I need to often enter a formula such as:
=SUMIF(H1:H500,"=a",G1:G500)
but, I need to change the variable 'a' to whatever letter I need.
I wrote the following:
y = InputBox("Enter letter")
So, how do I incorporate the 'InputBox' result in the formula?
If I use =SUMIF(H1:H500,""=x"",G1:G500) I just get 'x' as a result, not the letter I input.
I'm trying to incorporate a Cell result in my header (the one you select from "Page Setup"). Is this possible? I would like to avoid macro if possible and prefer some type of formula.
Windows XP with Excel 2007
I am trying to open a workbook with
Workbook.Open filename:="xxxxx"
The address in the xxxx is something like this "G:AnimalMammalZZZZGorillayyyy.xls"
The ZZZZZ portion is the result of an InputBox.
What is the syntax for placing the result of that InputBox in the middle of the address?
Last Name
First NameSales CodeDepartmentSalesHours WorkedBase PayCommission RateAllbaughJoshuaAMMen's$ 4,000.00 8.00188.0072
I created this formula to show commission but it doesn't incorporate the array below.
How can I incorporate a vlookup into the formula above showing this array of info?
Sales CodeSales TitleHourly Wage QuotaCommision RateAMAssistant Manager$23.50 $200.00 0.03PT1Sales Assistant$10.50 $100.00 0.01PT2Sales Partner$11.75 $125.00 0.015S1Sales Associate$13.50 $150.00 0.02S2Sales Consultant$15.00 $175.00 0.025
Is there a way to include an if then else function to an average formula that will skip cells with zero?
I went into better detail in the attached example.
I am trying to incorporate several IF statements into a single formula:
=IF(AB5<20,"LR",IF(AND(AB5<30,AB5>25),"C",IF(T5<>"","CLEAR",IF(AND(AB5<240,AB5>40,AA5=1),"B-T1-F10",""))))
What I am trying to achieve with this formula is:
- insert LR if AB5 is less than 20;
- insert C if AB5 is less than 30 but more than 25;
- if neither of the above is true, insert CLEAR if T5 contains something and if not insert B-T1-F10 if AB5 is between 240 and 40 and AA5 = 1.
The problem I have is that the B-T1-F10 is not being inserted where the other criteria are not met so I think I have not integrated the statements correctly?
I have have sumproduct formula that works well, however I need a section of it to use a condition.
"=SUMPRODUCT(--(('Input Sheet'!$A$10:$A$20009=3)+('Input Sheet'!$B$10:$B$20009=1)+('Input Sheet'!$C$10:$C$20009=1)=3),--('Input Sheet'!$L$10:$L$20009>=G21),--('Input Sheet'!$L$10:$L$20009<=J21))"
The first section ('Input Sheet'!$A$10:$A$20009=3) looks at column of data and checks if any of the data says 3, however I need the formula to look at the column of data and determine if the figure is =>3 and also =<5.
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5)
b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5)
b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedI have the following worksheet ,named "Calendar", to make an annual calendar and I'm wondering if there's a way to use it to make a calendar in worksheet named "NovemberDaily". On the worksheet named "NovemberDaily" I want to put in cells C14, G14, K14, O14, S14, W14, and AA14 "11/1/2007" if the weekday of the week matches the date"11/1/2007". Is this possible or is there an easier way of accomplishing this. I'm needing the date (e.g. 11/1/2007) in the cells mentioned because it ties into another formula that I'm using later in the worksheet.
View 32 Replies View RelatedI have a macro that create the page header (and footer), which uses a jpg image/logo from my computer. How can I incorporate that into the code so that the macro/image will work properly if not run on my computer?
View 1 Replies View RelatedI am using a script within excel as part of this script I want create a new folder to store information
Code:
ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL2011-12"
However I want to use a variable called "NEWYEAR" which holds the 2011-12 part
For example this part stays the same
ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL
folder 2011-12 held in variable NEWYEAR may or maynot exist.
if the folder exists I want to be able to use the folder, however if it doesn't I need to create it.
The problem is I am not sure how to incorporate the variable into the path.
I would like to incorporate a series of if statements in column D of my macro that looks at the labels in column C. If the label is 10 characters long, it returns the full 10 characters. If the label is 11 characters long, it returns the leftmost 10 characters.
What syntax would work for this?
I have this nested if statement, but my last IF statement needs to incorporate another component.
View 2 Replies View RelatedI have the following formula: ...................
and excel is saying I used too many characters and to use the concatenate function to do so, but I have no idea how.
I wanted to return text rather than a '0' in the case that all the original IF statements were false, I threw another IF statement in there and said if the original is equal to '0', then return "-". If not, then run through the original again (I pasted the original again after the "-").
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
How to incorporate a calculated field for a sub group.
Here's what the data in the table looks like.
Competitive
Managed
ID
A
B
C
A
B
C
[Code] .....
I am looking to get 3 calculated fields onto the Right hand side that would essentially be the following Formula
=IF(L4"",IFERROR(D4/H4,"n/a"),"")
Thus,
1st Column
=IF(Competitive(A)"",IFERROR(Competitive(A)/Managed(A),"n/a"),"")
2nd Column
=IF(Competitive(B)"",IFERROR(Competitive(B)/Managed(B),"n/a"),"")
3rd Column
=IF(Competitive(C)"",IFERROR(Competitive(C)/Managed(C),"n/a"),"")
The other option would be how to set up conditional formatting to always take on the appearance of Column K of the pivot table. Thus, this calculated section would always appear as though a part of the pivot table and would adjust based on any pivot table items being expanded and collapsed.
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View RelatedI have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))
Is there an issue with the formula or some setting in excel?
I have a workbook consisting of 4 worksheets. Cell B5 in each of three of these sheets has the exact same formula (copy/pasted) referring to data in the other worksheet. In one of the three similar sheets cell B5 shows up as a blank. In the other two, this cell shows up as a zero.
Since the formula in each of these cells is identical, I figured the difference in the way the result showed up was a matter of cell formatting.
The cell format for each of the three is indicated as ‘general’. However, with one of these, the ‘sample’ shown when you view the cell format shows as a blank while the other two show the ‘sample’ as a zero (0). How can I go about making all three cells appear the same, namely a blank?
I have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30
the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.
Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???
Here is an example...
In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:
=IF(B1>0;((A1)*(B1)*0.15);0)
At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
Column B is basically 550 points + column C = Base Roll.
We need to introduce a cap so no more than 1000 points can be displayed/earned. So column G adds all points & column F caps.
So far it's all ok.
Now when i add a value to column E (points spent) those points are deducted from column G instead of the capped 1000.
Entering a value of 500 displays 800 in column F instead of 500.
I have a formula that returns a string using the concatenate function. Now I want to copy the string to another cell without copying the formula. The string will become a record in a CSV file. I cannot figure out how to make what shows on the screen a label cell instead of a formula cell.
View 3 Replies View RelatedHow do you write a code that will calculate a formula and output the result in a cell?
For example:
A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3
Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.
Any way to convert a cell result into value if it meets the criteria or else the formula stays in place
I have same formulas from cell Q17 to Q1000 some of those cell will have different results based on manual inputs that occur daily.
I would like the formula result to convert to value only if greater than -1000 or else keep the formula in place to continue future calculations till it meets the criteria.
I have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.
View 4 Replies View Relatedcopying a formula. Basically i want to paste special a formula result automatically.
I have a if function set up so when 2 days corespond then in the 3rd cell it records the value, however when ever the date changes the value disappears, i can keep the value u there by paste special but i would love to set this up as an automatic thing once a value is recorded it records the value and deletes the formula, or the value doesnt change when the date (thus the condition) changes...