I have two sub-system tabs (IAS & CCTV) and one calculations page (estimate). I need G3 (estimate) to give me the total price of hours sold on a project.
Because the systems hours can be marked up differently I wrote an average formula. But I need to add an IF statement saying if there is no hours in the sub system then ignore the hour price.
if this formula doesnt take this into account and I delete H3 (CCTV tab) then the overall price of hours sold in estimate will be wrong.
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I am trying to perform a count statement in VBA as below, with the 1st Evaluate I get the correct response, however with the second option it shows a 0. The variable is obtaining the correct values as per the example of 6017Complete, this is proven with the MsgBox
VB: Dim TillNo As String TillNo = Target.Offset(, -1) & Target.Offset(, 0) & "Complete" MsgBox "Till Number is" & TillNo Target.Offset(, 10) = Evaluate("COUNTIF(C3:C123,""6017Complete"")") Target.Offset(, 11) = Evaluate("COUNTIF(C3:C123,TillNo)")
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
Im having a problem finding a formula that will count and take an average of multipul ifs.
On sheet 1 of the attached file is multipul queries raised for us to answer. On sheet 2 is an empty table which i would like help formulating.
In the Submission Lag Time Column i would like a forumla that looks down Column L on Sheet 1 and gives me an average for the amount of days a query has been with us from each company (column B) per month (going off the dates in column D).
I the same formula will be used for the other 3 columns, put looking down a different column on sheet 1.
I want to figure a class average for a test, but I have students that have moved. My Excel is automatically counting them as a zero. How can I program/tell Excel to skip any blanks rather than count them in the average?
I am trying to make a excell spread sheet that will calculate my students averages for the year. I need to account for zeros in the coarse and I want this excel sheet to track the current average all year long . So I do not need to include my blanks in the average as I go. Also , how do I formulate my average accum to show this formula - Test scores, four of them count as 80% of the total grade. So each test is worth 20% / Lab 10% of total grade and homework is additional 10%. I downloaded the templete from MSN and have tweaked it to my liking except for the coding above. Please advise. I am a below par on Excel. My attachemtn is below of my templete. One note. the templete gave me the room to include 13 ros of homework - but I will not necessarily use all of them... I can make it one row for home work only ....
i am using the IF script, and i am also using the COUNT script in the logical part of the IF statement. i need to make sure that both K3 and V3 have a value inside of the cell in order for the statement to work, although when just K3 has a value, the IF - TRUE statement works anyway. any ideas on how to fix this? =IF(COUNT(K3,V3),SUM(K3+V3),"")
I have a spreadsheet that contains developer related data. I want to be able to do a weekly analysis of average construction time and costs. The problem I am running into is properties enter rehab phase and exit rehab phase throughout the week.
For example:
I want to know the average $ spent and total rehab time week 1 of april. I may have 4 homes that entered rehab that week and 3 that move out of rehab that week. Moreover, I need to ensure those homes that entered and are still in rehab for that week are counted. How do I accomplish this feat?
Say i want to count the average from differnet selected cells say
cell A1,B4,C9,D10,E12
and some of the cells have the value 0 in them, so i don't want the formula to include these as long as they have the value 0.
I have tried to divide with a sumproduct and i can get i to work if it is cells next to each other like A1:A20, but not if i want to do it with different selected cells
I've got a spreadsheet that I do every month with columns of numbers that I average. This sheet has to match about 10 others similar. The columns are divided by Weekdays, Saturdays, Sundays. But some months there are no entries for certain cells on Saturday or Sunday.
I thought that if I just used the Average function, it would dismiss and not count the blank cells. Alas, apparently not. I've highlighted in yellow the one column that I'm really having trouble with.
I am trying to calculate the average headcount for different categories (over a certain period of time, by product, by job type etc) and I want to do it using a formula instead of a pivot table.
I have this set of data with a detailed headcount for every month. And I can find out the total HC for different categories using sumif/sumifs but if want to find out the average for a certain period, I need to split that total to the number of months where I have a HC.
For example, if the HC per month would be:
May 2013 - 12 June 2013 - 10 July 2013 - none August - 5
in a 4 months period I would have a total HC of 27 and the average would be 9 (27/3 - July shouldn't be counted). How can I get the average in a single formula?
I am working on a Productivity Log and can't figure out a way to count unique values, and also average the time per assignment.
Assignment with the action code A - should take 2 hrs to complete, all other action codes should take 20 minutes.
I need to show how many of each action codes were done for the day, and what was the average time taken to complete each. Even better, how much for A action codes, and how much for all other.
The data: There are a number of columns, but we'll use the first 2 first. Column A has the dates from 1/1/2009 to 12/31/2009. Column B will has numbers, mainly 0-100. One cell will have a 'report date' which is just a date.
The formula needed: I have a few cells labeled wk1, wk2, wk3. Week 1 will start with the 'report' date. wk1 I would like the Average of Column B IF the dates in Column A are within the 'wk'. wk1 = report date TO report date + 6. wk2 = report date + 7 TO report date + 13 and so on.
My goal is to have the formulas all set so that when we move to another report date and the raw data is added, I can just change the 'report date' and everything (the wk numbers) will automatically update with the new raw data.
The furthest I got was this, but it didn't work. =AVERAGE(IF('A3:A33>=VALUE(D3)
I need to monitor the average daily usage of a liquid tank for a customer. We fill this tank every few weeks. The formula I am looking for would ignore the fills and just count the daily usage.
sumif problem but it wont work with a countif or average if.
Column A has various names and Column B has amounts, what I need is to count the number of occurances "John Smith" has an amount in Column B. The previous formula I tried was
=sumif(A:A,"John Smith",B:B) but with either countif or averageif it errors too many arguements.
I wasn't sure if Dcount or an array would be suitable but have not used them before.
Pivot tables I'm sure will be the future with this but haven't got to the foot of that mountain yet.
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code: tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code: TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click() Dim Row As Range Dim FinalRow As Long Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range Application.ScreenUpdating = False
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code: Sub testInsert() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code: Sub testSelect() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim mrs As New ADODB.Recordset Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this: 9 8 7 6 5 4 3 2 15 14 13 12 11 10 1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv) If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
