I have a macro that create the page header (and footer), which uses a jpg image/logo from my computer. How can I incorporate that into the code so that the macro/image will work properly if not run on my computer?
View 1 RepliesI'm trying to incorporate a Cell result in my header (the one you select from "Page Setup"). Is this possible? I would like to avoid macro if possible and prefer some type of formula.
Windows XP with Excel 2007
I would like to insert a picture into excel header saved in a word doc however, when I select insert picture option it doesnt seem to work?
View 5 Replies View RelatedIn Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
View 1 Replies View RelatedI want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice
View 6 Replies View RelatedI have the following worksheet ,named "Calendar", to make an annual calendar and I'm wondering if there's a way to use it to make a calendar in worksheet named "NovemberDaily". On the worksheet named "NovemberDaily" I want to put in cells C14, G14, K14, O14, S14, W14, and AA14 "11/1/2007" if the weekday of the week matches the date"11/1/2007". Is this possible or is there an easier way of accomplishing this. I'm needing the date (e.g. 11/1/2007) in the cells mentioned because it ties into another formula that I'm using later in the worksheet.
View 32 Replies View RelatedIs there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI am using a script within excel as part of this script I want create a new folder to store information
Code:
ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL2011-12"
However I want to use a variable called "NEWYEAR" which holds the 2011-12 part
For example this part stays the same
ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL
folder 2011-12 held in variable NEWYEAR may or maynot exist.
if the folder exists I want to be able to use the folder, however if it doesn't I need to create it.
The problem is I am not sure how to incorporate the variable into the path.
I would like to incorporate a series of if statements in column D of my macro that looks at the labels in column C. If the label is 10 characters long, it returns the full 10 characters. If the label is 11 characters long, it returns the leftmost 10 characters.
What syntax would work for this?
Last Name
First NameSales CodeDepartmentSalesHours WorkedBase PayCommission RateAllbaughJoshuaAMMen's$ 4,000.00 8.00188.0072
I created this formula to show commission but it doesn't incorporate the array below.
How can I incorporate a vlookup into the formula above showing this array of info?
Sales CodeSales TitleHourly Wage QuotaCommision RateAMAssistant Manager$23.50 $200.00 0.03PT1Sales Assistant$10.50 $100.00 0.01PT2Sales Partner$11.75 $125.00 0.015S1Sales Associate$13.50 $150.00 0.02S2Sales Consultant$15.00 $175.00 0.025
I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
Is there a way to include an if then else function to an average formula that will skip cells with zero?
I went into better detail in the attached example.
I have this nested if statement, but my last IF statement needs to incorporate another component.
View 2 Replies View RelatedI need to often enter a formula such as:
=SUMIF(H1:H500,"=a",G1:G500)
but, I need to change the variable 'a' to whatever letter I need.
I wrote the following:
y = InputBox("Enter letter")
So, how do I incorporate the 'InputBox' result in the formula?
If I use =SUMIF(H1:H500,""=x"",G1:G500) I just get 'x' as a result, not the letter I input.
I am trying to incorporate several IF statements into a single formula:
=IF(AB5<20,"LR",IF(AND(AB5<30,AB5>25),"C",IF(T5<>"","CLEAR",IF(AND(AB5<240,AB5>40,AA5=1),"B-T1-F10",""))))
What I am trying to achieve with this formula is:
- insert LR if AB5 is less than 20;
- insert C if AB5 is less than 30 but more than 25;
- if neither of the above is true, insert CLEAR if T5 contains something and if not insert B-T1-F10 if AB5 is between 240 and 40 and AA5 = 1.
The problem I have is that the B-T1-F10 is not being inserted where the other criteria are not met so I think I have not integrated the statements correctly?
I have have sumproduct formula that works well, however I need a section of it to use a condition.
"=SUMPRODUCT(--(('Input Sheet'!$A$10:$A$20009=3)+('Input Sheet'!$B$10:$B$20009=1)+('Input Sheet'!$C$10:$C$20009=1)=3),--('Input Sheet'!$L$10:$L$20009>=G21),--('Input Sheet'!$L$10:$L$20009<=J21))"
The first section ('Input Sheet'!$A$10:$A$20009=3) looks at column of data and checks if any of the data says 3, however I need the formula to look at the column of data and determine if the figure is =>3 and also =<5.
I have the following formula: ...................
and excel is saying I used too many characters and to use the concatenate function to do so, but I have no idea how.
I wanted to return text rather than a '0' in the case that all the original IF statements were false, I threw another IF statement in there and said if the original is equal to '0', then return "-". If not, then run through the original again (I pasted the original again after the "-").
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
How to incorporate a calculated field for a sub group.
Here's what the data in the table looks like.
Competitive
Managed
ID
A
B
C
A
B
C
[Code] .....
I am looking to get 3 calculated fields onto the Right hand side that would essentially be the following Formula
=IF(L4"",IFERROR(D4/H4,"n/a"),"")
Thus,
1st Column
=IF(Competitive(A)"",IFERROR(Competitive(A)/Managed(A),"n/a"),"")
2nd Column
=IF(Competitive(B)"",IFERROR(Competitive(B)/Managed(B),"n/a"),"")
3rd Column
=IF(Competitive(C)"",IFERROR(Competitive(C)/Managed(C),"n/a"),"")
The other option would be how to set up conditional formatting to always take on the appearance of Column K of the pivot table. Thus, this calculated section would always appear as though a part of the pivot table and would adjust based on any pivot table items being expanded and collapsed.
i have saved some pictures in my excel sheet.
in the next sheet i want that when i write the picture name the picture will appear as vlookup helps in the getting text and nos. can i do this with pictures or i tried to get to much from excel.
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
I am putting together a price list in excel and using images and hyperlinks to jazz it up a bit - what I am finding is that if I insert a 25KB GIF image, the excel file grows in size by over 100KB
why is this disproportionate growth happening and is there a way around it - I dont want my Price List growing too large but need the images....?
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
I want to paste/show a photo in a particular cell (D2) on a worksheet (called PP). I wish to delete any photo that may already be there in D2.
The picture's name (e.g. J-145.jpg) will be found in another sheet (called MP) in cell H1.
My pictures are stored in a folder (lets call it c:pictures) and the one I want has the same name (J-145.jpg).
I've tried many macros but none work.
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5)
b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5)
b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
i m working on a mechanical project , I need to do some modifications to my XLS file that i aint familair with.
http://aycu36.webshots.com/image/348...0572870_rs.jpg
I have a booklet I want to print from Excel 2000. I'm not seeing how to have the HEADER on page one only. The header is coming up on all pages. Is there a way to tell Excel to print the Header on page one only?
View 2 Replies View RelatedI have several pictures on a graph sheet (i.e. imported cliparts) which I am using as a key to describe outcomes. I also have a blank picture box which I want to show each of the key pictures depending on a certain value in a cell on another sheet.
In Picture1 i want: fx = If(sheet1!A1 = "Red",Picture2,Picture3)
If I had a series of pictures in a worksheet, how could I give them a value so I could use the vlookup function?
View 14 Replies View Related