Print Contents Of First Column Of Row Referred To

Feb 17, 2014

I have cells in one worksheet that contain references to other cells in another sheet. I was wanting to print the contents of the first column of the row referred to. So if one sheet is called 'data' and a second sheet is called 'word finder' and 'word finder' has cells that contain references to cells within 'data' how would I then dump the contents of the cell within the first column of 'data' corresponding to the row of the cell referred to in 'word finder'?

View 1 Replies


Active Cell Referred By A Formula

Sep 19, 2006

I have a "Match" formula in a cell that gives me the Row number of the Cell matching the criteria (lets say row 502) and the Column is always B. With VBA I want to make my ActiveCell the cell (B502) referred by the "MATCH" Formula.

View 5 Replies View Related

Print Listbox Contents

Aug 7, 2006

I have a listbox on my userform that displays records from my worksheet on search.

I am trying to figure out how can I :

1) Print the selected Record (line)

2) All Rescords/Lines displayed in the listbox

My listbox displays 10 columns (A:J) , but I want to print 11 columns (A:K) in the actual printout.

I am thinking of doing this may be by having 2 buttons : "Print All" or "Print this Complaint" or may be using a checkbox to select either option...

View 5 Replies View Related

Get Copy Of Contents On Next Sheet Whenever Print Is Taken

Jul 11, 2014

I need a macro to have the copy of selected cells on sheet1, and paste it on sheet2 of the same workbook, whenever I take the print of the sheet1. My requirement is that Each time when I take the print, the selected items get pasted simultaneously on next available cells on sheet2.

Example of my worksheet is attached : Example.xlsx‎

View 5 Replies View Related

Print Based On Cell Contents

Aug 28, 2009

I have put together a spreadsheet to help with the creation of work orders. I have a summary page that the user can define which category the work order falls under along with this I have a couple of macros set up that will print a specific work order pertaining to the category they selected. I have run in to a few problems (mostly training users) that I would like to eliminate up front.

I am looking for a macro that I can use to look at the contents of a cell (contains a word that corresponds directly to the name of one of the sheets in the work book) and print the worksheet that has the same name as the contents in the referenced cell.

View 3 Replies View Related

Filter Cell Contents To Print

Feb 2, 2007

I have an excel worksheet that gets populated from VB6 and Access 2003. When the program runs, populates the database, any empty fields are set to = "N/A" or 0 (number zero). When the information is passed to excel, one cell could have several records. For example, the database may have "Area1 Area2 N/A 0" that gets passed to the worksheet cell. What I would like to do is to have excel ignore the N/A and 0. Is it possible?

View 3 Replies View Related

How To Clear Contents Of Clipboard Before Tool Takes Screen Print In Excel VBA

Apr 20, 2014

I've have a tool/code that takes the screen prints of the active window (when I press F9) and pastes it in a word document.

But whenever I do copy some text or any other image and when I press F9 to take the screen print of the active window. I get the text pasted into the word, this is because the clipboard content has text first and then the screen print of the active window.

Instead When I press F9, I wanted the below to happen

1. Content from the Clipboard should be cleared

2. Take the screen print

3. Paste it in the word document.

Note: My tool/code already does 2 and 3. Looking for 1 alone, ,

View 4 Replies View Related

Referencing Selected Tabs To Print Selection & Update Table Of Contents Sheet

Nov 30, 2009

I searched but didn't find exactly what I needed. I have a workbook with 31 sheets. It is a price guide with each category on a separate worksheet. I figured out how to list the sheets on a separate tab. What my client wants is the ability to:

1. select certain categories for printing, the ToC, Cover and backcover pages have to print in every case

2. the ToC has to change depending on the sheets selected.

I'd rather write some code and give him an an easy command button rather then teaching him how to select non-concurrent sheets and printing only active sheets.

What I'm really stuck on is the updating of the ToC with active sheets only (category and starting page which changes depending on pages selected).

View 13 Replies View Related

Print? Print Up To Last Entry In Column A +1

Nov 12, 2006

I would like to print up to row of the last entry in column A + 1 more row
eg:last entry is A40,printing would print up to A41,

View 9 Replies View Related

How To Print Only Contents Of Textbox From Userform Not Whole Userform

Apr 26, 2014

I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is

[Code] ......

But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...

View 2 Replies View Related

Clear Contents Of Column Based On Data In Another Column?

Apr 10, 2014

I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.

View 1 Replies View Related

Color Fonts In Column G Based On Contents In Column E

Jan 21, 2009

I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.

View 5 Replies View Related

Macro To Find End Of Column And Paste Contents In Column 1

Mar 11, 2009

I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.

In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.

View 4 Replies View Related

Column Number Of Last Column In A Row Where Cell Contents Greater Than 0

Jun 24, 2014

I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.

Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.

0 2 5 0 6 0

So the formula in G1 would return a value of 5, which corresponds to column E.

View 3 Replies View Related

Auto Fill Column B Based Contents Of Column A

Apr 19, 2007

I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.





View 4 Replies View Related

If Column F Has Out And Column K Has Any Contents Copy The Row

Dec 9, 2009

Id like to check each row in Column F and Column K of Sheet Check. If Column F has the contents Out and Column K has any contents inside its cell, Id like to copy that row and insert it into Sheet Alert. As a result the same row will exist in Sheet Check and Sheet Alert. This code will cut the row out of Sheet Check and paste the row into Sheet Alert if the contents Out is found in Column F.

View 2 Replies View Related

Vba Clear Contents Of Column

Apr 8, 2009

I dont know how to copy an excel sheet into the question.

But assuming the following text starts at CELL C2 (this is just a section of the workbook)


2x55Try Again?
3x55Try Again?
4x55Try Again?
5x55Try Again?

This is a worksheet to test multiplication tables. I am trying to create a macro button to clear the contents of column F, for the kids to start again?

View 9 Replies View Related

Locking/Freezing Contents Of A Column

Apr 15, 2009

I'm using Excel 2003 and was wondering if there was a way I could Lock/Freeze the contents of a column. For Example:

Cell A1 has the formula =B1+C1+E1 - figure shown is 405
Cell A2 has the formula =C2+D2+E2 - figure shown is 650

Is there anyway I can freeze column A so when I delete column B,C,D,E ect the correct figure will still show?

View 4 Replies View Related

Clear Contents Of Last Column With Data

Jan 28, 2014

I am trying to change this code to clear the contents of the last column of my "Master sheet". I am having trouble indexing to the last column, however. I found this code online but it looks much more complicated than it needs to be. Is there any way to do this easier/change this code to fit my needs?

Right now, the letter of the column I want to delete pops up in a message box, but I'm not sure where to go from there.

[Code] .....

View 2 Replies View Related

MACRO To Move Contents To The End Of Another Column

Jun 2, 2009

I am just getting started and have over 1000 items in the list. I want to be able to run a macro that would take the root portion of the image link and then replace the 'imagename.jpg' with 'modelnumber.jpg'

So start with
Column 1
Column 2 LAT-NR460

and end up with
Column 1
Column 2 LAT-NR460

Column 1 could start empty or just with the root.

View 9 Replies View Related

IF Formula With Double Contents In A Column

Aug 15, 2009

the formula i used is " =IF(A2=A3;"YES";"NO")

the contents are as follows


2525 - YES
2525 - NO
2526 - YES
2526 - NO
2528 - NO
2530 - NO
2527 - YES
2527 - YES
2527 - NO

how can i use a formula... that tells the last double entry yes too instead no?
for example above...

2525 - YES
2525 - NO (i want the formula say this "YES" too..)

So i want to find out through filtering.. all the double entries with YES.. so i can work with it without missing any double entries.

View 3 Replies View Related

Formatting Table Column Contents

Nov 22, 2011

I have converted a table from PDF to Excel format....

The table consists of longf columns with rows of data in each column.

Once converted to Excel format, the columns become single cells with say 100 rows in each cell.

My question is this:Can I reformat these larger cells such that each row within the long single cell gets its own single cell.

This would enable me to copy paste the data into a spreadsheet and avoid the data entry....

View 1 Replies View Related

How To Convert Column Contents To Number

Jan 4, 2014

Im trying to convert the data in certain columns to number. I need to select the rows in those columns based on the rows counted in another column with a different heading, this is because there can be breaks in the data half way down the columns.

The Code I have so Far is:

Sub ConvertTonumber()
'Convert Certain Columns to numbers
'Use the "x"column to Calculate how many rows are required to fill the columns.
Dim ColX As Range


View 8 Replies View Related

Filling Combo Box With Contents Of A Column

Jun 27, 2007

Is there a way that I can make a macro that populates ComboBox1 of sheet 1 with the values in the B column, where the number of elements in the B column might be any value?

For example, if there are values in B2, B4, and B8, I want ComboBox1 to show those three values.

View 9 Replies View Related

VBA Code To Copy The Contents Of Column

Aug 9, 2007

What is the proper VBA code to copy the contents of column T and column W (beginning at row 2 and ending at the last nonempty cell) in sheet 1 to column D and column E in sheet 3? Column T and column W always contain the same number of nonempty cells.

View 9 Replies View Related

Sum Contents From Column Without Including Hidden Rows

Apr 13, 2007

Which formula should I use if I want to sum a column without including content from hide rows in the same column.

a2 is hided so I need the sum = 6


View 9 Replies View Related

Calculate Contents Of Column Where There Are Empty Cells

Jan 16, 2013

In the Wheelchair 1, 2, 3 & 4 sheets in the attached workbook, I would like to do a simple calculation of the contents of column 'H'. Instead of it adding up to just a few £'s I'm getting the result of something like -£5880.00. I think I know whay is wrong, but I don't know the solution to it. Column 'H' populates when a date is put into Column 'E' So if cells if cells in Column 'E' are empty then column 'H' doesn't do the sum.

What I think I need is a bit of formula to put into column 'H' to tell it to ignore blank spaces and count what is there.

Wheelchair Hire-Sample New (1)(1) (2).xlsm‎

View 3 Replies View Related

Clear Contents Of Column In Range Variable?

Feb 11, 2014

I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below

[Code] .....

View 3 Replies View Related

Fill Drop Down Box With The Contents In A Selected Column

Jul 20, 2009

I would like to fill my dropdown box with the contents in a selected column (removing duplicates).

View 13 Replies View Related

Insert Contents Of Text Box In Row / Column Intersection?

Jun 18, 2013

I have a large spreadsheet that has row and column headers. I am trying to build a user form that will basically have a row combo box (already populated with the row headers), a column combo box (already populated with the column headers) and a text box. I need what ever I type into the text box to be inserted into the cell where the row of what I pick in the row combo box and the column of what I picked in the column combo box intersect.

For Example:

If I pick "Apple" in the row combo box which is in cell B1 and "Red" in the column combo box which is cell A4 to insert what ever I put in the text box into cell B4.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved