I have created this macro below however if on the worksheet I insert a line or lines the macro range G25:G107 does not change - it remains static.
How can I get an insert of a line to increase the macro range by the number of inserted lines. For example if I insert 2 lines then the macro range s/b now G25:G109.
I have two sheets that i am working with sheet1 and sheet2.
I need a macro that will insert multiple rows in row 8 of sheet 1.
I also need it to copy the formula from row 8 sheet1 to every new row inserted.
the number of rows inserted will depend on colum A from sheet2.
*column A contains numbers, and the amount of numbers will vary. The data starts in A11 and continues down.
So for example. if sheet 2 column A11 and A12 and A13 are the only cells that contain numbers, then the macro will add 3 lines starting in row 8 of sheet1 and it will also copy the formulas from that row to every new row inserted.
Worksheet excel with multiple lines and colums. I need a macro to automatically insert a new Line where the cursor is located, and duplicate data from previous cells: let say cursor is located L10, macro will insert L11, and duplicate L10 -C1 data to L11 -C1. I have a macro that does this function, but the Line insertion is always at the same line.May be the macro should "read" first the cursor position, Lx and then move down +1 line prior to duplicate the data.
View 2 Replies View RelatedI have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedCreating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
View 5 Replies View RelatedI had a couple of days ago..
I can get the "Daily %" to update just fine but for the life of me cannot get the "Total Number of Patients" to update.
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
Simple question: Can an Excel Macro insert a line of boilerplate text under the last thing copied to a worksheet? I want to paste something into a worksheet, and add a message under it, and a blank line.
View 5 Replies View RelatedI have the code below in a userform. I would like to add a line that will insert this formula in column B everytime a new row is inserted....
View 8 Replies View RelatedIn sheet colA have dates how to insert lines between months. eg 3/19,4/5
View 9 Replies View RelatedI currently have a 200 row table spanning 10 columns. There is one numeric column and the rest are free text. The table charts the different contents on one of the shared drives here at work. The drive is frequently in use with things being added and removed from it.
I have an excel table already which can sort the contents in order of size (numeric row) or name of the folder (the first text column). I have two buttons at the top.
The first inserts a row, which I did by recording a macro and then copying the code into the button.
The second I would like to do the following: When a user selects a cell in a row, the button, then clicked, deletes the entire row. Not just the data in it, but excises the row itself and stitches the surrounding materials together. The code to delete a row I could obtain easily, but I can't work out to say "find the selected cell, and take out the row it belongs to".
I have the following vb to insert a row above every row in an autofiltered list (autofiltered for nonblanks).
Problem is that if in the autofiltered list there is not a gap then it inserts a row for each line where there is no gap
SO for instance if in the filtered list cell A500:a505 have no gaps between them (meaning all are nonblanks) the vb will insert 6 rows above A500 and leave no rows inserted above a501, a502, ...etc
I have approx 10,000+ rows and there are approx 550 rows that I need to insert a row above (but want to automate/save time) by having the vb do it.
Code:
Sub InsertRow()
' Insert a row between each Client/Cycle
'Will have some manual cleanup after this step
[Code].....
I have a large spreadsheet of demographic data. In column A there is a name, in column B there is Address1 and in column C there is Address2. First I need to insert a new line under each line of data. Then I need the Address2 data (column C) of each line to be copied/pasted to that new inserted line, but in the Address1 column (column B).
View 9 Replies View RelatedI have a spreadsheet with the following (example) :
Column A :
alabama
alabama
alabama
arizona
arizona
arizona
arkansas
arkansas
I want to insert a blank line (row) wherever the state name changes.....
I currently have a macro that does several thing, i want to add another task.
I need a row inserted everytime there is a change in column H from "0" to "F" only. The infromation will always start in row 8 but the last row is not always the same, it will be different every time.
ABCDEFGHI112345678223456783#N/A#N/A#N/A#N/A#N/A#N/A#N/A45B=Bi-WeeklyID type 2ID Type 308 GAPamount due6HCCompanyS= Semi-MonthlyCO#NAMEFORMER (F) or Current (0)78546WalreBbr55a234amy01009524WalreSn32m56daniel05001041WalreS589653jode0100011945WalreBef343456caryF2001212WalreSg5365M5665mikeF40013Grand Total2,200.00
i have numbers in column A1:A556, i want to insert a row below every column that has a number so that they can have double spacing.
View 1 Replies View RelatedI need a formula to insert a line break after every 42 characters in a cell , example if there is 266 characters in a cell there should be 6(266/42)line breaks.
=REPLACE(REPLACE(A1,42,0,CHAR(10)),84,0,CHAR(10))
I tried this but i am not sure how to get the start num to change to 126,168 and so on
I have to do a large amount of routine work with a large number of sheets. I have tried to record some macros to do the job.
First of all I would like to insert 2 lines under line 6 in the active sheet.
I then need to drag the formulas found in line 6 down over the two new lines.
Thirdly i would like to change the text string "xxx" in the formulas found in line 7 to "yyy"
I need to add a line on the top of a new worksheet with the data copied from another worksheets cells. Using a macro. The line has to be created everytime on the top of the new excel sheet with the previous data moving one down.
View 6 Replies View RelatedEach cell in Range("A1:A2000") contains a remark, each phrase or remark is
Between 5 & 70 characters all written without line feeds (carriage return,i mean Alt Enter) Just spaces between words. What I would like to do in every cell is to force a line feed (Alt Enter) every 10 characters, and if the 10th character happens to be in the middle of a word I want the line feed to be inserted at the end of this word. Note that the phrases are not necessarily multiples of 10.
I have several macros running on my workbook, referring to different cells. When I add/remove a row/column in my workbook, I need to manually update all cell references in the Excel macros so that they point at the correct cells after the new rows/columns have been inserted.
View 2 Replies View Relatedwhat I am looking to do is when in colum AA a cell changes to "Drawdown" I'd like the cells in column A:D,F,H:L,N:Q,S:Z on the same row to grey out and a line to be insert below the cell that was changed, if it selects "Fee" , cells in A:D,F,H:L,N:Q,S:Z on the same row.
I have writen the following butit seems rather cumbersome and I can not get the insert line to work.
Code:
Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim IntersectRange As Range
Set WatchRange = Range("AA1:AA500")
Set IntersectRange = Intersect(Target, WatchRange)
[code].....
I am Working on a Query to Update Record in the Database if Exists Otherwise Insert. I have 2 tables in the database Receipt table and Inventory Account Table.
For Receipt Table there is Form which is used to Insert Data into the Receipt Table(SQL TABLE). Behind the Button Click Event with the Receipt Table Insertion Query I Write a Select Query to Get data from Inventory Account Table Group By Part Number and Location in a recordset.
Code:
objmyrecordset.Open "select [Part Number],sum([Quantity Received]) as TotalQuantity,[Move From] from [5_PO_RECEIPT_TABLE_DATABASE] group by [Part Number],[Move From] ", objMyConn, adOpenStatic
objmyrecordset.MoveFirst
Do
strSQL = "select Count(*) from [Inventory_Account_Move_Table] where [Part Number] = '" & objmyrecordset![Part Number] & "' and [Location]= '" & objmyrecordset![Move From] & "';"
[Code] .......
I used the Above Code to Complete my task. The Problem is It is Adding the Correct Values into the Inventory Account Table But It is Not Updating the Previous Records. it sum all the Values in Receipt Table based on Part Number and Location but it insert this record in New Line. I want it to Update the Previous record for same part Number and Location.
I need to do two things in my Excel spreadsheet: 1) I want it to insert a blank row everytime a value in the 1st column changes. 2) In the blank lines, I want to do a COUNTA for each of columns G through N. If I can get the program to insert the blank rows...they will not be a set # of records apart...some will have 3 records & some might have 17 records. Is there a way to automatically cause #2 to happen instead of having to choose the function icon and then tell Excel the first and last cells in each range?
View 1 Replies View RelatedI am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
A colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.
Code:
Sub Button1_Click()
'
' Button1_Click Macro
'
'
Rows("56:56").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B57:F57").Select
[Code] ........
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub