Increase Cell By +1 To Previous Cell?
Jan 31, 2013trying to get number value to increase by 1 in the cell previous descending down a column.
View 9 Replies
ADVERTISEMENT
Conditional Format To Mark Increase From Previous Column
Sep 5, 2013I have a goal set for the year. With conditional formatting, each month will be set to either red or yellow based on where it stands in relation to the goal. I would also like to show an increase or decrease in productivity for each month. I tried to use conditional formatting with the formula:
=IF(C2=D2, "", IF(C2<D2,"↗","↘")).
The formula works on its own without the conditional formatting so I am not sure what I am doing wrong. I've attached a sample with all the conditional formatting and formulas in place.
Increase That Amount By A Percentage Identified In Another Cell And Display The Value Only Without Any Formalas In A New Cell
Jan 19, 2009If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
Increase Current Cell ONLY When Different Than Target Cell
Jul 27, 2007I am looking for a way to avoid the circular reference issue. I would like to monitor a cell that is being incremented and decremented so that I can automatically retain the highest and the lowest values that were entered into that specific cell over time. Since the data is only entered into that specific cell and not retained in for example a column, the MAX/MIN option is not usable in this case.
More simply stated, is there a way to put a formula in a specific cell ( A1 ) that will equal the target cell ( B1 ) only when that target cell ( B1 ) is greater than A1?
Copy Cell To New Cell If Previous Cell Condition Met
Mar 25, 2013formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
Populating A Cell With A Calendar Month Based On The Previous Date In Another Cell.
Jan 9, 2010Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
Copy Data From Cell Only If Previous Cell Has Specific Text In It?
Mar 7, 2014I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
Adding Timestamp And Username To Cell After Previous Cell Edited
Apr 24, 2014Trying to get a record of who authorized spending in one of my worksheets and when they did it
I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.
I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.
Copy Formula From Previous Cell To Next Cell When I Enter Something
Sep 9, 2007I want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e
--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5
Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.
I have also attached example file.
How To Increase Value Of A Cell When Another Cell Decreases
Apr 20, 2014I am struggling to create a formula to make a cell increase in value as another decrease. For example
Starting information
Cell 1 is 8
Cell 2 is 10
Cell 3 is 10
For each 1 that Cell 1 decreases, I need cell 2 to increase by the value of cell 3 plus 10% of cell 3.
For example Cell 1 has decreased by 1, therefore Cell 2 equals the value of (Cell 3 plus 10% of Cell 3)
Cell 1 is 7
Cell 2 is 11
Cell 3 is 10
For example Cell 1 has decreased by 2, therefore Cell 2 equals the value of (Cell 3 plus 20% of Cell 3)
Cell 1 is 6
Cell 2 is 12
Cell 3 is 10
For example Cell 1 has decreased by 3, therefore Cell 2 equals the value of (Cell 3 plus 30% of Cell 3)
Cell 1 is 5
Cell 2 is 13
Cell 3 is 10
Increase Cell By 1 If Another Cell Changes A Value Using Macros
Dec 8, 2013Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "C2" Then Range("F2").Value = Range("F2").Value + 1
End Sub
I am using the follow macros code when I right click my spreadsheet and enter it in the window there. My intention is to increase the value in F2 every time the value in C2 changes to a specific text value. For instance, if C2 has the value "Alex" I want F2 to increase by 1 every time C2 changes to say "Joe" and only Joe. If it changes from Joe back to Alex that does not need to be counted, only changing it to Joe needs to increase the value in F2 by one each time.I also need to do this for all values in the spreadsheet from C2-C59 and increasing the corresponding cell in F2-F59.
If Condition:one Cell Is Greater Than Previous Cell By At Least A Certain %?
Apr 29, 2009how to include a condition in the condition? What I mean is in this set of numbers:
1000(A) 1000(B) 1000(C) 1200(D) 500(E) 1000(F)
I want excel to point out (with a 1, True, x, whatever) if (B) is greater than (A) by 10% or more and if (C) is greater than (B) and so on. I know I cant use =if(C>B,1,0)...Im just unsure how to include the % in the function
Can I Get One Cell To Increase By 1
Feb 10, 2009if it is possible to increase one cell by 1 when the date was changed in another cell. I installed the code that was given to me and it worked perfectly, thanks agin JB and royuk, UNTIL the cell that was to increase by 1 was locked and the sheet protected.
The date cell is not locked.
Increase Cell Value
Jun 6, 2006I need to increase the cell value on a spreadshhet that contains over 50,000 cells. I know how to do this on a cell by cell basis. I need to know if there is some way of doing this to multiple cells. Here is my example;
$603
$712
$649
I need to increase each cell value and roundup to the next number. I have been doing the following formula: =ROUNDUP(603/.97,0) to increase the cell value to $622.
Increase One Cell By Decreasing Another
Jun 12, 2014Is it possible to have a cell increased by 1 and another decreasing by 1 in a simple cell formula.
E.g.: I have an inventory stock sheet that is very simple. I have a maximum stock column C, a stock on hand (available) column A and a stock sold column B.
Every time I sell an item and punch it into column B it should automatically decrease the amount in column A by the number that I punch into B.
I am not concerned about the maximum stock column but would like an easy formula just to work out the amount that I have available so I know when to order more stock.
So when I punch in a 5 on B2 it should decrease the value of A2 to 1. And when I purchase stock again and I punch in say a 5 on A2 it should decrease B2 to a 1.
****A* B *C
1 *2 *4 *6
2 *4 *2 *6
3 *8 *6 *14
4 *0 *6 *6
Get One Cell To Increase By Digit One
Jan 10, 2009How can I get one cell to increase by 1 after I change the date in another cell. The spreadsheet is used to keep track of Oxygen Bottles at the local Fire Dept. and I want the " Times Filled" cell to increase by 1 after the " Date Filled" cell is changed. I'm not sure if they key the date in or if they use a calender add-in pop up.
View 5 Replies View RelatedIncrease Cell Range By 1 Every Day
Jan 28, 2009I'm trying to sum a range in Column AB that increases by 1 cell every day.
Specifically, Jan 1 will be AB1, Jan 2 will be SUM(AB1+AB2), Jan 3 will be SUM(AB1:AB3)...and so on...Dec 31 will be SUM(AB1:AB367).
If it helps, the dates of the year run from A2:A367.
How To Increase Cell Info Incrementally
Dec 7, 2010I created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
Percentage Increase Or Decrease From Cell
May 2, 2012I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
How To Add + Or - Button To Increase / Decrease Value In Cell
Sep 21, 2013I have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
Increase A Cell Value By 1 If Another Displays "yes&quo
Apr 2, 2007I'm a novice at macros and spreadsheets and a Visual Basic Virgin!!.
I'm trying to work out how to increase a cell (B17) value from 1 through 5 then jump back to 1 and count to 5 again etc etc.
The value should be incremented every time cell B33 ="Yes" however there needs to be a 2nd event which resets the B33 trigger to operate again.
This is when cell B34 shows "New Race"
Formula To Increase Cell Reference
Apr 8, 2008I have to reference to another sheet a fixed increase of moving 6 rows across. What would be the formula for it?
For example.
First formula would be =Sheet1!A1
What would be the formula for the subsequent cells. (eg. =Sheet1!A1+6) obviously doesn't work.
VBA Increase The Decimal Places Of A Cell
Jul 27, 2007Is there a function in VBA that lets me increment or decrement the number of decimals of a particular cell? let's say i got a cell value of 7.123456 but excel only displays 7 on the cell. What if i want excel to display only 7.123? How can I specify the number of decimals i want on a particular cell (in this case 3)
View 2 Replies View RelatedIncrease Percent In Cell If Other Cells Contain Data?
Oct 24, 2013I'm trying to track how complete a project is by checking if cells contain data, and if they do the percent in cell 'Y4' would increase.
I have 6 cells which represent milestones and if they contain data then they would add a certain percent to cell 'Y4'.
Cells B13 & R13 would have a weight of 15% each
Cells J13, J21 & J30 Would have a weight of 20%
Cell L34 would have a weight of 10%
Is there any way that if these cells contained any data that I could add that percent to the total in 'Y4'?
Macro To Increase And Decrease Cell Number
Apr 28, 2012I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
Macro Increase Row Value Of Cell Reference By Increments Of 1
May 9, 2012i'm looking for a loop macro to perform the following task:
Sheet 2 is my look up table, and sheet 1 as a number of references such as:
='Sheet 2'!B1
='Sheet 2'!E1
='Sheet 2'!G1 etc
I need a macro that increases the row references "1" to "2", saves the sheet then increases "2" to "3" and so on until the bottom of the reference table is reached
Use Macro To Increase Cell Content 10 Points
Nov 17, 2007I don't know if I am asking for something impossible,but is it possible to create a MACRO to automatically add or subtract 10 to whatever number is in the cell? for example:
A1= 20
I would like to have a macro that lets you either add 10 to it to become 30 or subtract 10 to it to become 10.
On Today()+1 Increase Date In Cell By 1 Month
Aug 22, 2008I have 22-08-08 in Cell A2 I would like it to change to 22-09-08 on 23-08-08 ideally using edate (but not neccessarily).
Perhaps I can add a formula with conditional formatting eg formula is = "On Today()+1 Add 1 month to cell A2"
Change Cell Color After Every Decrease Up To Increase
Nov 15, 2009I have a 49 numbers in cell A1:AW1 they are not in acceding order. I want to separate all groups’ start from lowest number to highest giving them deferent color. As shown in example table below in cell (A2 start with nº 6 and increase up to nº 47 till cell F2 =yellow color) then Cell (G3 decrease nº 3 and increase up to nº 49 till cell L49=Green Color) and continue same process for rest ....
View 9 Replies View RelatedAutomatically Increase Weekday Dates By Value Of Cell
May 8, 2009I have a range (M6:BM6) which consists of week end dates = every Friday (M6 =
5/8/09; BM=5/7/10). I would like to have the range adjusted based on when a
cell (B3) is updated. For example, currently B3=5/5/09 and M6=5/8/09 (week
end date of B3). If B3 was updated to 5/12, I would like to have the range
automatically updated to M6=5/15/09, N6=5/22/09....BM=5/14/10. I could do
this with excel formulas in the sheet but would like to macro code adjust the
values in the range rather than formulas.
These ranges are used in other macros and works better with values rather than formulas.