I have amended the code but it's for columns. I want this formatting for entire row 4 only and not for columns. Because it's disturbing my program if there is any data using ':' sign then the same formatting is applied which I don't want.
[Code] .....
The ':' sign is not changing to bold. I want to bold ':' sign too.
How to amend the code for entire row 4?
Hello, below is a sample of my excel sheet. The number of rows keep changing daily and the Month and year column has to be populated automatically as and when there is a new row inserted. I tried the formula =MONTH(A:A) and I paste it on the entire column. it works for rows with data but I also get 104,000 odd blank rows added to my excel because I pasted the formula on the entire column.
View 7 Replies View Relatedway to put a simple formula in a colum that will apply to the entire column, no matter how many rows without having to physically copy it to the number of rows required?
View 11 Replies View RelatedI currently use the PROPER function for one column at a time. How can I apply it to a whole worksheet, preferably without creating new columns?
View 9 Replies View RelatedI have a column (A) where there's a date in each cell. Currently it is formatted as category "text". All entries where initially entered as 'yymmdd', but using category "number". Beacause of that all zeros in the year disappeared, so now they are shown as "ymmdd".
Can someone show me/tell me how to convert all these dates from category "text", to category "date", using format "yymmdd"? I have tried again and again and again, but can't make it work. I have attached a sample of the sheet.
I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
I'm using the following VBA code that highlights a selected cell or range of cells when selected (to more easily see what cells I've selected).
[Code] .......
I'd like to use this code on every worksheet within every workbook that I open. Right now I've only inserted the code in "This Worksheet" in a single workbook and that's the only place it works. I tried creating an Add In with the code so that it worked in all workbooks, but it doesn't work.
Step 1. In Col E a list of amounts will be pasted on a daily basis.
Step2. I need a macro that will look at the last code in Col F and apply the next sequence so $36,543.00 will have OPS003, since i might paste more than one amount in Col E i would like the macro to do the same thing also in Col F. I have a formula in G which will tell me what amounts are outstanding and which have cleared.
AmountCode 12,545.00 OPS001 1,236.00 OPS002 36,543.00
I recorded a macro in an Excel Workbook which contains 65 worksheets (--this is something received on a quarterly basis for which I have no control). The macro is successful within the workbook created however, a new quarter's data may or maynot have some of the referenced worksheets. 64.9 Waiv - 1 may exists and the others (2, 3, 4, etc) not. The macro fails and prompts for Debug if a worksheet does not exist.
Sheets("64.9 Waiv - 1").Select
Sheets("64.9 Waiv - 2").Select
Sheets("64.9 Waiv - 3").Select
Sheets("64.9 Waiv - 4").Select
Sheets("64.9 Waiv - 5").Select
Sheets("64.9 Waiv - 6").Select
Sheets("64.9 Waiv - 7").Select
Sheets("64.9 Waiv - 8").Select
Sheets("64.9 Waiv - 9").Select
Sheets("64.9 Waiv - 10").Select
Is it possible to alter the macro to look for and only invoke the code if a worksheet past 1 were to exist?
This is what I am requesting the macro do:
Sheets("64.9 Waiv - 1").Select
Range("B9").Select
ActiveWindow.FreezePanes = True
ActiveWindow.SmallScroll ToRight:=5
Range("J8").Select ...............
I have an excel spreadsheet that performs a particular calculations using a large set of data. However, I have over 1000 sets of data that need to be feed into this sheet and obtain the output calculation. Obviously I don't want to have to copy and paste in each new set of data to obtain my result as this would take a very long time. I am brand new to VBA, so was wondering if there is a way to write code in VBA that will automatically perform these calculations for one data set, save the output into a cell, and then move to the next data set and so on?
View 4 Replies View RelatedI would like to group some columns to all the sheets that I will have selected. Unfortunately the below code only apply the code to the sheet I am looking at.
Code:
Sub Group()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
With ws.Range("F:Q").Group
End With
Next ws
End Sub
The code below restricts users from inputting anything other than an uppercase "X" in a cell within column N. If the user types a lowercase "x", it would automatically convert it to uppercase. If any other value is entered other than "X", a message box will fire.
The code is specific to column N (column 13). However, I would like to apply this to multiple columns, such as columns 13,14,17,20 .....
I havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
I have to create autofilters dynamically on x columns based on the selection I make. I created this code but is not working.
LastColumn = Cells. Find(What:="*", After:=[A1], _
SearchOrder:=xlByColumns, _
SearchDirection:=xlPrevious).Column
Range(Cells(17, 1), Cells(17, LastColumn)).Select
With Selection
.AutoFilter = True
End With
The following code filters my sheet to show only values less than 0 in column T, (column 20).
View 5 Replies View RelatedI have been given a project to develop a spreadsheet using excel that will take data that is for a whole month, and evaluate by DAY to see if the same doctor was listed as attending two patients in surgery at the same time. If the Doctor's name is the same for two patients within the same timewindow for a certain day, a code is applied to EACH RECORD that the doctor was attending in the code field. If there was NO DUPLICATE patient, a different code is applied in the code field.
The tricky thing about this is:
1) Number of records will vary month-to-month
2) There could be 1-xx patient records where the same doctor is listed and there is overlapping time in the SAME DAY OF THE MONTH.
3) The code applied to multiple patients in the code field applies even if the minutes of overlap = 1 minute.
4) Start/End times and length of the patient visits will vary. (Example - Dr. Jones has two patients on the 15th of the month. The start time for patient 1 is 9:00am and ends at 10:15am. The second patient's start time is 9:30am and end time of 11:00am. Under this situation, the multiple patient code would apply)
Does anyone have any experience evaluating by date, then within a time-window to check for record overlap (doctor name in this case)? There could be 200-1500 records per month, and 100/day to evaluate for overlapping.
I am using this code and it works fine:
Dim MyData As Range
Dim MyResult As Range
Set MyData = Range("E1:E1000000")
Set MyData2 = Range("F1:F1000000")
Set MyResult = Range("J4")
MyResult.Select
Selection.Formula = "=COUNTIFS(" & MyData.Address & ",""=Kim""," & MyData2.Address & ",""=done"" )"
Is there any way I can change the code so that it automatically finds the last cell as Im using Range("E1:E1000000") and Range("F1:F1000000") because there will not be more than 1000000 entries.
i was currently gave this code. Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp)(2) = Me.TextBox2.Text Is there away this can modified to go to the next completly empty row in stead of just "A"? Like maybe A thru L or the entire row would be ok.
View 5 Replies View RelatedSo I have an option on my userform that the user input selected.
I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]
Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.
Need code and here to input in the Code sheet?
How can we delete entire row using VB Code.
say example i want to delete a row having name 'Anis' by clicking on a buttton
is this possible?
I am looking to read the source code for a website that keeps the stats for a hockey league in Sweden
For other sites i can use the code below and it works fine, but the site i am using to get the Sweden stats seem to keep the data in some type of a Java app (sorry still somewhat of a newbie) and doesn't work the same as the others
when i veiw the source code just by right clicking the page all the data i want shows up. When i try to use my code it doesn't get the stuff i want.
I have tried both objDoc.body.innerHTML and objDoc.body.outerHTML and i get different results but not the same as right clicking on the page and viewing the source, is there another command that i can use to get it all?
the website is
HTML [url]
Sub Get_Stats()
Const strURIpre As String = [url]
Set ie = CreateObject("internetexplorer.application")
ie.Navigate strURIpre
Do
If ie.ReadyState = 4 Then
ie.Visible = False
Exit Do
Else
I found code that I would like to use conditional formatting code as shown here. Here is the code just in case:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20
how can I get this code to work across the entire workbook and not just for the specific worksheet? I tried pasting the code into the This Workbook under VBA Project and changing the Private to Public but no go.
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedI'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code
View 3 Replies View RelatedI'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
I am trying to record a macro that edits a rows data, and simply copies it to a new cell further along on the same row,. but i then want it to move to the next row down, and apply the same macro to that run, and continue until there is no data in the last row,. How do I get the macro to continue to the end of the data.
View 5 Replies View RelatedI want to apply conditional formatting by VBA. Cell Q2 contains the month number, (in this case 11). I want each cell in the range D2:D50 to be filled in red and the word 'UNPAID' appear if Q2 is greater than 10 and the cell is blank, otherwise no formatting at all. I'd like this to be triggered on the Worksheet_SelectionChange event if at all possible.
View 4 Replies View RelatedI am trying to create a macro (which will go in an add-in, using Excel 2007) which will apply a custom format to any selected cells which have their formulae hidden (Format Cells, Protection, Hidden). A similar macro works fine for locked cells.
Here is the UDF I wrote, which returns True/False based on the Hidden status of a cell:
VB:
Public Function Hidden(Check_Cell As Range)
Hidden = Check_Cell.FormulaHidden = True
End Function
[Code]....
just place all three pieces of code into a module, and change the first line of the two macros to a standard "Sub Macro1()" type format.
Have a look at the attachment : Book1.xlsx
What I want to do is to apply vlookup in cell E2 and whenever we apply vlookup taking lookup value 'A2' the value in the adjacent cells B2, C2 and D2 should show up in the "Ans' column cell "E2".