VBA Worksheet Change Insert Line And Format Particular Cells?
Nov 8, 2013
what I am looking to do is when in colum AA a cell changes to "Drawdown" I'd like the cells in column A:D,F,H:L,N:Q,S:Z on the same row to grey out and a line to be insert below the cell that was changed, if it selects "Fee" , cells in A:D,F,H:L,N:Q,S:Z on the same row.
I have writen the following butit seems rather cumbersome and I can not get the insert line to work.
Code:
Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim IntersectRange As Range
Set WatchRange = Range("AA1:AA500")
Set IntersectRange = Intersect(Target, WatchRange)
I currently have a macro that does several thing, i want to add another task.
I need a row inserted everytime there is a change in column H from "0" to "F" only. The infromation will always start in row 8 but the last row is not always the same, it will be different every time.
ABCDEFGHI112345678223456783#N/A#N/A#N/A#N/A#N/A#N/A#N/A45B=Bi-WeeklyID type 2ID Type 308 GAPamount due6HCCompanyS= Semi-MonthlyCO#NAMEFORMER (F) or Current (0)78546WalreBbr55a234amy01009524WalreSn32m56daniel05001041WalreS589653jode0100011945WalreBef343456caryF2001212WalreSg5365M5665mikeF40013Grand Total2,200.00
I need to add a line on the top of a new worksheet with the data copied from another worksheets cells. Using a macro. The line has to be created everytime on the top of the new excel sheet with the previous data moving one down.
I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
Creating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
I have a worksheet containing several tables of number values. I want to be able to take any table of values, change them to a different format, and do it using only an event trigger.
So if I have a table of integers, the next entry in that table will change everything to the new format.
Code:
Sub Worksheet_Change(ByVal Target As Range) 'Changes selected cells to MOT operation number format If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub 'Error trap
[Code]....
how to change values in the worksheet from the beginning. What I want is to know how to change values of an existing workbook using only VBA code.
I have a large project with many worksheets. Somehow I managed to change the default number format for new worksheets to Time. So... when I create a new worksheet and paste stuff into it I get everything in AM/PM. How can I change the default number format to Number?
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I would like to copy several cell entries from one worksheet ("Entry") and paste then into a new line of another worksheet ("Contact DB") which will serve as a repository/database. Ideally, I would like to clear the values in the first "Entry" worksheet once this is done.
The thing that is throwing me off is that the data entered into my first "Entry" worksheet is not all on one row. However, I have recorded all the starting point references and destination cells (i.e. "B2" from "Entry" --> "A5" of "Contact DB") so it's ready to go into code.
Using the following code (which I tested for copying and pasting the first cell of interest) but I can't seem to get it to work:
Code: Public Sub Macro1() Application.CutCopyMode = False Sheets("Entry").Range("B2").Copy Sheets("Contact DB").Range("A5").Paste
End Sub
I'm brand new to vba so I'm struggling to understand the code and where it goes. That brings me to Q2 (and a dumb one it is). Where do I put this code? I already have one bit of code (for allowing multiple entries in a dropdown list) for the "Entry" worksheet under the "Microsoft Excel Objects" folder. Is this where this copy and paste could would go too? Or do I need to insert a "module?"
I have a large file that has the following setup 2003 Zipper X 2004 Zipper X 2005 Zipper X 2003 Zipper Z 2004 Zipper Z 2005 Zipper Z How can I insert rows at changes in the product description
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data Column B: B2 of 'Source' Column C: B2 of 'Source' Column D: B1 of 'Source' Column E: row 6, relevant column column F: column K column G: row 5, relevant column column H: the specific amount
So basically I'm creating an entry for every amount in the table.
Is there a way to have a drop down or some sort of input cell that would change the look and format of the entire worksheet? Not sure how to pose the question?? For example.
What I'm working on is a departmental forecast sheet.
I want my department heads to be able to all look at the same excel file, then be able to input or select their department from a drop down. Once the department is selected that would call for excel to bring up the forecast for their specific department (**Each departments sheet is a little different).
Just recently My Excel 2010 has decided to not let me right click to format cells, delete or insert rows. I can do these functions from the ribbon, but not via right click. this happens in both existing spreadsheets where I am the author, or even a brand new spreadsheet like in the image below. we have restarted the computer, Uninstall and reinstalled Office and still get same symptoms. I got here thru google but cannot find an answer anywhere.
I am very computer literate and even our IT personnel have looked at this with no answer. as you can see in the image, these options are greyed out.
I have a consolidated sheet which I maintain to keep track of the scores of my team. Unfortunately from time to time, the format of all the cells is getting changed to "time" value. I do sometimes use an addin which I have downloaded from Straxx.com (excel password remover) and I am not sure if this add-in has anything to do with this.
I am having to change the format of almost 20+ columns every time this happens.
I cannot change the number format in a single sheet of my spreadsheet. I can go to format cells and select colour etc but it will not change the number format.
Another issue on the same sheet is that linked cells i.e cell b3 formula "=A3" displays "=A3" not the actual value in A3. Again, i cannot change the number format of this cell and yes, auto calc is on.
Whilst not wanting to offer a partial explaination (per the rules) just before this happened i was pressing a combitation of Shift+Control+` - not sure if that is relevant.
I want to get the sheet back to its 'normal' working order.
whenever i start a new worksheet in the workbook, it's format is set as custom format. At the same time, whatever pivot table draw will be in this custom format. Is there anyway i can change the default format back to general? There is also a sample attached...The actual db is kinda more complex than that but there is a limitation of 40kb so...Is there any other preferred website to upload files?
I have been trying to get a formatting programme to work for well over a week and no matter what I try I seem destined to fail. I am trying to use an IF statement in VBA to format a cell if the result of the IF is true. The values in the cells being formatted have been generated from a VLOOKUP statment (looking at a table on another sheet of the workbook). I have tried to use conditional formatting but cannot get past the limit of 3 conditions.
Note in the code below I have values that may appear the same but to make them unique they have a single (or double) space before and after the character. Not sure if the code I have below is workable, if anyone has a better idea please let me know (its a little long winded). I am currently self learning VBA (through forums and the like) and below is the best I have come up with... however when I try to run it I only get a Run-time error 1004, application-defined or object defined error.
I have created a named range that includes raw data layed out in 4 columns (Finish Name, Fill Color, Pattern, Font Color). On a separate sheet, when one of the finish names is selected in a particular cell, I want the cells fill, pattern, and font color to change according to the raw data. Below is the vba code I am trying to get to work. However, it is not working. It does not break, but does not achieve the desired result. It looks like the variables are getting set correctly, but still not changing the cell when they are referenced. I am only testing it on the first finish color, as seen in the code. All of the rest are static values for the cell, but I want the values to be dynamic.
Sub SetFinishSeparatorColor() ActiveCell = frmFinishSeparator.cboFinish.Value Set rngTarget = ActiveCell With Sheets("Pick List Do Not Tamper").Range("Finish_Cell_Color") lngFinishCellColor = . Find(What:=rngTarget, After:=.Cells(1, 1), _ LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False).Offset(0, 1)..............
I am trying to format certain cells to change colors depending on the date and the content of the next field to show due dates.
cell label due date date completed
c5 au5 be5
c6 au6 be6
c7 au7 be7
c8 au8 be8
What I need is for the contents of au5 to be green up until 10 days before the due date, yellow up until 5 days, and red with less than 5 days until the due date. If the date completed is entered into be5, then the contents of au5 should be black.
Is this possible, and if it is, how do I set this up? I tried to use
=$AU5-TODAY()>=10
And choose green formatting (something I found on yahoo answers), but when I enter the date the text is still the original black font.
I have the same report, one a monday snapshot, the other a daily comparison. I would like to index columns B, in both reports, to find the same part number and then reference the horizontal row and highlight increases in columns G thru AD. The comparison report looks identical but the column B numbers may not be in the same location. this is a report to show prosduction requirements and the increases throughout the week.
I need change the color of the cell depending on the following conditions. (By the way the column will have names list)
1. single punctuations are allowed anywhere in name apart from first position.-->color should not change 2. If any name got consecutive punctuations --> color should change to RED. 3. Any punctuations apart from Dot(.), hyphen(-), apostrophe('), Space( ) are not allowed-->color should change to RED.
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
What would be the quickest and most efficient way of doing the following:
Example
Sheet 1: clicking once, twice, three times in the following cells to change the fill to Red, Yellow, Green respectively (in Row 22, COLUMNS E H K N Q T W Z AD AG) and mirrorring this format/fill on:
Sheet 2: , mirror the selected fill on sheet1 in E22, H22 , K22 in in E3:N3 respectively example E22 (sheet1) is mirrored now in E3 (sheet 2); H22 (sheet 1) is mirrored in F3 (sheet2) etc etc.
I have 35 tabs formatted in the same way - each tab, as with Sheet 1 is linked to a different row on sheet 2 in the same range as is sheet 1 and would need to replicate the mirorring on Sheet 1 to each of the other 34 tabs.
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A B C
1 First Name: Last Name: Address: John Smith 123 Harold Street First Name: John Last Name: Smith Address: 123 Harold Street
I have a worksheet that gets autofiltered by the user. I need take the unhidden data and copy it to a new worksheet.
Range("H18").Select Dim sh As Worksheet Dim Cell As Range Dim Txt As String For Each Cell In Sheets("Panel Check List").Range("H18:H5000") If Cell.EntireRow.Offset(1, 0).Hidden = False Then Cell.Copy Sheets("Query Results").Range("A6").Select If IsEmpty(ActiveCell.Offset(1, 0)) = True Then ActiveCell.Offset(1, 0).PasteSpecial End If End If Next Cell
