I have several column of numbers with like-numbers grouped together. I need to insert a blank row after every group of numbers. For example:
883
883
(need a blank row inserted)
772
772
772
772
(need a blank row inserted)
991
(need a blank row inserted)
The ranges are all named but I don't know how to write a macro to put in the blank rows.
I want to change value if i change products from drop down list.....
For more information please find attached file: Book.xlsx‎
Insert Row At Every Change In Month. I have another doubt in that. My Problem is that thee are 2 columns containing Dates. What the Macro does is, it considers the Column A where the date is present. But my requirement is, that the Column E should be considered & Not Column A.
View 8 Replies View RelatedI have a set of data
TimeABC
110000
3802010
5802010
9602010
11603030
13404030
15204050
I want to run a macro that add a row if the values in A,B, or C change. Example, from time 1 to time 3, the value in both A,B, and C Change. I want to add a row between those 2 rows.
TimeABC
110000
310000
3802010
I also want to add a row if only one of them is changed. Example is between time 5 and 9.
TimeABC
5802010
9802010
9602010
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I have rows of data with each row going from column A to column P
They are sorted by column A (account No.)
I need to insert 2 blank rows between each change in account No.
I am trying to achieve a row insert based on matching criteria. I need to check a column of text values, and each time the text value changes, copy cells (a1:c1) and insert copied selection to the row before text change.
I am only concerned with the text in the first column. For example, I have a column with sometext in each row, when the row changes to somenewtext, I want to copy the header information and insert into row before the text changed.
Header1|Header2|Header3|
sometext
sometext
sometext
somenewtext
Searching the forums, I found conditional page breaks [url] and tried to adapt the code, but have been unsuccessful in getting it to work for my needs. I have tried the following, but cant figure out how to insert the rows in the correct place. Here is what I tried.
Sub cln()
Dim myRange As Range
Dim rngCell As Range
With Worksheets("pendingRpt")
Set myRange = .Range(.Range("A1"), .Range("A65536").End(xlUp))
For Each rngCell In myRange
If rngCell.Text <> rngCell.Offset(1, 0).Text Then
rngCell.Select
With Selection.Interior
Range("A1:C1").Select
Selection.Copy
Selection.Insert shift:=xlDown
End With
End If
Next
End Sub
I would like to have rows inserted before the beginning of each Month
Eg:
12/21/2006
12/21/2006
Insert Row
1/11/2007
1/11/2007
1/18/2007
1/18/2007
Insert Row
2/8/2007
Insert Row
3/1/2007
3/22/2007
Insert Row
4/5/2007
4/26/2007
4/26/2007
Insert Row
5/17/2007
I need a macro that will insert a new row after a change then copy the change to the adjacent column in the new row. I found this macro 'InsertAfterChange()' Insert Row After A Change In List which inserts the new row like I need, I just need to copy the changed value to Column "B" (or whichever is to the right of the column with the original value)
883
883
(need a blank row inserted, copy '772' to adjacent column in this new row)
772
772
772
772
(need a blank row inserted, copy '991' to adjacent column in this new row)
991
i mtrying to get a validation list change depending on what is chosen in another list. I have attached an example, Yellow box is my validation and weather List 1 or List 2 in chosen I want the red box to be a choose of the list attached to those options. I've tried to put an If in there but I’m al a loss.
View 3 Replies View RelatedI have spreadsheets I generate weekly that have 100s of rows. Everytime there is a data change in a certain column, I need the same row entered. I found a macro from this site that got me sort of half way.
I am trying to paste the macro that I found, but I am such an idiot I can't figure out how without it losing its formatting. Regardless, it only enters a blank row at every data change. Is there a way to enter a row with the same labels already entered in it?
Input:
A
B
CA001
CA001
CA001
CA002
[Code]...
Output:
A
B
CA001
CA001
CA001
CA001
[Code]...
1. Insert a row whenever cell value change.
2. Insert cell value (in previous column) in inserted row.
I have a large file that has the following setup
2003 Zipper X
2004 Zipper X
2005 Zipper X
2003 Zipper Z
2004 Zipper Z
2005 Zipper Z
How can I insert rows at changes in the product description
I currently have a macro that does several thing, i want to add another task.
I need a row inserted everytime there is a change in column H from "0" to "F" only. The infromation will always start in row 8 but the last row is not always the same, it will be different every time.
ABCDEFGHI112345678223456783#N/A#N/A#N/A#N/A#N/A#N/A#N/A45B=Bi-WeeklyID type 2ID Type 308 GAPamount due6HCCompanyS= Semi-MonthlyCO#NAMEFORMER (F) or Current (0)78546WalreBbr55a234amy01009524WalreSn32m56daniel05001041WalreS589653jode0100011945WalreBef343456caryF2001212WalreSg5365M5665mikeF40013Grand Total2,200.00
Im searching for a script to help me insert the current time value when a value within the row is changed. For example, if a value changes within the specified row, i.e. B1 changes, then within B12, the current date is inserted. However if B1 does not change then the old B12 value (old last change date) stays the same.
View 9 Replies View RelatedI have a list of data in column A. This is grouped by a set of key information and then subsets. The beginning of the key data is signified by the cell colour blue and then the subsets signified by the colour yellow. I want to insert a row just below the colour blue and enter the value " Header" and then when each colour is yellow, insert a row and enter "Subset 1" for the first and then "Subset 2" for the second etc.. The number of subsets can vary.
ABC Customer (Colour Blue)
Info
Info
Product 1 (Yellow)
Info
Product 2 (Yellow)
Info
Info
Product 3 (Yellow)
Info
XYZ Customer (Colour Blue)
Info
Product 1 (Yellow)
Info
Info
Product 2 (Yellow)
Info
Should be:..................
I'm not really all that familiar with a lot of things in Excel. I do know how to make a macro, which this question is to help with, but I kinda skipped a lot of learning in between.
I am wanting a shortcut that will insert a new row after each change in column A. I don't think Subtotals is the answer because after I enter the row to seperate them I will want to enter another row and seperate again by column F when there is a change that is not a blank row.
I need to loop down a column of data containing branch numbers and whenever there is a new branch, I need to insert a row both before and after the last instance of the previous brance. For example:
If the first three rows in the column contain branch 0001 and the forth row starts with branch 0002, I need to insert a row both before and after the 0001 in row three...
Column A of my spreadsheet consists of Subcase 1000 to Subcase 1010 for example, with up to as many as 100 repetitions of each subcase in consecutive order. See Below:
Subcase 1000
Subcase 1000
.
.
.
Subcase 1001
Subcase 1001
.
.
.
Subcase 1002
Subcase 1002
.
.
etc
I would like a macro to find where Subcase 1000 finishes and Subcase 1001 begins and then insert 2 new rows between them. These 2 new rows have to be inserted between any change found in the column A field. The searching of Column A should start at Row 15. I have uploaded an example file. This file contains 2 sheets, 'Before Macro' and 'After Macro'. Hopefully it outlines what the outcome of the macro should look like.
I've posted this thread in http://www.excelforum.com/excel-prog...ml#post2038238 but since the thread has been solved, I think nobody would look into my problem, so I'm creating a new thread for the purpose.
My previous thread:
Hi there,
I'm looking for the same idea only that I wanted the macro to select the data in the cells selected. Based on the code given by StephenR above, I tried to do some modification but I don't know how to make it to start from the first cell of my selection, not from row 15 as R_S_6 wanted. The range selection can be in any column. Here are the code that I used:
I have a spreadsheet that has the date in one cell. I want the date to remain static unless I make a change. ie, when I first create the sheet I want a static date to go into this cell. Then I only want this date to change if any changes are made to the workbook (several sheets), I dont want the date to change everytime I open the spreadsheet. It must however update if I make any changes to particular cells on various sheets.
View 9 Replies View RelatedI have a button and when I press it, it shows a tick so the user knows when it's been clicked I also want it to insert the date it was clicked but obviously if I use the =TODAY() formula it would change everyday. I need to keep it the same after each day.
View 3 Replies View Relatedwhat I am looking to do is when in colum AA a cell changes to "Drawdown" I'd like the cells in column A:D,F,H:L,N:Q,S:Z on the same row to grey out and a line to be insert below the cell that was changed, if it selects "Fee" , cells in A:D,F,H:L,N:Q,S:Z on the same row.
I have writen the following butit seems rather cumbersome and I can not get the insert line to work.
Code:
Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim IntersectRange As Range
Set WatchRange = Range("AA1:AA500")
Set IntersectRange = Intersect(Target, WatchRange)
[code].....
We recently bought some new software at work, and I'm having trouble formatting the exported data in a way that will work with existing reports. The attached file is what the data looks like after being exported. Basically, what I'm trying to do is insert rows for the missing numbers -- i.e., each name should be followed by rows numbered 1 through 10.
John Smith John Smith
1 1
4 2
8 3
4
5
6
7
8
9
10
My ultimate end goal is to have columns of data for each name, instead of rows:
John Smith 1 2 3 4 5 6 7 8 9 10
I've created a formula that can do that part, but it operates on the assumption that each name will be followed by a set number of rows.
What little I know about vba I've learned on my own, so I may just be missing something obvious.
I have the following vb to insert a row above every row in an autofiltered list (autofiltered for nonblanks).
Problem is that if in the autofiltered list there is not a gap then it inserts a row for each line where there is no gap
SO for instance if in the filtered list cell A500:a505 have no gaps between them (meaning all are nonblanks) the vb will insert 6 rows above A500 and leave no rows inserted above a501, a502, ...etc
I have approx 10,000+ rows and there are approx 550 rows that I need to insert a row above (but want to automate/save time) by having the vb do it.
Code:
Sub InsertRow()
' Insert a row between each Client/Cycle
'Will have some manual cleanup after this step
[Code].....
On my worksheet I am trying to insert a dropdown list in column B and the options available in this list are dependent on what is selected from another dropdown list in column A.
I have another spreadsheet in which I have done exactly the same thing. In this first sheet I use the methodology in column B of through Data Validation allowing a List and setting the Data Validation Source as =INDIRECT(“L”&A2) where L refers to my possible selection of lists for column B (these lists are called L1, L2, L3, L4 etc and have been defined as such). This then generates a list of options in the cell B2 dropdown list dependent on what the text is in A2. This A2 value has also been selected from a list.
Now – when I tried to use exactly the same methodology in my new sheet IT DOES NOT work – AARRGGHH !!! When I select a value from the list in column A, then go to the dropdown list in column B there are no options to choose from – it is as if the dropdown filter in column B has become inactive. The selection downwards arrow is there, but when I click on it.
if it is possible to have a selection from a list change the list for another cell?
For example, if I have a drop down list in A1 which is "Apples, bananas, pears", and I select "Apples", is it possible for A2 to have a list of "Green, Red, Yellow", and if I select "Bananas" in A1, for A2 to have a list of "Yellow, Black, Blue"?
I'll set up the situation first: I have a group of cells (arranged in a esthetic manner) across several rows of columns. For example, column A1 to N1, rows 1 to 5.
I'm hoping to set up a drop-down list in a cell (we'll use A2 as an example), with different options that will determine what text is displayed in different cells in the group when the user selects it.
For example, if I selected option 2, it would display different text in cell B4 than if I choose option 1. Again for option 3, etc.
If this is at all possible, there is an additional question. Can this format also insert drop-down lists, instead of text, in select cells?
I have is a list of data with headers
mold # casting date manufacturer condition
and have about 150 entries for each column.
What i want to do is to store data to the next available row in that list by entering "w x y z" in columns A1 B1 C1 D1.
Then when i have new data ww xx yy zz, i again want to enter it in columns A1 B1 C1 D1 and automatically have it stored beneath my last entry at the bottom of the original list.
I am trying to automatically insert multiple (100) worksheets using VBA. The names I need each worksheet to be named are in a list in a separate worksheet in the same workbook. I found this site: http://www.mindspring.com/%7Etflynn/excelvba3.html and have been trying to adapt the following
Sub AddSheetWithNameCheckIfExists()
Dim ws As Worksheet
Dim newSheetName As String
newSheetName = Sheets(1).Range("A2") ' Substitute your range here
For Each ws In Worksheets
If ws.Name = newSheetName Or newSheetName = "" Or IsNumeric(newSheetName) Then
MsgBox "Sheet already exists or name is invalid", vbInformation
Exit Sub
End If
Next
Sheets.Add Type:="Worksheet"
With ActiveSheet
.Move after:=Worksheets(Worksheets.Count)
.Name = newSheetName
End With
End Sub
I am having difficulty iterating the code from cell A2 to A102.