgraded our machines to Excel 2010 and now I'm having an issue with copying forumlas down. In Excel 2007 (and 03) if you double clicked in the bottom right corner of a cell, Excel would autofill your formula (or data set) down until the last row of data in your range. Have tried all the settings in 2010 and can't get it to work. All I'm able to do is do a manual copy/paste or highlight all the cells and select fill down.
I have two spreadsheets, one with master file with original data and one that needs to pull in the original data. My issue is all the data to match off of is in the same column, and a number of other files link to the master file, plus it is used externally, so I cannot alter it, and I would rather not create a mock/copy file. Is there a formula that can look for 2 different items within the same column? Would prefer not to use VBA, but if that's the only option I'll take it. I am using Excel 2003.
Here is an example of the setup - I would need the formula to reference off the two different items/categories in the column, so lookup off the 'St. Louis' and following that, lookup off the produce items.
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F 0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
I’d like to check each row in Column F and Column K of Sheet Check. If Column F has the contents “Out” and Column K has any contents inside its cell, I’d like to copy that row and insert it into Sheet Alert. As a result the same row will exist in Sheet Check and Sheet Alert. This code will cut the row out of Sheet Check and paste the row into Sheet Alert if the contents “Out” is found in Column F.
This is a worksheet to test multiplication tables. I am trying to create a macro button to clear the contents of column F, for the kids to start again?
I have cells in one worksheet that contain references to other cells in another sheet. I was wanting to print the contents of the first column of the row referred to. So if one sheet is called 'data' and a second sheet is called 'word finder' and 'word finder' has cells that contain references to cells within 'data' how would I then dump the contents of the cell within the first column of 'data' corresponding to the row of the cell referred to in 'word finder'?
I am trying to change this code to clear the contents of the last column of my "Master sheet". I am having trouble indexing to the last column, however. I found this code online but it looks much more complicated than it needs to be. Is there any way to do this easier/change this code to fit my needs?
Right now, the letter of the column I want to delete pops up in a message box, but I'm not sure where to go from there.
I am just getting started and have over 1000 items in the list. I want to be able to run a macro that would take the root portion of the image link and then replace the 'imagename.jpg' with 'modelnumber.jpg'
So start with Column 1 www.photobucket.com/a/aa/a/imagename.jpg Column 2 LAT-NR460
and end up with Column 1 www.photobucket.com/a/aa/a/LAT-NR460.jpg Column 2 LAT-NR460
Im trying to convert the data in certain columns to number. I need to select the rows in those columns based on the rows counted in another column with a different heading, this is because there can be breaks in the data half way down the columns.
The Code I have so Far is:
Code: Sub ConvertTonumber() 'Convert Certain Columns to numbers 'Use the "x"column to Calculate how many rows are required to fill the columns. Dim ColX As Range
Is there a way that I can make a macro that populates ComboBox1 of sheet 1 with the values in the B column, where the number of elements in the B column might be any value?
For example, if there are values in B2, B4, and B8, I want ComboBox1 to show those three values.
What is the proper VBA code to copy the contents of column T and column W (beginning at row 2 and ending at the last nonempty cell) in sheet 1 to column D and column E in sheet 3? Column T and column W always contain the same number of nonempty cells.
i have spent hours on with just no idea how to do it.
Write a function named MyOddSum(R) that returns the sum of values in the odd columns in the range R. Use a double ‘For … Next’ loop structure to do the summation. (Hint: Use R.Rows.Count and R.Columns.Count to set the index counters for the double ‘For … Next’ loops. Also, use ‘Step’ keyword to specify odd columns.)
