Insert Number If Data Present?

May 14, 2012

So I am trying to write a bit of code that will insert a number in sequence in column A if there is data in column B. I need the column to be numbered 1-### if column B contains any data. I not been able to find this code anywhere, just delete if or count if statements that do not give me what I need. I think I have a few pieces of the code (e.g. Active Cell Offset) but can not seem to fit together in the correct order.

View 3 Replies


ADVERTISEMENT

Tally Data And Return The Number Of Times A Particular Value Is Present In Column

Aug 25, 2009

I have a formula that I use to tally data and return the number of times a particular value is present in column C.

IF(COUNTIF($C$2:C2,C2)=1,SUMIF(C:C,C2,E:E),"")

I copy this formula down the sheet until arriving at the last input in column "C".
Can someone tell me how to write this in code. All I would like visible in Column "F" is the output not the formula.

View 9 Replies View Related

Copy For Cell Values Present And Not Formulas Present

Sep 11, 2009

The following code fills down column B for rows 3 to 110, regardless of the inserted "If Not IsEmply' statement. I've got formulas in Column A from row 3 to 110, but visible values in rows 3-5. I want it to fill the for the visible values only.

View 2 Replies View Related

Find Percentage IF Number Present

Feb 2, 2009

I have a spreadsheet with 6 sheets. There are 3 sheets that have information regarding the soil, geology and drift deposits of an area. The other 3 sheets relate to these sheets to display the information for each area. The way that the spreadhseet is set out pretty much explains what i am trying to archive. Basically I want each sheet to say whether or not the rock, soil or drift type is present for each area. And if it is present to calculate the percentage of total area. I have created a pivot table for each of the info spreadsheets - but need it to look like the "table" sheets, because it needs to be added to a report. Any questions and i'll try and answer them , but it's quite difficult to explain in words what i am trying to achive.

View 4 Replies View Related

Formula For IF There Is A Number Present Then Give Minimum Or Maximum Value?

Feb 12, 2014

I need a formula to give me a MIN or MAX value only if there is a number greater than 0 in the cell AND not alphabetical letters (as some cells do contain). I need it to return the value for that cell across about ten sheets--I have that part figured out (I think). But I keep getting a #Ref error.

View 9 Replies View Related

Count Columns With Data Then Insert That Number Of Rows

Feb 11, 2014

Original

01012014 DAVE JOHN
02012014 MAT
03012014 CHRIS MIKE PHIL

What I want

01012014 DAVE
01012014 JOHN
02012014 MAT
03012014 CHRIS
03012014 MIKE
03012014 PHIL

View 4 Replies View Related

Excel 2007 :: Insert Random Number Preceded By X If Adjacent Cell Has Data

Nov 24, 2011

i have a problem in that i need to generate a random 6 digit number preceeded by an X if the data in column B is either blank or 0. This needs to be filled in if the adjacent cell in column C has data in. i am a moderate macro writer and am finding this part quite challenging.

i am ussing excel 2007.

View 3 Replies View Related

How To Extract Data If A Value Is Present

Aug 28, 2008

how to use COUNTIF to count up the number of times something appears. What I want to do is add up values if an H is present in the cell with the value eg. if 3 cells contained:

H, 3.5
7.5
H, 3

...then 6.5 would be returned.

View 14 Replies View Related

Why Match Turn Out NA But Data Is Present

May 12, 2014

why match turn out NA but data is there ,I'm not very good in this or this formula don't really work,

View 5 Replies View Related

Using Data Tables For Calculating Net Present Value?

Dec 22, 2013

I have to use data tables to calculate Net Present Value (NPV) by altering specific variables.

How to use the data tables function under the what-if analysis.

My sheet and calculations are all set up

But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV.

Ive done it manually by altering the figures on the Inputs and Data Sheet.

My NPV calculation is on the Workings and calculations sheet.

The data tables i have done manually are on the Inputs and Data sheet.

View 1 Replies View Related

AutoFilter - Test To See If Any Data Present?

Mar 14, 2014

What is the simplest way of see if after a filter has been applied with a criteria, whether any data is visible using VBA?

View 2 Replies View Related

Determine Using Vba If Any Data Is Present In The Column

Dec 28, 2008

I have a situation where i have headers in a file but just because there is a header does not mean there is any corresponding data in that col.

I was keying off if just the header was present then i need to do "something" but now i need to key off two things:

1) Header present
2) If there is anydata in the col when a header is present.

Question: How to use vba to determine (quickly) if there is any data in a given column.

View 4 Replies View Related

Locate Data & Flag If Not Present

Oct 4, 2006

I have 2 named ranges that are one besides the other - let's name them tTableA and tTableB. I also have a strValue, which holds a String I will be searching for in tTableA.

Now, tTableA contains names (strings), while tTableB contains quantities (numbers) for the corresponding names.

I need a Button that, when clicked, will do this:

1) Check to see if the strValue string is present in tTableA:
1.1 If NOT present, tell the user "Error".
1.2 If present continue

2) Now that we know strValue exists in tTableA, find the corresponding quantity located in tTableB (this quantity would be on the same 'row' as the row in tTableA which contains strValue)
2.1 If quantity <= 0 then tell the user "Nothing left"
2.2 else REDUCE that quantity by 1 unit.

View 8 Replies View Related

Return Column Headings Where Data Is Present In Row

May 28, 2008

Is there a way I can return a column heading(s) if text is present in a row?

Refer the attachment... ozgrid.xls

Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???

View 5 Replies View Related

Formula That Runs A Macro When Data Is Present

May 12, 2008

I work on csv files which are created everytime someone makes a change in certain parameters used by a robot, however when opening these in excel they are nonsensical.

This can be changed with a few macros etc. but my manager would like it to be a "press one button and it works" procedure.

So what im looking for is some sort of function that checks if there is any data in the next column of the spreadsheet and runs a macro in that case and only that case.

View 9 Replies View Related

Return Column Headings Where Data Is Present In Row

May 28, 2008

is there a way I can return a column heading(s) if text is present in a row?

refer the attachment...

names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?

View 4 Replies View Related

Combination Chart: Present Source Data Differently

Sep 27, 2006

I've taken over a spreadsheet and been asked to produce various charts. One chart in particular asks for views of the following (hyperthetical) data from different workbooks on the same sheet

July 06 - 24%
June 06 - 22%
May 06 - 29%
April 06 - 21%

overlaid with this data

April 06 - 42
May 06 - 68
June 06 - 47
July 06 - 55

The problem I'm having is that firstly, the dates are presented the opposite way round, and secondly one set of data is in percentages, the other in basic integers. The spreadsheet data is large, and historically has always been done like this so it's not easy to change the way its presented, but is there an easy way to show it in a combination chart?

View 6 Replies View Related

Change Color Of Cells Depending On Data (format) Present In It?

Jan 11, 2013

I need change the color of the cell depending on the following conditions. (By the way the column will have names list)

1. single punctuations are allowed anywhere in name apart from first position.-->color should not change
2. If any name got consecutive punctuations --> color should change to RED.
3. Any punctuations apart from Dot(.), hyphen(-), apostrophe('), Space( ) are not allowed-->color should change to RED.

Example-
ShivakumaraNo Change
Shiva kumaraNo Change
Shiva'kumaraNo Change
shiva.kumaraNo Change
shiva kumarared
shiva''kumarared
shiva' kumarared
shiva. Kumarared
shiva.'kumarared
shiva:kumarared

View 4 Replies View Related

Insert Time Sheet Number Unless That Number Has Already Been Used?

Feb 16, 2014

I have a time sheet in which i need user to enter a time sheet number in cell c14

I need a formula for that cell so the user can input the time sheet number but only be able to do this if the time sheet number they are imputing is the next number in sequence of the last one used.

View 1 Replies View Related

Insert Number In Cell To Return A Set Number

May 2, 2007

I need this for a tracking sheet of scores. For example, 1 gets 100 points, 2 gets 90 points, 3 gets 80 points, etc. I need to set it up for 10 places. I have no idea and have fiddled with it for two hours now. I need to be able to put a 1 in the cell and 100 appears after I hit enter, etc.

View 5 Replies View Related

Copying Data From Recently Opened Workbook To Workbook Where Form Is Present

Jun 16, 2014

All i did was i just created a form to open a workbook from the directories.

Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!

View 2 Replies View Related

Find Data And Give A "yes" If Present

Feb 16, 2010

Column A contains multiple data, work order, account number, account name such as "#12345 555 hello"

I have a list of account numbers and want to see if or not these account numbers are listed in column B.

I tried =IF(ISERROR(SEARCH("555",a1)),"","Yes") and it did work for the one cell, but how can I change the search cell from H30 to an entire row? Also, is there a way to reference column B that has the list of account numbers instead of having to manually type in the 555? So, have it say something like this:
=IF(ISERROR(SEARCH(B1,A1:A30)),"","Yes")

View 9 Replies View Related

Pop Up Box To Insert A Number?

Oct 12, 2011

I have three colums on a spreadsheet the have a formula that calculates by taking the amount dividing it by 365 days then multiplying that by say 35 days. The day portion of the formula is the same in all cell in the three columns the number is the one this that changes by cell.

Is it possible to have a pop up box allowing the user to enter a number that will then be inserted into the formula. Instead of hitting F2 and manually entering the number.

View 3 Replies View Related

Insert Number 1 Through? Incrementing By One

Oct 8, 2008

I have a column that I want to insert number 1 through ? incrementing by one. Can I do this simply without having to type in each one manually?

View 4 Replies View Related

Insert Certain Number Of Columns

May 21, 2009

somehow i managed to do this at first and then forgot to save my personal work book and cant remember how to do it.

What it is, is if cell A1 has a certain phrase in it ie Customer Reference then i want to insert four columns before it so it ends up in cell E1.

The other thing which i never managed to do is. I have 5 workbooks. master, book 1-4. I want to past all info in columns A:T from Book 1-4 into Master in the next available row.

View 10 Replies View Related

Add Or Insert Number (1:50) To Row With No Duplication?

Nov 11, 2011

I've a list (Taken from this website; [URL] of 4900 rows with each row have 4 numbers if I want to add or insert one number( from 1 to 50 ) to each row with no duplicate to make it 5 numbers in each row? Is there a formula or Vb code to do this?

Code:
123411256212783129104121135512123161213147121543812162191217471012181911122023
12122230131224501412253315122641161227491712284218122932191234462012364421
1237392212384523124048241359251368261374427131013281311272913123630

[Code]...

To my calculation Numbers (1:50) have to be use 98 times;(50*98=4900) since each numbers in the list used 392 times(392/ 49 = 8)since there is no duplication when adding numbers (1:50) to rows each numbers must pair with evry other number in that list 8 times.at the moment with out adding the 5th number each number pairs with any other number exactly 24 times but adding process finish it should be 32 (24+8).

View 9 Replies View Related

Insert Specified Number Of Rows?

Jul 30, 2013

Is there a way to insert a specified number of rows. For example, I want to insert 500 blank rows today but maybe tomorrow it will be 650 blank rows.

View 1 Replies View Related

Insert New Row & Increment Number

Sep 10, 2006

I've created a spreadsheet that tracks problems using an assigned problem number. Attached is the spreadsheet.

I need assistance in inserting a new row and incrementing the sequential number after pressing the "Get/Assign New NCR Number" button. I am successful at getting a new row added, but am not able to increment the number. In addition, I would also like to have the table locked so that no deleting or amending the sequential number is allowed.

View 9 Replies View Related

Insert Row For Missing Number In List

Dec 19, 2011

We recently bought some new software at work, and I'm having trouble formatting the exported data in a way that will work with existing reports. The attached file is what the data looks like after being exported. Basically, what I'm trying to do is insert rows for the missing numbers -- i.e., each name should be followed by rows numbered 1 through 10.

John Smith John Smith
1 1
4 2
8 3
4
5
6
7
8
9
10

My ultimate end goal is to have columns of data for each name, instead of rows:

John Smith 1 2 3 4 5 6 7 8 9 10

I've created a formula that can do that part, but it operates on the assumption that each name will be followed by a set number of rows.

What little I know about vba I've learned on my own, so I may just be missing something obvious.

View 4 Replies View Related

Auto Insert Invoice Number?

Jan 21, 2007

I've created an Invoice Template in excel. Each time I open it I'd like a certian cell "D3" to increase by one number starting at 2000. Each time this is opened a new customer information is input and then saved to their file. Please give me the very basicis on how to do this. I've already gone into other forums which have provided a code, but I have had any luck getting ti too work.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved