Insert Row Above A Range And Copy Range Value To New Row
Mar 29, 2013
I have a number of spreadsheets (12) that feed a summary sheet. The 12 sheets derive their static information from the summary, e.g. item names, dates, etc. While data is input into the 12 sheets.
I am trying to create a macro that will add a row, for a new item, in all of the sheets. I have a range defined below the last row of the items section that needs to be copied to the new row - this is not the last row of the spreadsheet. Each sheet has a different range name as they are for different periods.
I have another little VBA macro problem that appears to be beyond my coding knowledge.
I have attached a small excel spreadsheet, with a macro recorded (CTRL-P) of what I'm trying to accomplish. Basically, If the data in column A matches a single entry in column F, I need to copy and insert the row (columns F-L) that matches.
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to: 1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
What is the proper syntax for working with a Range with to name it after the PasteSpecial command? The Selection approach I am trying here does not seem to work unless I am currently within the same workbook.
[URL]
VB: Sub Create_Dashboards() With Sheets("Revenue Model") 'Strat Plan Revenue .Range("J2:S9").CopyPicture .Range("A42").PasteSpecial Selection.Formula = Range("J2:s9").Address Selection.Name = "Strat Plan" 'more code here End With End Sub
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
1. I have two workbooks (eg. workbook1 and workbook2) 2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20). 3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
ID project Custodian 1 ABC James Johns 2 DEF John Doe 3 GHI Laura DiNapoli 4 JKL Lydia Koernell
I need to be able to display the custodians in column C on sheet1 ("Case Preview")
in sheet2("Search Term Breakdwn") starting in B10,C10,D10,etc until all the names in column C are there. The tricky part is that column C gets populated each month with different custodians coming from different dbs, so I have to be able to know how many rows in column C are populated with info.
I saw a few postings here regarding transpose and tried to used it, but to no avail.
I am using the following
Sub copyrows()
Dim MySheet As Excel.Worksheet Dim MySheet2 As Excel.Worksheet Dim rcell As Range
I know how to type the range name in a formula e.g. a VLOOKUP
I want to be able to type the name of the range TEST in an empty cell (say D1) and in another cell say D5 have a formula e.g. =VLOOKUP(A1,TEST,2,0) look at that word and use the word in the formula.
So if I change the word in D1 to DATA (which is the name of another range I have created) then the VLOOKUP in D5 changes to =VLOOKUP(A1,DATA,2,0)
I have a range of names which are sorted alphabetically. I need a procedure that will find where a new name entered via a textbox will reside, insert a blank row into the range, and insert the name into the blank cell within the range.
How would I modify the code belwo to insert the copied range above the existing data in the worksheet? (The part giving me the problem is in bold italics.) Also, how would I modify this code so that it only copies the filtered data, NOT including the column headers?
I have some data generated from same sample as listed below:
A: Amplitude
Time Time(hours) Y (A1) SD (A1) Y (A2) SD (A2) Y (A3) SD (A3) 3.97 95.28 0.01 0.00 0.01 0.00 0.01 0.00 3.98 95.53 0.01 0.00 0.01 0.00 0.01 0.00 3.99 95.78 0.01 0.00 0.01 0.00 0.01 0.00
B: Beat
Time Time(hours) Y (A1) SD (A1) Y (A2) SD (A2) Y (A3) SD (A3) 3.97 95.28 1.00 0.00 0.01 0.00 0.01 0.00 3.98 95.53 2.00 0.00 0.01 0.00 0.01 0.00 3.99 95.78 3.00 0.00 0.01 0.00 0.01 0.00
Is there any easy macro to combine data under A and B. For example:cut A1 data under B:Beat and insert it after A1 under A:Amplitude; cut A2 data under B:Beat and insert it after A2 under A:Amplitude, et al?
I am trying to write a code which automatically inserts the users username in a cell once a macro button is pressed.
Sub Approve() If ThisWorkbook.HasRoutingSlip = True Then With ThisWorkbook.RoutingSlip .Delivery = xlOneAfterAnother Sheets("infosheet").Select .Subject = "Here is " & ThisWorkbook.Name .Message = "Here is the workbook. What do you think?" End With Workbooks("myfile.xls").Route End If .....................
On sheet "Kilo" I have 2 command buttons one "insert" and one "delete". I would like the insert button to work as if it was being utilized as if it was still on the "Nom roll" sheet. If I use the button on kilo as is it messes up the Kilo sheet.
i am trying to insert a formula into a range of cells using a For... to loop
This is what it looks like:
VB: For i=1 To n Worksheets("Ret_sheet").Cells(i, 8).Formula = "=if(mid(B" & i & ",3,1)=""A"",""PY Campaigns"",mid(B" & i & ",4,3)" Next i
The row with the formula returns a syntax error.
what the right syntax is? I have read a lot about inserting a formula in a cell using VBA, but i never met the case with a counter (i) usage. I guess the problem might be there.
I have run into a problem with a Pivot Table overwriting other content when new data is added and refreshed.
This pivot table is included across a range of "Product" worksheets. To resolve this issue I would like a macro to insert a new row below the pivot table , this way when new content is added the pivot table will not overwrite the content below it.
The Pivot Table data is on the "Client" worksheet. Each Product worksheet includes a Pivot Table referencing the the Client data. I would like to force a user to add a new client data with a macro this way I can force a new row to be inserted across All "Product" worksheets.
I need a VBA code for a worksheet to automatically insert cut paste a row from a range of unprotected rows to the range of protected rows once the user decides to do so.
I have a sheet called "Customer Stock" which has two tables called "Uncollected" and "Collected".
I need "Uncollected" table to be unprotected and "Collected" Table to be protected.
Once the a Customer collects the goods, the user can cut and insert the collected row from the unprotected "uncollected" table to just above the first row of the protected "collected" table,
so that the inserted cut row now should be protected.
The password should be 1234 and the user won't know the password. Only the administrator will be having it.
