So I have a list of numbers in column A with an amount in column B. There are duplicates in column A. I need those duplicates pulled out into another cell with its amounts from column B, then total the amounts from column B. This would give the user the total amounts from column B. I have attached a sheet with the examples hand typed.
View 4 RepliesCreating a project tracking sheet that is as automted as possible so that people dont have to populate lots. I have managed to get it to create a new sheet and populate according to a filled out combobox. The user then populates a 'milestone' section. When a button is clicked these are transferred to a GANTT chart type sheet and pasted. Before they are pasted the macro checks if the project title exists, if it does not it first pastes the title LEFT INDENTED. Then follows by pasting the milestones CENTRED. If the title exists, it inserts the milestones under the project title by copying and pasting all milestones. Hence, if milestones are regularly added, it will begin to add duplicates of the same milestone. I need to remove these. I would usually be able to do this however there is often the same milestone in numerous projects which I CANNOT remove as it would loose data. I would like a code that says between the cell I was searching for (Rng) and the next cell which is also left indented to remove duplicates. Basically I can't use x1enddown because it needs to stop at the next cell which has the same formatting... i.e. only duplicates to be removed out of the cells which are centred. I would then like it to repear this action for the whole document and move the next left indented cell and do the same.
It feels like a kind of backward conditional formatting is what I am looking for
Here is my code as it stands
Dim FindString As String
Dim Rng As Range
FindString = Range("D2").Value
If Trim(FindString) <> "" Then
[Code]....
I have written a UDF to do some calculations i a workbook. I would like to run a sub, checking the cells in the spreadsheet to see if my formula is present. and if so, then add or change an argument in the formula. My problem is:
How do I write the code so that it will recognize my formula ? Is it possible to attach a tag to a formula which Excel can search for ? I cannot search for the formula including arguments from specific cells, relativ to the formula cell, as the user is free to input the arguments with reference from anywhere in the workbook.
I have two worksheets one worksheet contains Insurnace names and Addresses from a hospital. I need to match these up to specific Insurance codes from a billing company worksheet. The bad thing is my billing database has multiple duplicate addresses for different insurances (Yes this does happen where different Insurances have the same address-don't ask me why). So originally I did a VLOOKUP where I looked up the address from the hospital Spreadsheet and matched it to the Insurance Specific code. The pitfall to doing it this way is that it only grabs the first exact match from the Billing worksheet. Is there a way to either automatically identify the possible matches and allow me to choose which one is the exact match or how do I just identify duplicates on my billing worksheet and match them manually? I attached the worksheet.
View 9 Replies View RelatedI'm trying to Count duplicate text on sheet 2 and populate the number of times repeated on sheet 1.
On sheet 1 I have A3:A128 and would like the number of times these respective cost centers are repeated in Sheet 2 to populate Column B of Sheet 1.
File attached.
Not sure which formula to use. I tried CountIF but didn't work with 2 sheets.
i got a little problem with a piece of code that i can't seem to understand.
i have a column that is dedicated for a vlookup and there are some #N/A values.
im trying to take these #N/A values and copy and paste them somewhere else.
If Range("P" & i & "").Value = "#N/A" Then
I need some code to identify a cell value in a row and copy the entire row to a new worksheet, then move down to the next row and repeat to the end of the worksheet.
There are 4 vlues I would need to identify:1,3,7 and 28.
Am looking for a VBA code that will highlight a changed/edited text from a particular cell. For example - If I have a text in cell B2 as - TEST, and the same text is in C2 as well. However, when I change text in C2 to TEST1 or TES, the change should be highlighted.
View 6 Replies View RelatedI Have Data in my excel where i need to findout the Duplicates as well as unique if there are duplicates in the given column.
For eg In Column "M" if there are Five "ABC" so i need all the five ABC as a Duplicates and not only 4 ABC as Duplicates and one as Unique.
ABC
B
C
ABC
ABC
ABC
ABC
D
E
I have two columns of B2 and C2 data in the same worksheet and want to identify duplicates in the columns and return a value of true or false in column D. The formula I have been utilizing is:
=IF(ISNA(VLOOKUP(B2,$C$2:$C$5000,2,FALSE)),0,VLOOKUP(B2,$C$2:$C$5000,2,FALSE))
However, i receive a #REF# return in D. What am I missing ?
I am trying to write a macro to check for duplicate numbers. My logic is as follow:
If(A2-A3=0) Then
B3=1
I want to write the macro as follow:
Select Check>0
Do While Check <885
If(A2-A3=0) Then
B3=1
End If
Loop
I need to identify duplicates in a list and have the foilowing formula:
=IF( COUNTIF(range1,A2)>1,"Duplicate","")
This works ok but i have a further condition which i dont know how to factor into the formula. I think i could write some vba to determine the dupes but i was hoping to avoid this as im sure it will take me an hour or so. Duplicates are identified at the moment as being identical numbers in column "amount", i now need to specify duplicates as being identical numbers in this range where there is at least one row with no pay date filled in in col "paydate"
What is the best way to track blank/empty range cells?*Have tried 'IsBlank' but it keeps showing "False" (cell range: H7:P7, no value and spaces)
View 3 Replies View RelatedI have an excel sheet that has conditional formatting. Whenever few cells are not in required format, the cell's backcolor will become red. I am trying to design a macro to check if there are any cells in red due to conditional formatting.
View 1 Replies View RelatedI am working on a spreadsheet in Excel '07 that will pull data from online and reformat it in a way that another program can digest. The last thing I need is for excel to recognize if there is a 6 digit number in a specific column.
This is tricky for two reasons:
1. Numbers come in three different formats, ### ###, ######, and ###.###
2. Sometimes there is also text within the cell, however I need to pull out just the 6 digits, and place them in another cell with format ### ###
Is there a formula or macro that will identify which cells on a spreadsheet containing various dollar values will add up to a predetermined total? I work in Accounts Receivable and sometimes vendors send in payments for several invoices with no instructions as to the application. I want to be able list the available invoice amounts on a spreadsheet, and be able to tell which of the cells add up to the payment amount.
View 2 Replies View RelatedIs there an easy way to show/return any Unprotected Cells on a Protected Worksheet?
View 8 Replies View RelatedI want to select the cost for fuel based on the date using the select case method.
Sub FuelCostApplication()
Dim Check As Integer
Do While Check < 10
Select Case Range("B4").Value
Case 8 / 30 / 2007 To 9 / 5 / 2007:
Range("C10").Value = Range("B4").Value
ActiveCell.Offset(1, 0).Select
Case Else
Range("C10").Value = 0
End Select
Check = Check + 1
Loop
End Sub
CREATE TABLES LIKE BELOW?
-----------A----------- ---B---- --C-- --D-- --E-- F
1 US Air - Ground Expense
2 Fuel
3 Week1 Week2 Week3 Week4........................
I have a list of objects:
A
B
C
D
X
D
A
F
G
H
I know how to get a unique list. How do I identify those that are in the list more than once and how many times it is in the list?
I have two spreadsheet in which I am looking for duplicate customer names.
1st - "Customers"
2nd - "Orders"
In column A of my Customers spreadsheet I have the following formula
=IF(ISERROR(MATCH(E2,Orders$D2:D1000,0))=FALSE, "Y","N"). This allows me to see if a name in my Customer spreadsheet (column E is a field of names) is also in my Orders spreadsheet (column D is a field of names). My end results is either a Y indicating a duplicate or a N for no duplicates.
What I am looking to do next is to place in column B of my Customers spreadsheet the date that coincides with the duplicating customer name. Sorry to be confusing. If a customers name is found in the Orders spreadsheet I need to know what date has been given to this customer (column L in the Orders spreadsheet contains the date information).
However, on numerous occasions a customers name is found in the Orders spreadsheet more than once meaning there may be more than one date which needs to be placed in column B of my Customers spreadsheet.
I am working on a formula by it is repeatedly failing.
Based on input 1 which is the month name, I am looking for a formula to identify the position across columns as the starting cell and then the value in input 2 needs to be repeated 12 times from there.
Example:
Input 1 is Apr-14
Input 2 is 51.8
I have columns with month names starting Apr-13 to Mar-15
Since the input 1 is Apr-14, the formula should identify the appropriate column named as Apr-14 and from there it should copy the value (input 2 ) 51.8 for the next 12 cells which is until Mar-15. I have attaches the examples for your quick reference.
I need a macro to identify when cells are >= 90% in a range, and count them. Then put the result in cell Z58. Range is I51,L51,O51,W51,Z51. i.e if all cells are 90% then put value of 5 in cell Z58. Here is code i have that isnt working:
View 3 Replies View RelatedThis should be pretty straight forward but the solution has escaped me so far. I have some formulas that ratably spread monthly budgets across the life of a program. Ocasionally these budget formulas are hard keyed over with a value which overrides the ratable budget formula. I would like to conditionally format all cells that contain hard keyed values so they don't get inadvertently copied to new budget lines.
View 8 Replies View RelatedI regularly import a list of data into Excel containing employee team names, employee names, and (for these purposes, irrelevant) data. The team name is the only data in column I, and therefore I can easily pick this up an summarise it in a lookup. The employee name is always one row above it, and in column D. However, it is not the only data in column D, and each employee's records contain varying numbers of rows. How can I have Excel copy the employee name in to column J, alongside the team name in column I, but ONLY in rows where there is data in column I?
View 3 Replies View RelatedI have a spreadsheet with 20+ columns. Each column contains a list of invoice numbers, eg, 1234. The lists are all of different lengths (see below). I want to find a way to find/highlight/identify those invoice numbers that appear more than once in the entire sheet (eg if invoice 1234 is listed in column B, and also in column H, and/or if invoice 5678 is listed in column A, and also in column J, and also perhaps in column D, etc.)
I've searched this forum but haven't found anything about searching for multiple duplicates in multiple columns. Ideally the matches would be highlighted in different colours, (eg all cells that contain 1234 would be red, those that contain 5678 would be blue, etc., for ease of identification) but I'm not sure if that's possible. I've attached an example that I've shaded myself to show what I mean. I've tried the MODE function but that only tells me which invoice number occurs the most.
I use excel 2007 and need a formula to identify cells that have duplicate values within the same cell. For example, some of my city fields have the city twice, like baltimorebaltimore.
View 6 Replies View RelatedSo here I have two columns Column 1 with repetitive values of some 10000 records Column 2 with unique values of 100 records I want to compare Column 1 and Column 2, identify the values in Column 1 that match with Column 2 and highlight them. Conditional formatting for duplicate values doesnt work because Column 1 has repetitive values.
View 6 Replies View RelatedMacro - it is currently set up to find a specific text, and activate that cell. From there, the spreadsheet has data in 6 cells in the 6 rows below the active cell. What I need the macro to do is to identify the product based on key words in a range of cells: that is, if any of those cells contain the string "total", than the product type is total, but if "total" is not found, look for keywords such as "alpha" and "beta", to identify the product type. If its not a total product, then i want it to look for "productB", "productc", and so on with relevant keywords until the product is identified.
I think IF(ISNUMBER(SEARCH can be used, but I'm not sure how, and I'm not sure how to search all 6 cells (to make things worse, the number of cells vary, so I'm using the "find" function to figure out the first and last cell that contain data).
So I have a bunch of not so simple excel sheets in a Excel file. I'm trying to automate the testing of these (right now, I'm doing the testing manually).
To simplify, let's say there are two sheets - both of them have a cell called "Total" at the end, which is nothing much a total of some column. My test is to check if these two totals are the same. We don't know the number of rows before hand (it is coming from a database). The way I'm doing right now, is searching for the cell containing the text "Total" getting it's row and column, and adding 1 to the column, to get the cell that actually has the total value. Do this for both the sheets, and I have both values, and it's easy to compare now.
If someone changes the text from "Total" to "Totals" then this will fail.
Questions:
1. Is there a better way to do this? Say, setting a unique parameter or something on the cell that actually has the total value, and using that unique parameter to search the cell?
2. Or is there a totally different (better) approach to this type of testing?
I am running a text comparison between customer names in 2 systems and although I can identify where they dont match I would like a bit more information as to what the differences may be:
See below sample data - 1 system may have Mr/Ms and middle initials whereas the other simply has the name is it possible to write a formula that will look at the cell and when it does not match identify the extra characters. Or if it totally doesnt match then just state incorrect.
A
System 1
System 2
Desired Result
Anne Duffy
Anne Duffy
OK
[Code] ...........