What is the proper VBA code to copy the contents of column T and column W (beginning at row 2 and ending at the last nonempty cell) in sheet 1 to column D and column E in sheet 3? Column T and column W always contain the same number of nonempty cells.
i have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
I am using the following code to copy the contents of a DDE feed.
Code:
Private Sub Worksheet_Calculate()
Worksheets("Sheet2").Range("A1").EntireRow.Insert Shift:=xlDown
Worksheets("Sheet1").Range("A3:F3").Copy
Worksheets("Sheet2").Range("A1:F1").PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End Sub
What I want to do is only copy the row when the columns contain data, as it stands at the moment it's copying blank rows to sheet 2. Is there a way that I can do this?
I have data beginning in cell A6 and continues through cell A13 for this instance. I want data in cell A6 on sheet 1 to be copied to cell B1 in sheet 2; data in cell A7 sheet 1 to be copid to cell C1 sheet2 and so on till all of the data in the continuous range beginning in cell A6 of sheet 1 has been copied to row 1 beginning in cell B1 of sheet2. This seams relatively easy but below is my failed attempt at this.
Code:
Sheets("Data Request").Select
Dim DATAREQUEST As Long, TYPESRws As Range
TYPES = WorksheetFunction.Max(Range("A" & Rows.Count).End(xlUp).Row)
DATAREQUEST = Range("A6", "A" & TYPES).Rows.Count
Sheets("Data Retrieval").Select
For i = Range("B1", "1" & DATAREQUEST).Columns.Count To 1 Step -1
Sheets("Data Retrieval").Select
[B1] = i
ActiveCell.Offset(1, 0).Select
Next i
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
I have a script that copies data to files based on many cells contents but where I am having a problem is creating series numbers for each file.
File-01.txt
File-02.txt
..
File-100.txt
In my current code I copy files to folders by date and each folder I need series of files (Lab Testing series)
In column A1:A100 I have a series of numbers 01, 02, 03 ...100
Column B contains the Files to be saved
C:LAB2012Jan1file-01.txt
C:LAB2012Jan2file-01.txt
C:LAB2012Jan3file-01.txt
C:LAB2012Jan4file-01.txt
...
..
C:LAB2012Dec31file-01.txt
So this works fine
I now need the Script to do is to loop to Column A and select Cell 2 and do the File Copy again on the Next series
C:LAB2012Jan1file-02.txt
C:LAB2012Jan2file-02.txt
C:LAB2012Jan3file-02.txt
C:LAB2012Jan4file-02.txt
...
..
C:LAB2012Dec31file-02.txt
When Complete repeat until it reaches the end of column A
Since my Cells are populated by all the data in the workbook I thought at the end of my copy script I would take the next Cells data in A and put it in Cell H8 where all the constants are for the file names.
Column B is built using
=IF($C1="","",$I$1&$G$4&$D1&""&$I$8&$H$8)
=IF($C2="","",$I$1&$G$4&$D2&""&$I$8&$H$8)
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
I’d like to check each row in Column F and Column K of Sheet Check. If Column F has the contents “Out” and Column K has any contents inside its cell, I’d like to copy that row and insert it into Sheet Alert. As a result the same row will exist in Sheet Check and Sheet Alert. This code will cut the row out of Sheet Check and paste the row into Sheet Alert if the contents “Out” is found in Column F.
View 2 Replies View RelatedWhat VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View RelatedI've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
I have a small workbook that copies 4 cells to a database list as per the code below, 2 of the fields activate a pop up calendar for date input on a button push the data is transfered to the sheet and the cells are cleared, however on the clear contents parts at the bottom of the code it reactivated the pop up calendar,
is there a way of not having this pop up when clearing the contents.
This code is supposed to clear the contents of row 6 cell if the contents of row 5 cell is blank/cleared. I get an error on the "If Intersect" Line. What's wrong?
View 4 Replies View RelatedSmall piece of code to clear the contents of
Rows 33 thru 100 , then
Rows 142 thru 209 , then
Rows 251 thru 318 , then upto
Rows 43524 thru 43591 then finish
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View RelatedI have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.
View 5 Replies View RelatedI have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F
0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
ABBEY CT
1700
1700
1703
1703
ABERDEEN LN
1305
1313
1321
1321
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
Need way to interupt my code whilst the user selects a row. ie. if I wanted to move the contents of one row to another I would want to say: "select source row" (and want the user to click on any cell in that row) I could then put the rownumber in a variable with
View 2 Replies View RelatedI want to delete the contents of every cell without deleting any code from my module. The reason I ask is, I'm reading from a text file into excel.
I want to run my code to read text into excel one time through. Then i want to delete all the text, make some alterations to my code, and run the code again. That way each time the worksheet is fresh and clear before i run the code.
Is it possible to write VBA code that will prevent a user from changing a cell's contents, depending on the cell's font color?
More specifically, I have a column of text in range B15:B64. Some of the cells will have a black font, others will be blue. Is it possible to lock the black font cells only, leaving the blue cells unlocked for users to change?
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedIn column A, i have cities.
In column B, i have dates.
I would like column D to have both the city and its corresponding date e.g. "paris (12/06/2013)"
However, I am getting "paris (41437)". Is there anyway to make the date appear properly?
I need a macro to have the copy of selected cells on sheet1, and paste it on sheet2 of the same workbook, whenever I take the print of the sheet1. My requirement is that Each time when I take the print, the selected items get pasted simultaneously on next available cells on sheet2.
Example of my worksheet is attached : Example.xlsx‎
I am trying to copy a column of cells from one sheet to another, but also want to keep all the formatting. The origin sheet has times, but when I copy these to the destination sheet they are displayed as decimal numbers (using the code snippet below). I can change these back to times by formatting the cells using the format painter after the macro completes but I would like the VBA to do this for me. (using 2002 SP3).
View 4 Replies View RelatedI would like to do now would be to only copy the rows that also contain the word sold in column C. I guess that I could do this in two stages, first copying the rows based on the year then copy again based on the word sold in column C. It would be nicer to make a slight modification to my code and do it all in one step.
View 2 Replies View Related