Insert The Data Entry Into The Next Available Spot In A List
Apr 17, 2009
I have is a list of data with headers
mold # casting date manufacturer condition
and have about 150 entries for each column.
What i want to do is to store data to the next available row in that list by entering "w x y z" in columns A1 B1 C1 D1.
Then when i have new data ww xx yy zz, i again want to enter it in columns A1 B1 C1 D1 and automatically have it stored beneath my last entry at the bottom of the original list.
View 9 Replies
ADVERTISEMENT
Mar 17, 2014
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
View 2 Replies
View Related
Nov 21, 2006
This is what I am writing
Sub Macro5()
....
End Sub
It is not doing what I want it to which is to find data in a certain spot on 1 sheet and copy to my database sheet and repeat until it finds the first blank cell. I have gotten much help on this to help me understand the functionallity but I don't understand vba enough to build the macro myself.
View 9 Replies
View Related
Sep 11, 2013
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
View 3 Replies
View Related
Apr 28, 2009
I have made a spreadhseet that track what games an official referees (sheet 1), what games they are touch judge 1 for (Sheet 2) and what games they are touch judge 2 for (sheet 3).
Sheet 4 then adds all these up for me and tells me as an good approximate estimate how much each official should get paid in way of expenses.
Simple enough so far.
I have a list of 3 letter codes on sheet 4 for each official that I put in the matrix of games. It's using these 3 letter codes that it adds it all up. This works fine
How can I get it to tell me if any 3 letter codes entered into the matrix (Sheet 1!D4:CD82) Do not match my list (Sheet 4!A5:A71). (an error detection system if you like).
To make it more interesting I would like it to ignore blank cells (games not played yet).
I'm not bad on excel formulas, but I can't get my head around how to do this.
View 6 Replies
View Related
Jul 2, 2013
I have a scenario where a cell has to be restricted based on the user input of another cell, also it should allow only Yes or No values.
ex:column A
column B
pending response
submitted
User should be allowed to enter a value in column B as "yes" or "No" only when column A has a value "Submitted"
I referred the thread to restrict entering the data [URL]...
However not able to add list as well.
View 2 Replies
View Related
Feb 15, 2010
this are function which button needs to be able to do after clicking on it.
• When the value of only one of Description or Unit/Price is entered, a warning message appears.
• When the message is confirmed, return to the entry status for the new data.
• When the values of both Description and Unit/Price are entered, save the values in the list of product (worksheet Product), and increase Product No. by 1 and erase values from NewProduct worksheet this is the screen how it should look but button which should be able to do all the thing above at once is called List Entry
[url]
after creating this function all the values from the table product need to be update into another table which sould look like that:
[url]
Is there anyone how could write code which will do thing above?
in the attachemnt is the excel file which shows what I have done so far, as i am not a good programmer,so I do not know if it's right
View 7 Replies
View Related
Dec 17, 2007
I need to create a Drop Down Menu that gets it's data from another group of cells. I have done this before but it has been sometime ago and now I can't remember.
View 3 Replies
View Related
Nov 4, 2008
I have a spreadsheet which I am trying to use to capture customer data. What I want to happen is whenever I enter a new record, the date appears automatically in a Date column ....
View 6 Replies
View Related
Mar 18, 2014
I have created a excel workbook in which I use for keeping up with storage unit rent. I have a tenant list sheet and each tenant has a sheet on which I keep up with charges and credits. What I want is a macro the will loop thru each tenants sheet based on tenant list and insert data and go to the next sheet. I found this on the web:
[Code] ......
View 1 Replies
View Related
Aug 10, 2008
I'm working on a simple worksheet, it is a tracking sheet for programs taught. What I'm trying to find is a code to insert a row based on a Data Validation List.
Exampl of data:
Column A is for " Name" then futher down Column K is "Program Taught" and Column L is " Date Taught".
Column K is where the Data Validation List is located with a in cell drop down.
What I would like to do is when a user selects a program from Column K a row is inserted with all of the formulas and formats from the previous row, and upon insert would like it to copy Column A into the new row.
This would be so I can keep a historical of programs and dates taught.
And to really spice things up I want to lock Columns K & L of the previous row after the new row is inserted.
View 4 Replies
View Related
Jul 6, 2006
Is there a way you can copy formulas to the next line when a new entry is automatically added to a spreadsheet via a form?
View 1 Replies
View Related
Jan 3, 2012
I have a spreadsheet with a summary tab, a tab named AAA and a tab named ZZZ. The data tabs are found between tabs AAA and ZZZ
On the summary tab, there are rows that pull total info from the tabs between AAA and ZZZ.
The problem is, if I add a new tab between AAA and ZZZ, I have to remember to add a new row on the Summary tab for this new tab.
how I can flag it if a new tab is added, but no corresponding new row on the summary tab? I'm not sure whether I want it to flag it, add it automatically or what..............?
View 8 Replies
View Related
Oct 5, 2009
i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
View 9 Replies
View Related
Jun 7, 2013
I am having a table like this
col1
col2
col3
Col4
[Code].....
I need to test each cell for text and to copy that text into another place (lets say sheet 2). Size of table is variable and here is what i come up up till now
VB:
Sub MoveText()
Dim WBook As Workbook
Dim WSheet As Worksheet
[Code].....
View 7 Replies
View Related
May 7, 2014
I am needing a custom format for the following. I need a cell entry to be 1 letter, three numbers, a dash, 5 numbers, a dash, two numbers, a dash, and then two number. Example: A109-54785-13-00. The first letter will almost always be an "A."
To further complicate the matter, the entry is copied from an email and pasted without the dashes. In the above example, the number in the email would read, "A109547851300." I copy it from the email and paste it in the proper cell in the worksheet. I would like the custom format to automatically enter the dashes at the appropriate spot.
If it was all numbers, this would be easy. I created a custom format for the numbers, but when the A is included, Excel no longer treats it as a number and the custom format did not work.
Is this possible in Excel (without VBA).
I could use the custom number format I created and then later go back and add the "A" at the beginning, but that is as much work as manually adding the dashes.
View 2 Replies
View Related
Mar 8, 2007
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
View 4 Replies
View Related
Apr 2, 2012
I'm trying to create a spreadsheet that will add a value to one column from one specific cell. For example: I want to enter a name in cell G10 and add that entry value enters in A1, then erase that name and enter a name in G10 again and that entry value enters in A2, and so on and so forth.
View 2 Replies
View Related
Oct 9, 2012
How prevent duplicate when entry from list?
Attachment file : testing.xlsx
View 1 Replies
View Related
Oct 20, 2008
I have a list of account balances in one column. How can I pick up only the bottom number in that column? I have 20 worksheets and want a total across all worksheets of the last number listed in a particular column but each worksheet is different because they contain a different number of rows with activity. So, if in col. C I have:
$482
$1,000
$899
$456
$231
... then I want $231 to be what is captured for that worksheet, but if the 2nd worksheet contains:
$500
$1000
$344
... then I want $344 to be what is captured for worksheet 2. Does that make sense. In the end I want to sum $231, $344.... etc.
View 3 Replies
View Related
Feb 18, 2014
I am trying to reset various (data validation) drop down lists in a the dummy worksheet attached. Most of the code i have come across clears the cells completely, however i would like it to return to the 'select' option (first on the list) in the list.
I have come across this code, but it does not seem to work:
[Code] .........
I want the clearing code to run from the command button in the 'instructions' tab to clear the drop down lists in the '1. Inputs' tab.
Attached File: Reset drop down list.xlsm‎
View 4 Replies
View Related
Dec 16, 2008
First post here and I hope to find a solution
I have 2 columns with data. The first one has 16000 data (6 digit numbers), which are 2 or 3 or 4 times the same (duplication). The second column has a list with name folders.
Question: How can I delete the duplicate/triplicate entries, and leave only the one I want, according to a priority list I have of name folders?
View 9 Replies
View Related
Aug 19, 2009
I have a database file with a list of components. Each component has manufacturers name, part number, description etc. I need to create an individual file from each of the components in the list. I would like a quick and easy way to copy the information in each Row and generate a new file for each Row containing the existing template I have.
View 9 Replies
View Related
Jun 30, 2008
I am using Control Tool box combobox in worksheet.How to change the Combobox to Non Editable combobox?
View 3 Replies
View Related
Feb 4, 2014
I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.
[Code] ....
I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.
Attached File : Copy of Referal Tracker.xlsm‎
View 3 Replies
View Related
Jun 1, 2009
I currently have showing 800 suppliers in a List Box... sadly when having to search for a sepcific supplier this seems to be very fustrating and time comsuming for people in the Company.
I have tried the method of copying all of the Supplier above the list, so it can do an AutoComplete filter, but the data needs to be exact.
What i would really like is if i was to type the letter "V" in the cell, it would be able to provide me with a list of the "V" suppliers in a list.
View 9 Replies
View Related
Jul 2, 2007
Suppose I have a department List, and I made a list from that column (Department List), and I enter more staff and selected a department for them during registering, now one of the Department List Item change, How is it possible to change all the entry which has that department?
For more info see the attachment.
View 7 Replies
View Related
Aug 27, 2009
I am trying to match some strings, to see if an entry is already included in a master list or not. I'm running into problems with some cells that have the EXACT same string, from what I can tell (a text ticker symbol) yet a MATCH or VLOOKUP won't return anything. Has anyone ever encountered anything like this? Worksheet attached with an example
View 3 Replies
View Related
Aug 31, 2009
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
View 2 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
