Index-Match With 2 Columns And One Row
Mar 22, 2014
I've got a problem with an index match formula that does not work
Sheet 1:
Country Year GDP
A 1960 =
A 1961
A 1962
B 1960
B 1961
B 1962
Sheet 2:
Country Measurement 1960 1961 1962
A Population 12 15 18
A Inflation 3% 4% 3.5%
A GDP 158 160 161
B Population 78 80 81
B Inflation 2% 1.4% 2%
B GDP 600 608 610
How do I get, for instance, the GDP measure of country A in year 1960 from sheet 2 into cell C2 in sheet 1?
View 8 Replies
ADVERTISEMENT
Apr 9, 2014
I want to do a simple Index/Match with two collums. it works like this:
=Index(B3:B34,MATCH(A1,O3:O34,0))
But the problem is there are periodic break in those two collums that i dont want included in the function because i dont want to include those rows in any result. so i tried:
Index((B31:B34,B26:B29,B21:B24,B16:B19,B11:B14,B3:B9),MATCH(A1,(O31:O34,O26:O29,O21:O24,O16:O19,O11:O14,O3:O9),0))
and it returns a #N/A
[URL]
View 2 Replies
View Related
Jun 11, 2014
I am trying to work on a index match but can't seem to make it work.
My look up value are on column while the data I want to show and look up array are on rows and still getting 0 results.
Is there any solution ofr this to make it work without altering my look up value & arrays to columns as well?
View 4 Replies
View Related
Mar 13, 2014
I've got a problem where I am trying to return a value if two criteria from one table match two from another.
I have included a example of my issue.
=INDEX(Time!D:D,MATCH(Data!A2,Time!A:A,0)*AND(MATCH(Data!C2,Time!C:C,0)))
I have had a look around lots of forums but cant get my head around what is wrong with my formula
View 4 Replies
View Related
Dec 30, 2013
I need to Index & Match the Max Value for 3 separate columns labeled "Price". The columns are not adjacent and cannot be moved. I am able to get the Max for the 3 Price columns using:
=MAX($L$12:$L$45,$O$12:$O$45,$R$12:$R$45).
However, I need the matching value in column D labeled "Int. SF". I can only do this for one column at a time so far using this formula
=INDEX($D$12:$D$45,MATCH(MAX($L$12:$L$45),$L$12:$L$45,0)).
When I try to use all 3 columns with Index & Match
=INDEX($D$12:$D$45,MATCH(MAX($L$12:$L$45,$O$12:$O$45,$R$12:$R$45),$L$12:$L$45&$O$12:$O$45&$R$12:$R$45,0)), #VALUE! is the answer.
If I enter it as an array, the answer is #N/A. I tried making the 3 columns into a table (which I named Price1) and tried the formula again
=INDEX($D$12:$D$45,MATCH(MAX(Price1),Price1,0)),
But that did not work either.
I tried using a V-Lookup, but can only get results for the first column, not the other two. I've attached my spreadsheet.
View 6 Replies
View Related
Jul 12, 2014
I need a formula for left coulmn lookup (using index and matching function) and lookup array has duplicate value.
View 1 Replies
View Related
Feb 14, 2014
I am building a timeclock, and am using a user form to allow people to sign in/out.
I have a punch in form that logs the inputed username and password (after being checked against my employee list), along with a count of their username on this sheet (as a count of how many times they have punched in) and a timestamp (column 4). These values are all pasted to the first blank row in my worksheet "PunchInTimes".
Then, I have a punch out button that logs these same values the same way, only on "PunchOutTimes". Then, the idea is to link the index number of the PunchOutTimes record and PunchInTimes record for any given user, so that when they punch out, a complete record is pasted (to the first blank row) in a separate worksheet called "Timesheets".
I have been able to paste the username and count to the "Timesheets" sheet, however as soon as I try to index/match the count and inputed username (on the punch out form), I get an error 13 type mismatch.
I'm trying to paste the corresponding punch in time to this punch out time, so ive used an index/match with two columns (username and count) found in "PunchInTimes", and try to return the corresponding 4th column value (punch in time). After pasting the "punch out only" values to the PunchOutTimes, i used a "With/End With" statement, and set wsc equal to my 'timesheets' worksheet at the beginning of my code. So the line where I get my error is below in bold:
[Code] ......
View 4 Replies
View Related
Oct 8, 2009
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
View 9 Replies
View Related
Jan 29, 2014
I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
I am using Excel 2011 for Mac
View 7 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
May 23, 2014
We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
View 5 Replies
View Related
Jan 21, 2014
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
View 3 Replies
View Related
Feb 4, 2014
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
View 3 Replies
View Related
Aug 28, 2012
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
View 5 Replies
View Related
Jul 11, 2008
INDEX/MATCH multiple ocurence match values needed
View 9 Replies
View Related
Jun 10, 2009
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies
View Related
Jan 15, 2013
I couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
View 3 Replies
View Related
Oct 6, 2009
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies
View Related
Sep 27, 2007
I am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
View 9 Replies
View Related
Apr 6, 2009
Example:......
On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.
This is my formula.
=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building
Details'!$A$2:$R$2,0))
View 3 Replies
View Related
Jan 8, 2014
I am using sheet 1 to pull data from sheet 2 using this formula
=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0)).
This on its own works to pull the data. However the data is repeated for each 'set' of data ie each group of repeating names, as I drag down. I just want the data to appear once on the first lie of each group so I have added an if to the formula
=IF(C2=C1,"No Match",
My complete formula is now
=IF(C2=C1,"No Match",=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0))
View 2 Replies
View Related
May 3, 2009
On the attached workbook, on the "Progress Summary" page, cell C30 has a formula which should list the names of pupils who made 0 progress (as referenced by the Raw Data page, column R [progress] and column A [name].)
View 3 Replies
View Related
Dec 3, 2009
I have never used the aforementioned functions before, but i assume thats what i need to do here....
In the attached table, what formula do i use to return the value '8' i.e. whats in column "Epsilon" and row "Three"
If you could let me have the generic formula i need as well, that would be good.
View 11 Replies
View Related
Feb 3, 2010
I can't figure out why the N/As are coming. In G2 I have =INDEX(Area_Codes!$D:$D,MATCH(F2,INDEX(Area_Codes!$B:$B,0),0)). If I replace F2 with 407, I get FL which is right. But why do I get N/A??
View 4 Replies
View Related
Feb 18, 2010
L26 returns incorrect information. Input parameters are F29 and F30. In its current state, it returns the value “b”, where I think it should be returning “1”, i.e the intersection point for “3Ph” & “Single-core 70°C thermoplastic non-arm Cu Table 4D1”
View 6 Replies
View Related
Mar 5, 2009
If the value on sheet2 columnA ,matches value sheet1, column AC
then corresponding row value sheet2,column E be put in corresponding row for matched value ,sheet1,column Z.
View 6 Replies
View Related
Mar 30, 2009
I have the following array formula that matches against a table with 3 criteria (one specfically is a time), it works ok until the time criteria is not of the value searched for, it may be +/- 30 minutes out, is it possible for the formula to index/match to the actual value or to find the nearest match possible, its in column B.
View 3 Replies
View Related
Apr 27, 2009
insert =IF(ISNA into the following formula? =INDEX(Data!$AE$2:$AE$10,MATCH(1,(Data!$AI$2:$AI$10=$A$11)*(Data!$AD$2:$AD$10=Sheet1!$A$6),0))
View 3 Replies
View Related
Dec 17, 2006
I have the following code from my UserForm that works fine for my Summary sheet.
Private Sub TextBox2_AfterUpdate()
Application.ScreenUpdating = False
'//Get the Truck # to act on
Dim varInput As Variant
varInput = TextBox2.Value
'//Exit if no input
If varInput = "" Then
Exit Sub
End If
What I am trying to figure out is to do a Index,Match or what ever it takes to populate the Truck sheet (250+) with info from the user form.
TextBox1 is the date. TextBox2 is the truck number, 3 is the Milage, and 4 is the Cost.
All in relation to the following sheet for the truck: ...
View 9 Replies
View Related
Mar 10, 2008
I have the below formula which works fine when I only want it to lookup one sheet but I am now trying to get it to lookup 2 sheets.
I have tried numerous variations but still no luck. Plus I am not sure that with the formula that I am using it is even possible.
HTML =INDEX('2008'!$B$2:$J$1697;MATCH($B6;'2008'!$B$2:$B$1697;0);2)+INDEX('2007'!$B$2:$J$1697;MATCH($B6;'2007'!$B$2:$B$1697;0);2)
View 9 Replies
View Related
