If Statement For Between Ranges
Feb 14, 2007
Im sure this is straight forward and I've trid a few times, but I'm not quite getting what I'm after:
I have 3 differnet cells containing the following values 36 (B1), 72 (B2) and 108 (B3)
I want to look at a cell, lets say A1 and if the number is less than or equal to 36, then output, lets say X1
if it is greater than 36, but less than or equal to 72, then outputs X2
and if it is greater than 72 and less than or equal to 108 then outputs X3
I tried this and a number of combinations
=IF(AND(A1>B2,A1
View 9 Replies
ADVERTISEMENT
Aug 27, 2007
I need to be able to give a grade A, B, C or a D by using a range of scores in an IF function for a markbook as part of my IT coursework.
I have had several failed attempts, and this is one of my many formulas that has failed:
=IF(O6<45,"D",IF(O6=$46:$60,"C",IF(O6<$61:$74,"B",IF(O6>75,"A"))))
View 9 Replies
View Related
Jun 11, 2007
how can i compare a range, which may contain multiple cells of the same information ie 1s and 0s with a separate cell, if they match, return a message box?
View 9 Replies
View Related
Oct 4, 2007
clearcontents is clearing some cells outside of the specified range. Some of the cells in row 10, which is above the beginning row of specified range, are also getting cleared. I've tried several variations to no avail.
Here is the code I am using:
Sub ClearDataSheets()
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Dim d1 As Date, d2 As Date
d1 = Date
d2 = Worksheets("FPY").Range("A375").Value
If d1 <= d2 Then
MsgBox ("Resetting the program prior to start of new year is not permitted."), vbExclamation
Exit Sub
Else
View 9 Replies
View Related
Apr 26, 2014
How would i wrte this formula correctly?
=IF(SUM(I5:J26))-(SUM(D5:E26))>=0,0,(SUM(I5:J26))-(SUM(D5:E26)
It needs to say if the sum of the two cell ranges is less than or equal to zero then display as zero, otherwise display the answer
View 3 Replies
View Related
Feb 22, 2009
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
It looks something like this:
View 10 Replies
View Related
Jul 28, 2009
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View 5 Replies
View Related
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Oct 1, 2008
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies
View Related
Feb 14, 2012
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
View 9 Replies
View Related
May 5, 2014
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
View 5 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Jan 6, 2009
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
View 9 Replies
View Related
Mar 7, 2013
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
View 1 Replies
View Related
Mar 18, 2014
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
View 2 Replies
View Related
Jun 13, 2009
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
View 3 Replies
View Related
Apr 25, 2007
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
View 9 Replies
View Related
Jul 3, 2007
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
View 7 Replies
View Related
Apr 22, 2009
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
View 5 Replies
View Related
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
Jul 27, 2014
What I'm trying to have happen is when I enter a cost ($50,000-$240,000) in Sheet 1, I want the fees (cell B2) to correspond to what they are on sheet 2. How should I set up an if statement for this?
View 3 Replies
View Related
Sep 1, 2008
How do I write an if formula for the below example. X = A Week Number. If(X is between 1 and 4,"Y","N").
View 2 Replies
View Related
Oct 13, 2008
Here is what I have right now, =if(i3:i133="MLB"&if(b3:b133="W",c3:c133))
Basically the statement needs to contain two "ifs". I have a column that has MLB, CFB, NFL, etc and a column that designates wins and losses. So, what I am trying to make it do is say if i3:i133="sport" AND if b3:b133="W" then add those up.
View 3 Replies
View Related
Dec 11, 2008
I have a sheet where A2 is machine name A3 needs to put a -1 if A2 is either Machine 1 or Machine 2. I looked and cant find what I need. I know this should be a no brainer but having problems. here is what I have
=IF(A2="Machine 1",-1,"") or IF(A2="Machine 2",-1,"") this doesnt work
I have also tried something I found
=IF(OR(A2="Machine 1",A2="Machine 2"),-1,"")
View 3 Replies
View Related
Jun 11, 2009
How do i say if x is not equal to #value! in a formula? In the context of...@search() returns #VALUE! when the search string is not found. So: =OR(SEARCH("price",$A4) **NOTEQUALTO#VALUE!** ,SEARCH("pricing",$A4) **NOTEQUALTO#VALUE!**)
View 5 Replies
View Related
Sep 8, 2009
=IF(ISBLANK(G9) or ISBLANK(H9),"",(G9+H9)/F9)). How can I get the above if statement to work?
View 4 Replies
View Related
Jan 5, 2010
If d6 and d7=0 then put 0 but if one of them contain any other value then roundup as below based upon the cell with the different value. I current have this formulae:
=IF(Parameters!D6=0,0,ROUNDUP((Parameters!D6*1000)/Parameters!D11,0))
View 3 Replies
View Related
Aug 19, 2008
I am trying to do and IF within an IF like i could do in java. Although i unsure now to whether this can be done within VBA and whether the syntax i am using is correct.
The situation is that i have to two cells with a list of information within them both.
For example cell (2, B) has options 1, 2 and 3 & cell (3, B) has options a, b and c.
If option "1" is selected then either option "a", "b" or "c" can be selected that will therefore show different information in another cell within the worksheet.
View 13 Replies
View Related
Nov 30, 2008
I want to create code that will check if a number of cells is empty and if they are to call a sub. If any of the cells are not empty then call another sub.
View 11 Replies
View Related