Macro To Find End Of Column And Paste Contents In Column 1
Mar 11, 2009
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
I am just getting started and have over 1000 items in the list. I want to be able to run a macro that would take the root portion of the image link and then replace the 'imagename.jpg' with 'modelnumber.jpg'
So start with Column 1 www.photobucket.com/a/aa/a/imagename.jpg Column 2 LAT-NR460
and end up with Column 1 www.photobucket.com/a/aa/a/LAT-NR460.jpg Column 2 LAT-NR460
Currently there are 3 sheets in my wbook, however there are likely to be 30 or so soon enough. Each sheet has loads of Cols of data and no sheet is generally the same.
I'm after my "Control" sheet to display a replica of the columns entitled "Destination" found in all other wsheets. i.e. each sheet has a destination col and I need an automated way of getting these lists side by side.
The challenge I'm faced with is that the destination col in each sheet is never usually in the same column, i.e. sheet1 could be colA, sheet2 colB etc and each sheet might contain more than one destination col,
I have a macro that copies data from one sheet to another. I would like getting the macro to figure last row used in column B from B3 on and put the word Sum below it. For example, if last row used is B64, on B65 would like the word sum on it.
I cannot just input in as the number of rows could change when macro is run. Data is dynamic.
Here is simple code I have:
Sub Weight() Sheets("Final Month").Select Range("A2:B1055").Select Selection.Copy Sheets("Final Weight").Select
The idea is that i have several monthly data in columns. I also have a subtotal column that can be a "Total Trim I", "Total Trim II", "Total Trim III" or "Total Trim IV". I also have a yearly total: Jan Feb Mar Total Trim I Apr May Jun Total Trim II Total 2005
I wanna cut the "Total Trim I" column, paste it after the Yearly Total and cut and paste the "Total Trim II" after the "Total Trim I" column for every year... It'll look like this: Jan Feb Mar Apr May Jun Total Trim I Total Trim II Total 2005. But not every trimester has 3 months... I've been thinking about a find function but i have troubles with the implementation.
how does one go about finding a specific valuein a worksheet, then selecting the value in the next column, then pasting the value in a different worksheet? For example, I want to find a particular person's name in a worksheet, upon finding the name, I want to select the number associated with the person which is in the column to the left of the name. I then want to copy and paste the number in a different worksheet.
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace() ' ' Macro2 created by david '
' for the entire sheet, moving from one cell to the next down the column, changing rows ' search for the contents in another sheet, and then if that is found, ' copy the row number to a variable, and then ' copy column K from sheet 1 to column N of sheet 2, using the same variable above ' after that same, but L goes to P. ' ' Windows("file1.xls").Activate Rng = Selection.Rows.Count Dim toFind As String ActiveCell.Offset(0, 0).Select Application. ScreenUpdating = False Dim i As Integer For i = 1 To Rng Windows("file1.xls").Activate toFind = Range("A + i") Windows("file2.xls").Activate
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F 0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
I have a workbook that has 397 sheets. On many of the sheets (but not all) they have some of the same data. On sheet 1 cell B5 is ContactID, Sheet 15 cell B32 is also ContactID. Sheet 1 A5 needs to reflect Contact ID and Sheet 15 A32 needs to reflect Contact ID. I need to find all sheets that contain the data "ContactID" and place (paste?) Contact ID in the same row, but in Column A.
Right now I am doing a Find all and clicking through the sheets 1 at a time (some of these finds though have 30+ sheets).
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I recored a macro to Cut the entire "E" column and paste on "A". For some reason when i read the code it doesnt capture the part where it needs to paste it in column "A".
I have a data sheet with large macro for processing the data... the last piece of the puzzle is to cut the entire row and paste it into the next available row in another sheet within the workbook if the value in column N is >0. I have tried a few things that I have found out in various places on the net but i seem to always come up with a loop or error of some sort.
I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.
My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.
Right now during the first pass it pastes in column B, I want it to start in column D
The issue seems to lie right under where it says "Put data into workbook"
Public Sub PullData() Dim wkb As Workbook Dim lngStore As Long Dim strDate As String Dim strName As String Dim Book As String Dim Sheet As String Dim week As String Dim Store As String
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
I’d like to check each row in Column F and Column K of Sheet Check. If Column F has the contents “Out” and Column K has any contents inside its cell, I’d like to copy that row and insert it into Sheet Alert. As a result the same row will exist in Sheet Check and Sheet Alert. This code will cut the row out of Sheet Check and paste the row into Sheet Alert if the contents “Out” is found in Column F.
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities 0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities 0014B22<@44>Soil Properties and Qualities 0014B22<@44>Soil Properties and Qualities 0014B23<@28>Coursey 0014B23<@28>Ogles 0014B23<@28>Shelocta 0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches) 0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches) 0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches 0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
