Increase Current Cell ONLY When Different Than Target Cell
Jul 27, 2007
I am looking for a way to avoid the circular reference issue. I would like to monitor a cell that is being incremented and decremented so that I can automatically retain the highest and the lowest values that were entered into that specific cell over time. Since the data is only entered into that specific cell and not retained in for example a column, the MAX/MIN option is not usable in this case.
More simply stated, is there a way to put a formula in a specific cell ( A1 ) that will equal the target cell ( B1 ) only when that target cell ( B1 ) is greater than A1?
I am trying to figure a formula that will give me a monthly increase with a annual target. Example:
2006 sales were $100,000 and December 2006 sales were $9,000.
For 2007 I would like a 10% increase in sales which means I should end up with $110,000 at the end of 2007.
The formula should figure a gradual sales increase each month until December 2007. I am assuming the business sales trend is upward with no seasonality so that January 2007 should be the annualized increase over December 2006. . I have used the formula =100000*((1+.1)^(1/12)-1) which works for 2007, but it gives me a large jump between December 2006 and January 2007 and then a slight increases each month.
I don't know if title is understandable, English not being my tongue, anyway here's my problem, the current value must be increased or decreased by 0.01 if it's between 1 and 2, by 0.02 between 2 and 3 and so on. I'm really new to VBA and after a few hours I came up with the following code which works fine till the value of 6 and then gets stuck: ....
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code: Sub CopyData() Range("I2").Copy Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues End Sub
Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$I$2" Then Call CopyStuff End If End Sub
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub If Target.Address(False, False) = "C2" Then Range("F2").Value = Range("F2").Value + 1 End Sub
I am using the follow macros code when I right click my spreadsheet and enter it in the window there. My intention is to increase the value in F2 every time the value in C2 changes to a specific text value. For instance, if C2 has the value "Alex" I want F2 to increase by 1 every time C2 changes to say "Joe" and only Joe. If it changes from Joe back to Alex that does not need to be counted, only changing it to Joe needs to increase the value in F2 by one each time.I also need to do this for all values in the spreadsheet from C2-C59 and increasing the corresponding cell in F2-F59.
I need to be able to get the color of my target cell (the target could be in red green or blue - background or foreground color could be used) - I realize this requires the use VBA, which I know nothing about - I want to find the color NOT change it or manipulate it in any way
if it is possible to increase one cell by 1 when the date was changed in another cell. I installed the code that was given to me and it worked perfectly, thanks agin JB and royuk, UNTIL the cell that was to increase by 1 was locked and the sheet protected.
I need to increase the cell value on a spreadshhet that contains over 50,000 cells. I know how to do this on a cell by cell basis. I need to know if there is some way of doing this to multiple cells. Here is my example;
$603 $712 $649
I need to increase each cell value and roundup to the next number. I have been doing the following formula: =ROUNDUP(603/.97,0) to increase the cell value to $622.
Objective: * I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide * I want to paste 10 rows of this information * AddressStart will be a variable address such as B2, B10, B1000
Here is my current code (which fails on copy/paste):
Code: For NewRows = 1 To 10 WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0) Next NewRows
Questions: 1) How do I set the relative reference to set the size of width of the row to be pasted? 2) Is it possible to refer to the end of the row (far right)
In Cell A1 if 0 is entered, it puts a diagonal line through the cell
If in Cell A1 anything other than a 0 is entered, then the the diagonal disappears.
I would like however for the code to recognize that if the cell is blank then to put a diagonal line through the cell as opposed to entering a 0. The code is listed below:
*The code below also does what is described above for cell A2* _______________________________________________________
Private Sub Worksheet_Change(ByVal Target As Range) Select Case Target.Address
Case "$A$1" If Target.Value = 0 Then Target.Select With Selection.Borders(xlDiagonalUp) .LineStyle = xlContinuous .Weight = xlThin .ColorIndex = xlAutomatic End With
I'm trying to make up a sheet that will be able to cope with users pasting in data from other sources. I thought simply running a TRIM function on any data entered in the target cell would be enough, but I've realized that many of the "space" looking characters are not really spaces and don't get trimmed. I've searched around here, but can't find a definitive answer... What can I use in VBA to trim anything that isn't a-z or 0-9 from around data that's entered or pasted in?
Is it possible to have a cell increased by 1 and another decreasing by 1 in a simple cell formula.
E.g.: I have an inventory stock sheet that is very simple. I have a maximum stock column C, a stock on hand (available) column A and a stock sold column B.
Every time I sell an item and punch it into column B it should automatically decrease the amount in column A by the number that I punch into B.
I am not concerned about the maximum stock column but would like an easy formula just to work out the amount that I have available so I know when to order more stock.
So when I punch in a 5 on B2 it should decrease the value of A2 to 1. And when I purchase stock again and I punch in say a 5 on A2 it should decrease B2 to a 1.
How can I get one cell to increase by 1 after I change the date in another cell. The spreadsheet is used to keep track of Oxygen Bottles at the local Fire Dept. and I want the " Times Filled" cell to increase by 1 after the " Date Filled" cell is changed. I'm not sure if they key the date in or if they use a calender add-in pop up.
I would like to know if there is a way to expand the selection of cells from the current cell you are on to the very bottom cell available in the spreadsheet.
For example, I want to apply a formula from A12 - the very last A cell row in the spreadsheet.
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
I have a spreadsheet at work . I am tracking the quality target for the department and I need to create a formula that adjust accordingly to the target set for month end which is 90%.
I have build in the foreacasted numbers for the whole month but I need the formula to indicate the minimum error points needed to achieve the target of 90% for month end when I replace the forecasted numbers on a daily basis with actual numbers.
I have attached the spreadsheet which will be clearer.
I created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
I'm a novice at macros and spreadsheets and a Visual Basic Virgin!!.
I'm trying to work out how to increase a cell (B17) value from 1 through 5 then jump back to 1 and count to 5 again etc etc.
The value should be incremented every time cell B33 ="Yes" however there needs to be a 2nd event which resets the B33 trigger to operate again. This is when cell B34 shows "New Race"
