I have a list of 31 values in separate cells. The values are three digit letter codes. Here is an example of 5 of them:
ATL
GMI
WOB
COI
PTS
What I am wanting to do is have a Conditional Format to change the color of the cell to Pale Blue if the value equals another cell that is within a range.
1. Pupils have a target grade
2. Pupils can either do a higher or foundation Tier exam depending on their ability
3. Pupils do 9 modules and the grade bounderies are different for each module.
3. I use bar charts to report the results back to pupils and parents. Instead of just telling them you got 50% D your Target is C. I also want the target grade to be converted to a mark.
I do not want to create another woorksheet inorder to use Vlookup.
4. I now know that Index and Match can do the trick of reading the left columns. But I cannot get them to first consider the Tier for each student.
I was thinking of usind IF
IF Tier is Higher then Index the Higher Table and Match else Index Foundation Table and Match to get the mark. But I do not know how to express this in a way that's readable by Excel
I want to conditional format cells with an if statement (something to that nature). I attached an excel file to aid in my question. Basically I want it to be color coded to alert users Red if no action is required because info is left out Yellow if info is available so take action Green if all is complete and nothing needs to be done.
If G2 does NOT have data then cell H2 has red fill
If G2 does have data then cell H2 has yellow fill
And finally if I2 is filled out cells A2:I2 are green filled
In s74 I have the formula
=COUNTIFS(C:C,"Holiday Inn Express Limerick",I:I,1)
And it gives me a count of 21. Is there a way where I can use conditional format to highlight those 21 instances?
I want to highlight a cell if the text displayed from an IF formula is equal to the cell content.
CELLS BK10:BN10 are merged and have entered into them the following text "SELL"
Cells BJ20:BP20 are merged and contain the following formula which currently results in the cell displaying "SELL"
=IF(BM22<=-0.08,"SELL", IF(AND(BM22>-0.08,BM22 < -0.03),"NO INDICATION", IF(BM22>=-0.03,"HOLD")))
Cell BM22 is a percentage calculation of the differences between two different days of volume for this stock and that formula is: =(BH22/BH25)-1 Cell BM22 currently is calculating the result to be -65.65%
When I set up a CLASSIC Conditional Formatting using a formula (="If($BJ$20=""SELL""") to check the if the text in cells BK10 match the text displayed in cell BJ20 - I get no error messages and no formatting?
I am using Mac Office Excel 2011. I feel like I have tried everything including changing the Number selection type of the cells to TEXT. Nothing seems to works.
I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Here the situation I have a list of around 2000 hyperlinks from my workbook and its various sheets. I have a pre made list of all the hyper links that there should be unfortunelty you know how things go and Im off by some here and there. What I need to figure out is how to match up my hyper link list to my pre made list. Im thinking an if statement looking for keys (truck #, Trailer #, Date) to get me the closest matches I can without having to go through every single hyper link....
Im thinking i need to match the criteria (truck #, Trailer #, Date) to that of the data i got from the hyper links. Ill explain more on my attached work sheet so it is more clear to under stand.....
I have a very long function I created. But I need to edit it in a matter I have never done before.
Below is my function and i will like to add a new condition to it.
IF the text value in cell C7 is equal to any text value in Workbook2 B10:K10 and the value underneath that cell (I.e if B10 then B11 etc..) is Deleted then I want to have one of the conditions of my function below display "Deleted".
=+IF(AND(E7<=0,J7<>0,Y7<=0,AO7<=30),"Check Inventory",IF(AND(E7<=0,J7<>0,Y7<=0,AO7>=60),"Delete Listing ",""))
I have to determine based on average number of weeks on hand whether an Item is Overstock, Obsolete, or Normal. I've got that taken care of with some If statements (I'm sure there's a cleaner way to do this but I've not figured that out yet.)
But I need my if statements to be conditional to whether or not an item is seasonal. with 10,000 active SKU's Its a little bit much to manage those in my excel copy of the item table so I wanted to make an exclusion table where I could just key the item in and the months it would be considered active in stock. This needs to go into the If statement on the items table that looks at the current date and says if it's less than six months old it's a "new item" but if it's six months and a day then it's a normal item, then ignore both if it's seasonal and just be a seasonal item if it is on the exclusion worksheet.
I'm attaching this incase anyone can offer any ideas. It would be much appreciated. I had to delete a ton off of the spread sheet to get it to upload, and the data is dummied to keep company inventory confiential.
I have a column with different letters in it. If this column DOES NOT have an L, H or F than I would like it to add a K.
If the column DOES have a an L, H or F then I would like it to remain as is and not add the K.
I have three worksheets the first one called Econ the second one called CheckLogs and the third is a customer sheet. I am needing to match up a cell from the Econ sheet with a cell from the Checklogs sheet and then it matches a cell from the customer sheet with a cell from the checklogs to determine what customer sheet. My problem is how do I loop through the customer code cell until it finds the correct cell.
=IF(B1=CheckLogs!B2,INDEX(CheckLogs!$F$2:$F$4493,MATCH(Econ!G2,CheckLogs!$C$2:$C$4493,0),MATCH($B$1,CheckLogs!$B2:B4493,0)), "")
so in the formula "B1" is located on the customer sheet and is the customer code field, "CheckLogs!B2" is on the CheckLogs sheet and is the customer code field. I'm just not sure how you loop if the customer code in B1 doesn't equal the customer code in CheckLogs!B2 and run through the formula again.
I'm trying to use index match with IF statment. I understand how this works just not quite sure how to get a 'True' return based on 'logical_test' portion of the IF function. I want a TRUE return when column H starts with 'hbap.adroot.hsbc/gsc' or alternativly just contains the letters 'GSC'. If column H contain 'GSC' Column A will output 'GR' not HBAP'
View 2 Replies View RelatedI have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.
I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.
=IF(MATCH($B5,'FY 06'!$B$5:$B$24,0),1,0)
If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.
So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.
I need a formula that would be able to calculate the distance from the start
of a code to the end of a code. An example table is below. The start and
end of a code is indicated in the CONT. column. (Start of first code = S1,
end of first Code = F1, Start of second code = S2, end of second Code = F2,
etc.) Maybe a table could be used (E1:F2) that shows the corresponding Start
& Finish Codes. Two conditions need to be met before the length (in DIST
column) is to be calculated, the Report numbers and the Codes must be the
same for both rows.
ABCDEF
1S1S2
2REPORTDIST.CONT.CODEF1F2
31005S1B
410010S2A
510012F1B
610014C
710016F2A
82002B
92004S1B
1020010F2B
In the table above:
- Code B in report 100 would go for a distance of 7 (12-5).
- Code A in report 100 would go for a distance of 6 (16-10).
- Code B in report 200 would go for a distance of 6 (10-4).
Is there any way to do an IF statement that is based on the format of another cell. For example
View 3 Replies View RelatedI am having a problem defining a currency format based on an IF statement. My statement looks like this......... =IF(E22=1,"USD",IF(E22=2,"CAD",IF(E22=3,"EURO","USD")))
What I want is to show $ when USD or CAD is returned and € when EURO is returned.
I wish to use a formula to highlight a date based on two criteria in two separate columns;
The first is the Date that will be in Column B.
I want it to highlight the date if : Today() is greater than that date in the cell plus 5 years (or 1824 days)
The second criteria I want is for the date to be only highlighted if the corresponding cell (in column A) does NOT contain the term ("Basic")
I have the formula:
=AND((TODAY()>(B1+1824)),A1=("Basic"))
which highlights the date correctly IF the term in Column A is "Basic" : But I cannot figure out how to insert the NOT statement to make the formula flip around so it only highlights those dates older than the 5 years requirement and NOT contain the "Basic" in column A.
I have several rows with data in and what I would like would be to total the amount of time "CU" is displayed and if that number is less than say 10 the formatting is applied. I need if possible to be able to do this via the one condition.
View 2 Replies View RelatedI type this formula and it work only for the first and the last condition, for the other condition it return to me FALSE. i dont now what is wrong,
=IF($C$10=1200,$E$10
Can you do a IF statement in Conditional Formatting? I need a column to highlight Red if there is a blank in it based on the current time COMPARED to the stated time in another column (on a separate tab)
So if current time is 1:30 PM and the stated (appointment) time on the other sheet is 1:15 PM, and my control field is still blank, I need it to turn Red.
I am trying to match up two sheets and I the match criteria is based on the data from columns B, C, D, E, and G. Sheet 1 contains ~20,000 line items of data. Sheet 2 contains ~250 line items. I am comparing the info in sheet2 vs. the data in sheet1. Both sheets are formatted the same.
For each row in sheet2, I need to compare against all rows in sheet1. For example; for the first row in sheet2, determine if there is a row in sheet1 that contains the exact same data for columns B, D, E, and G (all must be true) and the data in column C is False. Examples:
I guess because I use a drop down box and another cell reference for the date, my IF/AND statement isn't recognizing the date and therefore gives me a "FALSE" result. I have the date formatted as a date.
I've tried referring to cell I2 which is the drop down box - that doesn't work. I've tried using quotes around the date as if it were text - that doesn't work. If I use just the w10=3 part, that'll work fine but it must be associated with the proper week otherwise every 3rd of the month that falls on a friday will be a holiday.
How do you do two "if" statements?
I need to have two tests before i get a final result so i need to know the protocal to get two if statements.
I am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly.
worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
HOW I CAN USE IN EXCEL VALIDATION DROP DOWN BELOW CONDITION
=IF(B1="Assets",[Mapping.xls]Assets!$A:$A,IF(B1="Liability",[Mapping.xls]Liability!$A:$A,""))
I have the macro below that I want to use to conditionally delete all columns where the first row of each column does NOT have the following values but it seems to be deleting most of these columns as well all the others.
Fellow Excellor
Sub Deletecolums_Conditional()
Application.ScreenUpdating = False
[Code]....