I need to be able to get the color of my target cell (the target could be in red green or blue - background or foreground color could be used) - I realize this requires the use VBA, which I know nothing about - I want to find the color NOT change it or manipulate it in any way
View 9 Replies
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies View RelatedIs it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
View 2 Replies View RelatedI have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
View 2 Replies View RelatedEvery time I think I've got this thing beat, they throw another curve at me!
If cell Q19 is blank, leave target cell blank
If cell Q19 is not blank, return the value of cell E$4
Copying the target cell to target.offset(0,-3)
View 5 Replies View RelatedObjective:
* I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide
* I want to paste 10 rows of this information
* AddressStart will be a variable address such as B2, B10, B1000
Here is my current code (which fails on copy/paste):
Code:
For NewRows = 1 To 10
WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert
WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0)
Next NewRows
Questions:
1) How do I set the relative reference to set the size of width of the row to be pasted?
2) Is it possible to refer to the end of the row (far right)
I have a piece of code that does the following:
In Cell A1 if 0 is entered, it puts a diagonal line through the cell
If in Cell A1 anything other than a 0 is entered, then the the diagonal disappears.
I would like however for the code to recognize that if the cell is blank then to put a diagonal line through the cell as opposed to entering a 0. The code is listed below:
*The code below also does what is described above for cell A2*
_______________________________________________________
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$1"
If Target.Value = 0 Then
Target.Select
With Selection.Borders(xlDiagonalUp)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
I'm trying to make up a sheet that will be able to cope with users pasting in data from other sources. I thought simply running a TRIM function on any data entered in the target cell would be enough, but I've realized that many of the "space" looking characters are not really spaces and don't get trimmed. I've searched around here, but can't find a definitive answer... What can I use in VBA to trim anything that isn't a-z or 0-9 from around data that's entered or pasted in?
View 9 Replies View RelatedSummary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
View 2 Replies View RelatedI would like to add one more "And" to the code below: If Target is in Column M
[code] If Target "" And Range("B1") = 1 Then[/code)
I have a spreadsheet at work . I am tracking the quality target for the department and I need to create a formula that adjust accordingly to the target set for month end which is 90%.
I have build in the foreacasted numbers for the whole month but I need the formula to indicate the minimum error points needed to achieve the target of 90% for month end when I replace the forecasted numbers on a daily basis with actual numbers.
I have attached the spreadsheet which will be clearer.
I am looking for a way to avoid the circular reference issue. I would like to monitor a cell that is being incremented and decremented so that I can automatically retain the highest and the lowest values that were entered into that specific cell over time. Since the data is only entered into that specific cell and not retained in for example a column, the MAX/MIN option is not usable in this case.
More simply stated, is there a way to put a formula in a specific cell ( A1 ) that will equal the target cell ( B1 ) only when that target cell ( B1 ) is greater than A1?
I was trying to use a modified version of JBeaucaire's code to achieve the same results within my form. In my workbook I have a a table (called Table27) that ranges from A7:CL109
This is the code I'm attempting to use:
[Code] .....
Column A is where my target cells are... where the user will enter data. In cell CI (the 87th column) I want the Data & Time stamped.
I thought I'd modified the formula correctly, but I can't seem to get it to work.
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies View RelatedWhen i select a cell with the mouse, so its active, then i want S27 to show the location of the selected cell.
View 1 Replies View RelatedWhen ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub
UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value
UserForm1.show
End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I need VBA code for the following - I have a worksheet with seven colums of data (A to G) - I need to copy the first column (A) from the active worksheet then open master workbook called 'master' and paste the data in to column D - then save the 'master' as the name in cell Z1 of the 'master' workbook. Once this has been been completed I need to repeat the process but this time copying column (B) and so on.
View 4 Replies View RelatedI tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
I am not the most advanced VBA user
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View Related
